• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.49-54
• /
• 2009

Despite the steady effort of kitchen furniture industry, consumers' complains never seem to decrease. The common storage problem of the houses of different sizes(20 pyeong, 30 pyeong, and 40 pyeong) was the dificiency of storage area and inadequate shelf division. It implies that such dificiency in kitchens is not because of the size of storage area, but because of such a great diversity of kitchenware and lack of studies on these items. The purpose of this research is to provide the checklist of the variety and quantity of stored kitchenware in researched area and easily adopt it to the kitchen furniture design. Studied household in average hold 239 types and about 890 items. The size of residence did not effect the number much. The first step of making the checklist is to categorize items into 9 biggest categories considering the usage of items and in which step of the preparing food the item was used. Second step is to categorize the items into 31 smaller categories reflecting the shape of items, the storage style and the place of storage. Third step is to sort the items into smallest categories by the frequency of use, storage type, and additional capacity of an item. Even when items are sorted into the same higher level of categories, the frequency of use caused storage area to differ. Also, storage style of an item differed according to the storage area. Based on these factors, we listed items in detail and made the checklist.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.343-355
• /
• 2018

A wide-voltage-conversion range bidirectional DC-DC converter is proposed in this paper. The topology is comprised of one typical LC energy storage component and a special common grounded asymmetric H-bridge with four active power switches/anti-parallel diodes. The narrow output PWM voltage is generated from the voltage difference between two normal (wider) output PWM voltages from the asymmetric H-bridge with duty cycles close to 0.5. The equivalent switching frequency of the output PWM voltage is double the actual switching frequency, and a wide step-down/step-up ratio range is achieved. A 300W prototype has been constructed to validate the feasibility and effectiveness of the proposed bidirectional converter between the variable low voltage side (24V~48V) and the constant high voltage side (200V). The slave active power switches allow ZVS turn-on and turn-off without requiring any extra hardware. The maximum conversion efficiency is 94.7% in the step-down mode and 93.5% in the step-up mode. Therefore, the proposed bidirectional topology with a common ground is suitable for energy storage systems such as renewable power generation systems and electric vehicles with a hybrid energy source.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.197-200
• /
• 2002

In this paper, roll damping coefficients for a non-conventional cross section, which is herein named as 'step' model, are investigated numerically and experimentally. Experiments are extensively carried out to estimate the roll damping coefficients. Numerical estimations are also made with the help of numerical codes. For convenience, the roll damping is divided into wave-making component and viscous component. The wave-making component is determined using a potential code and the viscous component using a viscous flow code, in which the fluid domain is taken as unbounded. In order to validate the present approach, a typical cross section with bilge is considered and our results are compared with published data. The comparison shows a good agreement qualitatively. For the step model, numerical results are compared well with experimental data besides some quantitative discrepancies at a certain range of frequency. It is thought that the discrepancy might be caused by the ignorance of the free surface in viscous computations. It is found in the case of the step model that not only the viscous component but also the wave component increases considerably compared to the section with bilge.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.201-209
• /
• 2011

This paper presents a wide-band fine-resolution digitally controlled oscillator (DCO) with an active inductor using an automatic three-step coarse and gain tuning loop. To control the frequency of the DCO, the transconductance of the active inductor is tuned digitally. To cover the wide tuning range, a three-step coarse tuning scheme is used. In addition, the DCO gain needs to be calibrated digitally to compensate for gain variations. The DCO tuning range is 58% at 2.4 GHz, and the power consumption is 6.6 mW from a 1.2 V supply voltage. An effective frequency resolution is 0.14 kHz. The phase noise of the DCO output at 2.4 GHz is -120.67 dBc/Hz at 1 MHz offset.

• Journal of the military operations research society of Korea
• /
• v.31 no.1
• /
• pp.58-72
• /
• 2005

RFID(Radio Frequency Identification) is one of key technologies in ubiquitous computing. RFID system comprises tag, reader, and computer application. The tag is a small electronic chip, which is attached to a thing such as item, pallet, container. The reader has an tiny antenna obtaining the identification information of the things by radio frequency, and provides the information to the computer application for a business. In this paper we have proposed the military application of RFID and its implementation policy for the Korean armed forces. We believe that The principle application area would be logistics TAV(total asset visibility) and resource management, and the implementation should be achieved step by step considering the advancement of RFID technology and government policy.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.756-760
• /
• 1997

In this research, the automatic level measurement system used in land leveling was developed. By using a laser transmitter and a receiver as measuring equipments, level was measured automatically. The driving part of this system was composed of stepping motor, timing belt and pulley. It drived the laser receiver to track laser beam generated form the laser transmitter. The level measuring experiments were performed about three level change shapes (step, random, sine). This system could measure step level change of which amplitude was 40mm in 0.5s, random level change within .+-. mm, maximum measurement error. In case of sine level change, experiment was executed with varying the spatial frequency of level change. As a result, this system was able to measure sine level change of which spatial frequency was 0.5m $^{-1}$ accurately.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.419-421
• /
• 1994

A linear actuator using Terfenol-D rod which can accumulate displacement of the rod was fabricated. The diameter of used rod is 12[mm] and the length of it is 75[mm]. It adopts the electromagnetic units as the clamping units. Basic characteristics of the linear actuator such as displacement vs. current, velocity vs. frequency, step size vs. frequency were experimented. When the driving current is 1[A] and 100[Hz], the velocity of the actuator is about 3.5[mm/s]. We discussed the cause of step size's decrease as increasing driving frequency and the solution to the problem.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.315-322
• /
• 2003

We propose a channel-attentive Mel frequency cepstral coefficient (CAMFCC) extraction method to improve the recognition performance of speech that is partially corrupted in the frequency domain. This method introduces weighting terms both at the filter bank analysis step and at the output probability calculation of decoding step. The weights are obtained for each frequency channel of filter bank such that the more reliable channel is emphasized by a higher weight value. Experimental results on TIDIGITS database corrupted by various frequency-selective noises indicated that the proposed CAMFCC method utilizes the uncorrupted speech information well, improving the recognition performance by 11.2% on average in comparison to a multi-band speech recognition system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.166-176
• /
• 2000

In this paper, the LEO system signal degradation is mainly due to fading and doppler shift, so that the analysis of the signal degradation and compensation techniques are very important. This paper propose a Kalman filter based two step Automatic Frequency Control(AFC) to combat large and time variant frequency offset in low earth orbit satellite communication systems. The proposed Kalman AFC method estimates a frequency offset in two steps, I. e., coarse and fine estimations, extending the frequency acquisition range to even for than the symbol rate. Furthermore, it can track well a time variation of frequency offset. It is shown that the proposed compensator is able to compensate for doppler shift more than several KHz.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.35-41
• /
• 1995

This paper proposes an adaptive methodology for setting of the underfrequency relays that is based on the initial rate of change of the frequency decline to protect for excess frequency decline of power system under large generator outage. The strategy of the load shedding is as follows : Let the load shedding of the first step occur when the frequency reaches 59.5 (Hz), and the load shedding power of this first and second step be one half of the total "Static Load Shed" value for any given disturbance size based on the initial rate of change of the frequency. As a results, it is verified that the use of the proposed method is more efficient than the conventional method in the characteristic of the frequency recovery. recovery.