• 제목/요약/키워드: Step-by-step Split

검색결과 86건 처리시간 0.022초

다중 문턱치를 이용한 입술 윤곽 검출 방법 (Lip Contour Detection by Multi-Threshold)

  • 김정엽
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제9권12호
    • /
    • pp.431-438
    • /
    • 2020
  • 본 논문에서는 입술 윤곽선을 검출하기 위한 다중 문턱치 기반의 검출방법을 제안하였다. 기존의 연구 중 Spyridonos 등이 제안한 방법은 입력영상을 RGB로부터 YIQ 좌표계로 변환하여 Q 성분만을 이용하여 Q 영상을 얻는다. Q 영상으로부터 변화 점 검출을 통하여 입술 모양의 좌우 끝점을 얻어낸다. 좌우 끝점에 대한 수직 좌표의 평균값을 이용하여 Q 영상을 상하로 분리하고, 상하 영역 각각에 대하여 별도로 Q값을 대상으로 문턱치를 적용하여 후보 윤곽선을 추출한다. 추출된 후보 윤곽선에 특징치 거리를 이용하여 최적의 문턱치를 찾고, 해당하는 윤곽선을 최종 입술 윤곽선으로 결정한다. 이 때 사용되는 특징치 거리 D는 후보 윤곽선 상의 점들을 기준으로 주변 영역에 대한 차이의 절대값을 이용하여 계산한다. 기존연구의 문제점은 세 가지인데, 첫째는 입술 끝점 추출 과정에서 피부영역의 과다한 참여로 입술 끝점의 추출의 정확도가 감소하고, 따라서 후속되는 상/하 영역 분리에도 영향을 미친다. 둘째는 YIQ 칼라 좌표계를 사용하였는데, 다양한 칼라 좌표계에 대한 분석이 미비하므로 추가적인 분석이 필요하다. 세 째, 최적 윤곽선의 선택 시 적용하는 거리 값 파라미터의 계산 과정에서, 문턱치를 적용하여 구한 해당 윤곽선 주변의 데이터들에 의한 변화분을 계산하여 변화가 가장 큰 윤곽선을 입술 후보로 채택하는데, 변화분의 최대치를 기준으로 하기 때문에 검출된 입술영역이 기준보다 축소되는 문제점이 있다. 첫 번째 문제점을 해결하기 위하여 피부영역의 계산과정 참여를 줄여서 성능을 30%정도 향상시켰다. 두 번째는 YIQ 외에 HSV, CIELUV, YCrCb 등의 칼라 좌표계에 대한 성능테스트를 거쳐 기존연구 방법이 칼라좌표계에 대한 의존성이 없음을 확인하였다. 세 번째는 윤곽선 주변의 변화분 검토 시, 윤곽선 포인트 당 변화분의 평균값 대신에 변화분의 총량을 적용하여 46% 성능개선 효과를 얻었다. 이상의 내용을 모두 적용하여 제안한 통합방법은 기존연구 대비 2배의 성능향상과 안정성을 확보할 수 있었다.

비디오 암호화를 위한 여원 최대길이 셀룰라 오토마타 (Complemented Maximum-Length Cellular Automata Applied on Video Encryption)

  • 이고용;조성진;김석태
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권1호
    • /
    • pp.13-18
    • /
    • 2017
  • 인터넷기술의 발전에 따라 데이터를 보호하려는 연구가 점점 중요하게 되었다. 데이터를 보호하는 방법의 하나로서 본 논문에서는 여원 MLCA(Complemented Maximum Length Cellular Automata) 기법을 이용한 비디오 암호화 방법을 제안한다. 먼저 CA규칙 90/150을 이용해 여원 MLCA의 상태 전이행렬 T를 만든 후, 2D 여원MLCA의 기저영상을 생성한다. 다음, 비디오영상을 다중프레임으로 나눈다. 마지막으로 여원 MLCA 규칙을 이용하여 생성한 기저영상과의 XOR 연산으로 최종 암호화된 비디오영상을 얻게 된다. 이러한 방법은 영상 데이터를 시각화하기 위한 영상의 기본 정보인 픽셀의 값을 변환시키기 때문에 기존의 암호화 방법보다 향상된 암호화 결과를 얻을 수 있다.

늦은 용액증발법으로 제작한 유기단결정 para-toluene sulfonate의 비선형 광학상수 측정 (Measurement of nonlinear optical constant of organic single crystal para-toluene sulfonate prepared by slow solution evaporation method)

  • 황보창권
    • 한국광학회지
    • /
    • 제9권2호
    • /
    • pp.76-85
    • /
    • 1998
  • 서서히 용액을 증발시키는 늦은 용액증발법을 이용하여 유기단결정 p-toluene sulfonate(PTS) 덩어리와 박막을 제작하였다. 유기 단결정 PTS 덩어리는 Z-scan 방법을 이용하여 1600 nm, 95fs 레이저 광으로 3차와 5차 비선형 굴절률 $n_{2}$$n_{3}$를 측정하였으며, PTS 박막 도파관에서는 다중모드 출력을 관측하였다. 입력광의 세기가 2~5 GW/$cm^{2}$영역에서 PTS의 비선형 광학계수는 $n_{2}=6{\times}10^{-4}cm^{2}$/GW, $n_{3}=-7{\times}10^{-5}cm^{4}/GW^{2}$이고 2광자 흡수와 3광자 흡수는 없었다. 빛의 세기가 강한 5~16 GW/$cm^{2}$영역에서는 비선형 슈레딩거식과 빠른 푸리에변환 광전파방법을 이용하여 시료 내에서 전파광의 모양이 가우시안 광에서 왜곡되어 전파되는 것을 전산모의하였다.

  • PDF

Gutta percha 충전시 도말층 유무에 따른 근관벽과의 접합도에 관한 주사전자현미경적 연구 (A SCANNING ELECTRON MICROSCOPIC STUDY ON THE ADAPTATION OF ROOT CANAL FILLING MATERIAL TO ROOT CANAL WALL WITH AND WITHOUT SMEAR LAYER)

  • 문주훈;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제17권2호
    • /
    • pp.365-382
    • /
    • 1992
  • The purpose of this study was to evaluate the adaptation of filling material to the dentinal walls of root canals with and without smear layer. Fifty extracted upper and lower anterior teeth were selected, and the root canals were instrumented with K - files 1mm short of the apical foramen by step - back method. The teeth were randomly divided into two groups of 25 each : in the group I, smear layers were not removed, and in the group II, smear layers were removed by 15% EDTA solution. Again the two groups 25 teeth were randomly divided into unfilled contol group and filling groups(lateral, ultrasonic, ULTRAFIL, McSpadden compaction group). Upon completion of root canal filling, the teeth were grooved on the both the labial and lingual surfaces and then split with mallet and chisel. Each specimens were examined with JSM - 840 Scanning Electron Microscope (JEOL., Japan). The results were as follows : 1. In the contol group, dentinal tubules of group I couldn't be distinguished in the canal wall, but those of group II appeared to be open and patent. 2. In the filling groups of group I, the tubular penetration of the sealer or gutta percha couldn't be seen, but in the filling groups of group II, it could be seen except McSpadden compaction group. 3. In the filling groups, ULTRAFIL group showed the best adaptation of filling material to root canal wall among the group I, and lateral and ultrasonic condensation group showed the best adaptation of filling material among the group II. McSpadden compaction group showed the worst adaptation in group I, II. 4. Generally, the group II showed better adapation of filling material to root canal wall than the group I.

  • PDF

Feeding and Management System to Reduce Environmental Pollution in Swine Production - Review -

  • Han, In K.;Lee, J.H.;Piao, X.S.;Li, Defa
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권3호
    • /
    • pp.432-444
    • /
    • 2001
  • In this manuscript, several effective feeding and management systems to reduce environmental pollution in swine production have been briefly introduced. It is logical that reducing the excretion of nutrients in manure should be the first step to reduce the environmental impact of pig production. it is evident that the excretion of nitrogen and phosphorus can be reduced when more digestible or available feedstuffs are used. Also, it is well known that proper feed processing can reduce anti nutritional factors (ANF) and improve nutrient digestibilities. Supplementation of effective feed additives can reduce excretion of nitrogen and phosphorus due to efficient feed utilization. These include enzymes (e.g., phytase), antibiotics, probiotics, organic acids and growth hormones ($\beta$-agonists and porcine somatotropin). One of the most effective ways to reduce pollutants from swine manure is to use synthetic amino acids in feed manufacturing. Many studies showed that reduction of 2 to 4% unit (U) of dietary protein with supplemental amino acid (AA) could dramatically reduce (15 to 20%) nitrogen excretion. Regarding feeding strategies, it has been recognized that phase feeding regimen could be used to reduce nitrogen and phosphorous excretion by feeding pigs in better agreement with age and physiological state. Feeding barrows and gilts separately, known as split sex feeding, can also decrease excretion of nitrogen and phosphorus. With the increasing concerns on the negative impact of animal production systems on the environment, animal nutritionists and producers should be aware that sustainability of animal agriculture is as important as high production performance. Therefore, some feeding and management strategies described in this manuscript will help to reduce environmental pollution in swine production. Proper combination of feeding regimen and environment-friendly diet formulation through nutritional approach will be more effective to reduce nutrient excretion in swine production system compared to single approach to do so.

스탠스 폭에 따른 신체 좌우 이동의 교육단서 제공을 위한 운동역학적 분석 (Kinetic Analysis for Providing Education Cues on Left and Right Maneuvers of Body by Stance Width)

  • 이동진
    • 한국콘텐츠학회논문지
    • /
    • 제15권8호
    • /
    • pp.556-563
    • /
    • 2015
  • 본 연구의 목적은 스탠스 폭에 따른 신체의 좌우방향 이동에 대한 동작을 비교, 분석하는데 있다. 이를 위해 남자 대학생 7명(평균 신장 $174.9{\pm}4.8cm$, 평균 체중 $70.9{\pm}6.6kg$)이 실험에 참여하였다. 실험을 위해 고속카메라 9대와 지면반력기 2대가 이용되었으며, 두 가지의 스탠스 폭은 좁은 보폭(평균 42.9cm)과 넓은 보폭(평균 65cm)으로 제한하여 실시하였다. 실험을 통해 다음과 같은 결론을 얻었다. 첫째, 좁은 보폭이 양발이 착지 후 오른발이 이지하는 순간까지, 즉 추진 구간의 소요시간에서 유의하게 짧은 시간이 소요되었다. 둘째, 스플릿 스텝 후 오른발 이동 변위는 좁은 보폭이 유의하게 길게 나타났다. 셋째, 신체무게중심 속도는 오른 발 이지 시와 최대 속도에서 두 보폭 간에 유의한 차이가 나타나지 않았다. 넷째, 오른발 이지시 엉덩관절과 무릎관절의 각도는 좁은 보폭의 각도가 유의하게 더 크게 나타났다. 다섯째, 오른발 이지시 지면반력 값은 두 보폭 간에 유의한 차이가 나타나지 않았다.

근관충전용 글라스 아이오노머 시멘트의 근단 폐쇄성과 치질 적합성에 관한 연구 (EVALUATION OF APICAL MICROLEAKAGE AND ADAPTATION TO THE DENTINAL WALL OF THE GLASS-IONOMER ROOT CANAL CEMENT)

  • 김현아;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.596-608
    • /
    • 1997
  • The purpose of this study was to compare the apical leakage and adaptation to the dentinal wall of a glass ionomer root canal cement(Ketac-Endo) with those of AH-26 and Tubli-Seal. 102 single-rooted teeth were insrumented with step-back technique and randomly divided into four groups according to kinds of root canal cements: Ketac-Endo, AH-26, Tubli-Seal, and no root canal cement. Four experimental groups were as follows; Group 1 : Filling with gutta-percha and Ketac-Endo Group 2 : Filling with gutta-percha and AH-26 Group 3 : Filling with gutta-percha and Tubli-Seal Group 4 : Filling with gutta-percha without root canal cement All the specimens were obturated with lateral condensation technique, and stored in 100% humidity for 4 days. 20 teeth in each group were placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. And they were evaluated for linear dye leakage using a stereoscope and analyzed by one-way ANOVA. 22 teeth were split longitudinally and evaluated the adaptation to the dentinal wall using scanning electron microscope(4 teeth in each group) and stereoscope(2 teeth in 1, 2, 3 group). The obtained results were as follows ; 1. In case of not used root canal cement(Group 4), there was showed much degree of dye penetration comparerd with used root canal cements (Group 1, 2, 3)(P<0.01). 2. In the case of used root canal cements(Group 1, 2, 3), there was no significant difference in linear leakage in groups(P>0.01). 3. In the case of used root canal cements(Group 1, 2, 3), there was showed intimate adaptation to the dentinal wall independent on kinds of root canal cements. 4. Fractured surfaces indicated failure of cohesion in Ketac-Endo, and failure of adhesion to dentine in AH-26 and Tubli-Seal. 5. According to similar apical leakage and adaptability to the dentinal wall to another root canal cements, it is possible to be used glass-ionomer cement as root canal cement.

  • PDF

광학 영상과 Lidar의 정보 융합에 의한 신뢰성 있는 구조물 검출 (Information Fusion of Photogrammetric Imagery and Lidar for Reliable Building Extraction)

  • 이동혁;이경무;이상욱
    • 방송공학회논문지
    • /
    • 제13권2호
    • /
    • pp.236-244
    • /
    • 2008
  • 본 논문에서는 칼라 세그멘테이션, 에지 정합, 지각적 그룹핑 등을 사용하여 Lidar 데이터와 광학 영상의 정보 융합에 의한 새로운 구조물 검출 및 복원 알고리듬을 제안한다. 제안하는 알고리듬은 두 가지 단계로 구성된다. 첫 번째로, 항공 Lidar 데이터로부터 초기 구조물 추출 결과와 영상의 칼라 세그멘테이션 결과를 사용하여 coarse building boundary를 추출한다. 두 번째로, coarse building boundary와 에지 정합 및 지각적 그룹핑에 의해 보다 정밀한 구조물 추출 결과인 precise building boundary를 추출한다. 본 논문에서 제안하는 알고리듬은 보다 신뢰성 있는 구조물 검출을 위해, 광학 영상으로부터 칼라 정보를 사용한다. 이를 통해, Lidar에 의해 획득된 붕괴된 형태의 구조물 외곽선을 보완한다. 또한, 인공지물의 특징으로서, 에지의 직선성 및 다면체 형태의 지붕모양을 반영함으로써 신뢰성 있는 구조물을 검출한다. 다중 센서 데이터에 대한 실험은 제안하는 알고리듬이 Lidar 단일 센서 결과에 비해 정밀하고 신뢰성 있는 결과를 보여준다.

미얀마 만달레이시의 단순화된 교통망을 이용한 전통적인 4단계 교통 모델에 관한 연구 (Exercising The Traditional Four-Step Transportation Model Using Simplified Transport Network of Mandalay City in Myanmar)

  • 웃위린;윤병조;이선민
    • 한국재난정보학회 논문집
    • /
    • 제20권2호
    • /
    • pp.257-269
    • /
    • 2024
  • Purpose: The purpose of this study is to explain the pivotal role of the travel forecasting process in urban transportation planning. This study emphasizes the use of travel forecasting models to anticipate future traffic. Method: This study examines the methodology used in urban travel demand modeling within transportation planning, specifically focusing on the Urban Transportation Modeling System (UTMS). UTMS is designed to predict various aspects of urban transportation, including quantities, temporal patterns, origin-destination pairs, modal preferences, and optimal routes in metropolitan areas. By analyzing UTMS and its operational framework, this research aims to enhance an understanding of contemporary urban travel demand modeling practices and their implications for transportation planning and urban mobility management. Result: The result of this study provides a nuanced understanding of travel dynamics, emphasizing the influence of variables such as average income, household size, and vehicle ownership on travel patterns. Furthermore, the attraction model highlights specific areas of significance, elucidating the role of retail locations, non-retail areas, and other locales in shaping the observed dynamics of transportation. Conclusion: The study methodically addressed urban travel dynamics in a four-ward area, employing a comprehensive modeling approach involving trip generation, attraction, distribution, modal split, and assignment. The findings, such as the prevalence of motorbikes as the primary mode of transportation and the impact of adjusted traffic patterns on reduced travel times, offer valuable insights for urban planners and policymakers in optimizing transportation networks. These insights can inform strategic decisions to enhance efficiency and sustainability in urban mobility planning.

Bacillus subtilis ATP 조해(阻害) Ribonuclease에 관한 연구 (ATP-Inhibited Ribonuclease of Bacillus subtilis)

  • 이택수
    • Applied Biological Chemistry
    • /
    • 제18권3호
    • /
    • pp.167-176
    • /
    • 1975
  • ATP-저해 ribonuclease는 Bacillus subtilis와 같은 Bacillus속에서만 발견 되는 것으로서 이들 효소의 생리적 역활을 규명할 목적으로 Bacillus subtilis 균주를 사용하여 ATP저해성 negative ribonuclease변이주의 취득을 시도하고 선정된 균주가 생산하는 ribonuclease의 정제 및 몇 가지 성질에 대하여 실험한 결과는 아래와 같다. 1. Bacillus subtilis로 부터 ATP-저해 ribonuclease negative mutant의 취득을 시도한 결과 시험된 1817주의 균중에서 101균주가 변이주주로 선정 되었다. 2. 수개의 개별적인 column chromatography에 의하여 당균주가 생산하는 ATP-저해성 ribonuclease의 정제를 시도한 결과 DEAE-Sephadex A-50 column chromatography을 이용한 경우는 30배의 정제 효과와 99%의 회수율을 나타냈고 Sephadex G-75 column의 경우는 20배의 정제 효과와 98%의 회수율을 각각 나타냈다. 3. pH 5침전, 유안염석, Sephadex G-75 및 CM Sephadex를 연속적으로 통과시켜 당효소에 대한대량정제 시험을 시도한 결과 최초의 step(crude extract) 과정에 비하여 60배의 정제효과를 나타냈다. 4. 본정제 효소액에 대하여 전기영동을 실시한 결과 비정제 효소액에 비하여 매우 감소된 수의 담백 pattern을 나타냈다. 5. 당균주가 생산하는 ATP저헤 ribonuclease는 single stranded RNA를 분해하여 2',3'-cyclic AMP, 2',3'-cyclic CMP, 2',3'-cyclic GMP, 2',3'-cyclic UMP와 몇종의 미지물을 생성하였고 또한 본효소는 double stranded RNA를 분해하지 않었다.

  • PDF