• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.32-38
• /
• 2007

In this study, a new algorithm for measuring the velocity and distance from a camera to a moving object by using pseudo-stereo images obtained from a single camera with a stereo adapter is proposed. The proposed system is similar to a parallel visual stereo system using a two-camera system, but because this system can obtain pseudo-stereo images form a single camera, it has advantages not only in the aspect of cost but also in stereo conformity by arrangement and the calibration of the left and right stereo cameras upon image processing.

• 한국정보통신학회논문지
• /
• 제19권9호
• /
• pp.2138-2144
• /
• 2015

멀티모달 다중 카메라 시스템은 동일 기종이 아닌 적외선 열화상 카메라와 광학 카메라를 이용하여 구성한 스테레오 형태의 시스템이다. 본 논문에서는 열화상 카메라와 광학카메라에서 동시에 인식이 가능한 전용 타겟을 제작하여 스테레오 보정을 진행하였다. 일반적인 스테레오 교정에서는 두 카메라 사이의 내부 파라미터와 외부 파라미터를 이용하여 교정을 진행 하지만, 본 연구에서는 각각의 영상에서 코너점을 검출하고, 검출된 코너점의 좌표를 이용하여 두 영상 사이의 픽셀 오차율, 영상의 회전정도 및 영상의 크기 차이를 구한다. 이를 이용하여 기하학적 변환중 하나인 어파인 변환을 이용하여 보정을 진행 하였으며, 최종적으로 보정된 영상에 매핑되는 영역을 재구성하여 최종 결과 영상을 구했다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.

• 한국전자통신학회논문지
• /
• 제16권6호
• /
• pp.1311-1316
• /
• 2021

본 논문에서는 이중시점 스테레오 이미지와 그에 상응하는 깊이맵을 생성하기 위해 서로 다른 초점거리를 가지고 있는 두 카메라를 결합한 이중시점 스테레오 카메라 시스템을 제안한다. 제안한 이중초점 스테레오 카메라 시스템을 이용해 깊이맵을 생성하기 위해서는 먼저 서로 다른 초점을 가진 두 카메라에 대한 카메라 정보를 추출하기 위한 카메라 보정(Camera Calibration)을 수행한다. 카메라 파라미터를 이용해 깊이맵 생성을 위한 공통 이미지 평면을 생성하고 스테레오 이미지 정렬화(Image Rectification)를 수행한다. 마지막으로 정렬화된 스테레오 이미지를 이용하여 깊이맵을 생성하였다. 본 논문에서는 깊이맵을 생성하기 위해서 SGM(Semi-global Matching) 알고리즘을 사용하였다. 제안한 이중초점 스테레오 카메라 시스템은 서로 다른 초점 카메라들이 수행해야 하는 기능을 수행함과 동시에 두 카메라를 이용한 스테레오 정합(Stereo Matching)을 통해서 현재 주행 중인 환경에서의 차량, 보행자, 장애물과의 거리 정보까지 생성할 수 있어서 보다 안전한 자율주행 차량 설계를 가능하게 하였다.

• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.200-207
• /
• 2001

Three-diemnsional bead profile was measured using the biprism stereo vision sensor in GMAW, which consists of an optical filter, biprism and CCD camera. Since single CCD camera is used, this system has various advantages over the conventional stereo vision system using two cameras such as finding the corresponding points along the horizontal scanline. In this wort, the biprism stereo vision sensor was designed for the GMAW, and the linear calibration method was proposed to determine the prism and camera parameters. Image processing techniques were employed to find the corresponding point along the pool boundary. The ism-intensity contour corresponding to the pool boundary was found in the pixel order and the filter-based matching algorithm was used to refine the corresponding points in the subpixel order. Predicted bead dimensions were in broad agreements with the measured results under the conditions of spray mode and humping bead.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.129-134
• /
• 2003

Mobile Mapping System needs system calibration of multi sensors. System calibration is defined as determination of spatial and rotational offsets between the sensors. Especially, EO parameters of GPS/INS require knowledge of the calibration to camera frame. The calibration parameters must be determined with the highest achievable accuracy in order to get 3D coordinate points in stereo CCD images. This study applies Boresight calibration for the calibration between GPS/INS and camera, and estimates the Performance of the calibration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.603-605
• /
• 2005

In this paper, we deal with a calibration method for low cost motion capture sensor using PSD (Position Sensitive Detection). The PSD sensor is employed to measure the direction of incident light from moving markers attached to motion body. To calibrate the PSD optical module, a conventional camera calibration algorithm introduced by Tsai. The 3-dimensional positions of the markers are measured by using stereo camera geometry. From the experimental results, the low cost motion capture sensor can be used in a real time system.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.83-83
• /
• 2004

The analysis of relative pose(position and rotation) between stereo cameras is very important to determine the solution that provides three-dimensional information for an arbitrary moving target with respect to robot-end. In the space of free camera-model, the rotational parameters act on non-linear factors acquiring a kinematical solution. In this paper the general solution of active stereo that gives a three-dimensional pose of moving object is presented. The focus is to achieve a derivation of linear equation between a robot′s end and active stereo cameras. The equation is consistently derived from the vector of quaternion space. The calibration of cameras is also derived in this space. Computer simulation and the results of error-sensitivity demonstrate the successful operation of the solution. The suggested solution can also be applied to the more complex real time tracking and quite general and are applicable in various stereo fields.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.89-90
• /
• 2004

The analysis of relative pose(position and rotation) between stereo cameras is very important to determine the solution that provides three-dimensional information for an arbitrary moving target with respect to robot-end. In the space of free camera-model, the rotational parameters act on non-linear factors acquiring a kinematical solution. In this paper the general solution of active stereo that gives a three-dimensional pose of moving object is presented. The focus is to achieve a derivation of linear equation between a robot's end and active stereo cameras. The equation is consistently derived from the vector of quaternion space. The calibration of cameras is also derived in this space. Computer simulation and the results of error-sensitivity demonstrate the successful operation of the solution. The suggested solution can also be applied to the more complex real time tracking and quite general and are applicable in various stereo fields.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1458-1463
• /
• 2004

Tracking is one of the most important pre-required task for many application such as human-computer interaction through gesture and face recognition, motion analysis, visual servoing, augment reality, industrial assembly and robot obstacle avoidance. Recently, 3D information of object is required in realtime for many aforementioned applications. 3D tracking is difficult problem to solve because during the image formation process of the camera, explicit 3D information about objects in the scene is lost. Recently, many vision system use stereo camera especially for 3D tracking. The 3D feature based tracking(3DFBT) which is on of the 3D tracking system using stereo vision have many advantage compare to other tracking methods. If we assumed the correspondence problem which is one of the subproblem of 3DFBT is solved, the accuracy of tracking depends on the accuracy of camera calibration. However, The existing calibration method based on accurate camera model so that modelling error and weakness to lens distortion are embedded. Therefore, this thesis proposes 3D feature based tracking method using SVM which is used to solve reconstruction problem.