• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.49-54
• /
• 2009

Despite the steady effort of kitchen furniture industry, consumers' complains never seem to decrease. The common storage problem of the houses of different sizes(20 pyeong, 30 pyeong, and 40 pyeong) was the dificiency of storage area and inadequate shelf division. It implies that such dificiency in kitchens is not because of the size of storage area, but because of such a great diversity of kitchenware and lack of studies on these items. The purpose of this research is to provide the checklist of the variety and quantity of stored kitchenware in researched area and easily adopt it to the kitchen furniture design. Studied household in average hold 239 types and about 890 items. The size of residence did not effect the number much. The first step of making the checklist is to categorize items into 9 biggest categories considering the usage of items and in which step of the preparing food the item was used. Second step is to categorize the items into 31 smaller categories reflecting the shape of items, the storage style and the place of storage. Third step is to sort the items into smallest categories by the frequency of use, storage type, and additional capacity of an item. Even when items are sorted into the same higher level of categories, the frequency of use caused storage area to differ. Also, storage style of an item differed according to the storage area. Based on these factors, we listed items in detail and made the checklist.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.343-355
• /
• 2018

A wide-voltage-conversion range bidirectional DC-DC converter is proposed in this paper. The topology is comprised of one typical LC energy storage component and a special common grounded asymmetric H-bridge with four active power switches/anti-parallel diodes. The narrow output PWM voltage is generated from the voltage difference between two normal (wider) output PWM voltages from the asymmetric H-bridge with duty cycles close to 0.5. The equivalent switching frequency of the output PWM voltage is double the actual switching frequency, and a wide step-down/step-up ratio range is achieved. A 300W prototype has been constructed to validate the feasibility and effectiveness of the proposed bidirectional converter between the variable low voltage side (24V~48V) and the constant high voltage side (200V). The slave active power switches allow ZVS turn-on and turn-off without requiring any extra hardware. The maximum conversion efficiency is 94.7% in the step-down mode and 93.5% in the step-up mode. Therefore, the proposed bidirectional topology with a common ground is suitable for energy storage systems such as renewable power generation systems and electric vehicles with a hybrid energy source.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.197-200
• /
• 2002

In this paper, roll damping coefficients for a non-conventional cross section, which is herein named as 'step' model, are investigated numerically and experimentally. Experiments are extensively carried out to estimate the roll damping coefficients. Numerical estimations are also made with the help of numerical codes. For convenience, the roll damping is divided into wave-making component and viscous component. The wave-making component is determined using a potential code and the viscous component using a viscous flow code, in which the fluid domain is taken as unbounded. In order to validate the present approach, a typical cross section with bilge is considered and our results are compared with published data. The comparison shows a good agreement qualitatively. For the step model, numerical results are compared well with experimental data besides some quantitative discrepancies at a certain range of frequency. It is thought that the discrepancy might be caused by the ignorance of the free surface in viscous computations. It is found in the case of the step model that not only the viscous component but also the wave component increases considerably compared to the section with bilge.

• ETRI Journal
• /
• 제33권2호
• /
• pp.201-209
• /
• 2011

This paper presents a wide-band fine-resolution digitally controlled oscillator (DCO) with an active inductor using an automatic three-step coarse and gain tuning loop. To control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. To cover the wide tuning range, a three-step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO tuning range is 58% at 2.4 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The phase noise of the DCO output at 2.4 GHz is -120.67 dBc/Hz at 1 MHz offset.

• 한국국방경영분석학회지
• /
• 제31권1호
• /
• pp.58-72
• /
• 2005

RFID(Radio Frequency Identification) is one of key technologies in ubiquitous computing. RFID system comprises tag, reader, and computer application. The tag is a small electronic chip, which is attached to a thing such as item, pallet, container. The reader has an tiny antenna obtaining the identification information of the things by radio frequency, and provides the information to the computer application for a business. In this paper we have proposed the military application of RFID and its implementation policy for the Korean armed forces. We believe that The principle application area would be logistics TAV(total asset visibility) and resource management, and the implementation should be achieved step by step considering the advancement of RFID technology and government policy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.756-760
• /
• 1997

In this research, the automatic level measurement system used in land leveling was developed. By using a laser transmitter and a receiver as measuring equipments, level was measured automatically. The driving part of this system was composed of stepping motor, timing belt and pulley. It drived the laser receiver to track laser beam generated form the laser transmitter. The level measuring experiments were performed about three level change shapes (step, random, sine). This system could measure step level change of which amplitude was 40mm in 0.5s, random level change within .+-. mm, maximum measurement error. In case of sine level change, experiment was executed with varying the spatial frequency of level change. As a result, this system was able to measure sine level change of which spatial frequency was 0.5m $^{-1}$ accurately.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.419-421
• /
• 1994

A linear actuator using Terfenol-D rod which can accumulate displacement of the rod was fabricated. The diameter of used rod is 12[mm] and the length of it is 75[mm]. It adopts the electromagnetic units as the clamping units. Basic characteristics of the linear actuator such as displacement vs. current, velocity vs. frequency, step size vs. frequency were experimented. When the driving current is 1[A] and 100[Hz], the velocity of the actuator is about 3.5[mm/s]. We discussed the cause of step size's decrease as increasing driving frequency and the solution to the problem.

• 한국음향학회지
• /
• 제22권4호
• /
• pp.315-322
• /
• 2003

본 논문에서는 주파수 영역의 일부가 상대적으로 심하게 손상된 음성에 대한 음성 인식기의 성능을 향상시키기 위해 채널집중 멜 켑스트럼 특징추출법을 제안한다. 이 방법은 기존멜 켑스트럼 특징추출의 필터뱅크분석 단계에서 각 채널의 신뢰도를 구하고, 신뢰도가 높은 주파수 영역이 음성인식에 보다 중요하게 사용되도록 멜 켑스트럼 추출 및 HMM의 출력확률 계산식에 채널 가중을 도입한다. TIDIGITS 데이터베이스에 음성의 일부 주파수를 손상시키는 다양한 주파수 선택 잡음을 가산하여 인식 실험을 수행한 결과, 제안한 방법은 덜 손상된 주파수영역의 음성 정보를 효과적으로 활용하며, 주파수선택 잡음에 대해 우수하다고 알려진 다중대역 음성인식에 비해 평균 11.2%더 높은 성능을 얻었다.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.166-176
• /
• 2000

본 논문에서는 이동위성 통신시스댐의 신호열화는 주로 페이딩 및 도플러 천이에 기인하므로 이로 인한 신호 의 열화 해석 및 이의 보상 기법이 중요하다 저궤도위성통선시스댐에서 도플러효과에 의한 수선선호의 주파수 지연이 크고 시간적인 변동에 있어서 그의 복조가 대단히 곤란하다. 따라서 본 논문에서는 적용 칼만 펼터를 이용한 2단의 자동 주파수 제어(AFC)를 제안한다. 2단의(coarse와 fine) 추정에 의해 주파수 추적범위를 심볼율을 초월한 경우까지 확장하는 것이 가능하다. 더욱이 이의 칼만 필 터 AFC는 주파수 지연의 시간변화와 추정에도 유효하다. 그 결과 제안된 보상기는 수 KHz 이상의 도플러 천이 를 보상할 수 있다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권2호
• /
• pp.35-41
• /
• 1995

본 논문은 대전원 탈락 사고시 계통의 지나친 주파수하락을 방지하기 위하여 주파수하락의 초기변화율을 근거로 하여 적정부하를 차단할 수 있도록 저주파수계전기의 합리적인 정정방법을 제시한다. 본 연구에서의 부하차단 전략은, 주파수가 59.5[Hz]에 이를 때 부하차단 제1단을 일으키고 제1,2단에의 크기가 주파수하락의 초기변화율을 근거하여 주어진 계통외란의 크기인 총 정태부하 차단량의 1/2이되도록 정정하였다. 그 결과 새로 제안한 방법이 주파수 회복특성에 있어서 종래의 방법보다 더 효과적임을 알 수 있다.