• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.979-980
• /
• 2007

This paper deals with the analysis error in the time step FEM which is applied to analyze the electric machinery. In order to calculate the error accurately, a simple inductor structure which has analytical solution is designed, and then the time step analysis for the equivalent circuit and time step FEM is performed respectively. Finally, according to the analysis methods. the results are compared and discussed.

• 한국전문물리치료학회지
• /
• 제19권4호
• /
• pp.16-23
• /
• 2012

This study examined the effects of custom-made foot orthotics on the temporal-spatial gait parameters in children with cerebral palsy. Twenty spastic bilateral cerebral palsy (spastic CP) children (11 boys and 9 girls) participated in this study. GAITRite was used to examine the velocity, cadence, step length differential, step length, stride length, stance time, single support time, double support time, base of support, and toe angle while walking with and without foot orthotics. The differences in temporal-spatial parameters were analyzed using paired t-test. The significance level was set at .05. The velocity, cadence, both step lengths, both stride lengths, both bases of support and right toe angle significantly increased when the children with spastic CP with foot orthotics compared to without foot orthotics (p<.05). The step length differential between the two extremities, left stance time and left single support time, significantly decreased with foot orthotics (p<.05). Right stance time, right single support time, both double support times and left toe angle showed little change (p>.05). This study demonstrated that foot orthotics were beneficial for children with spastic CP as a gait assistance tool.

• 한국시뮬레이션학회논문지
• /
• 제13권2호
• /
• pp.13-21
• /
• 2004

The thermal-hydraulic model ARTS which was based on the RETRAN-3D code adopted in the domestic full-scope power plant simulator which was provided in 1998 by KEPRI. Since ARTS is a generalized code to model the components with control volumes, the smaller time-step size should be used even if converged solution could not get in a single volume. Therefore, dedicated models which do not force to reduce the time-step size are sometimes more suitable in terms of a real-time calculation and robustness. In the case of PRT(Pressurizer Relief Tank) model, it is consist of subcooled water in bottom and non-condensable gas in top. The sparger merged under subcooled water enhances condensation. The complicated thermal-hydraulic phenomena such as condensation, phase separation with existence of non-condensable gas makes difficult to simulate. Therefore, the PRT volume can limit the time-step size if we model it with a general control volume. To prevent the time-step size reduction due to convergence failure for simulating this component, we developed a dedicated model for PRT. The dedicated model was expected to provide substantially more accurate predictions in the analysis of the system transients. The results were resonable in terms of accuracy, real-time simulation, robustness and education of operators, complying with the ANSI/ANS-3.5-1998 simulator software performance criteria and RETRAN-3D results.

• 한국음향학회지
• /
• 제35권1호
• /
• pp.55-62
• /
• 2016

LMF(Least Mean Fourth) 알고리즘은 특히 비정규 잡음 상황에서 빠른 수렴성을 나타낼 뿐만 아니라 추정 오차도 낮은 것으로 잘 알려져 있다. 최근 LMS(Least Mean Square) 알고리즘 분야에서는 가변 스텝 크기를 적용한 알고리즘들에 대한 관심이 증대되어 왔다. 그 이유는 가변 스텝 크기 LMS가 다양한 환경에서 고정 스텝 크기 LMS보다 우수한 결과를 내기 때문이다. 본 논문에선 LMF에 대한 가변 스텝 크기의 한 방법으로 대수학적 스텝 크기를 사용하는 가변 스텝 크기 LMF 알고리즘을 제안한다. 제안된 방법은 가변 스텝 크기 LMS와 마찬가지로 고정 스텝 크기 LMF보다 우수할 것이 예상된다. 본 논문은 그 우수성을 시불변 채널과 시변 채널 각각의 채널 환경하에서 시뮬레이션을 통하여 보인다.

• 한국컴퓨터정보학회논문지
• /
• 제28권2호
• /
• pp.201-207
• /
• 2023

본 논문에서는 Multi-Step Time Series의 세 가지 전략을 비교 분석하기 위해 LGBM, MLP, LSTM, GRU를 사용하여 농산물 중장기 가격 예측에 대한 최적의 모형을 제안한다. 제안 모형은 다각도로 전략을 선택하여 모델과 전략간 최적의 조합을 찾도록 설계되었다. 기존 농산물 가격 예측 연구에서는 전통 계량경제 모델인 ARIMA를 비롯하여 LSTM 계열 모델이 주로 사용된 반면 Multi-Step Time Series 관련 농산물 가격 예측 연구는 매우 제한적이다. 본 연구에서는 농산물 가격의 변동성 정도에 따라 두 개의 기간으로 나누어 실험을 진행하였으며, Direct, Hybrid, Multiple Outputs 등 세 전략의 중장기 가격 예측 결과 Hybrid 접근법이 상대적으로 우수한 성능을 보였다.본 연구 결과는 중장기 일별 가격 예측을 고도화할 수 있는 효과적인 대안을 제시한다는 측면에서 학술적, 실무적 의의를 갖는다.

• 대한치과의료관리학회지
• /
• 제10권1호
• /
• pp.1-8
• /
• 2022

This study introduces research on the quality of medical services, optimization of medical services, dental medical services, implant medical services, and time schedules, as well as the effective process of dental implant medical services, which is expensive and requires a long treatment period. For improvement, it is suggested to evaluate using a time schedule. In this method, a time schedule is prepared in which each step, starting from the patients appointment until the completion of the treatment process, is allotted a certain time. This schedule was finalized in consultation with the employees. When performing all implant operations, the starting time of each item was checked to evaluate the degree of compliance and to understand any reasons for delay in each step. After identifying the causes for delay at each step, suitable steps to rectify the drawbacks were developed, and an optimal plan for patient management was determined. Changes in waiting time and human resource utilization were shown as concrete data, suggesting that such a schedule is meaningful as a decision-making support tool.

• International Journal of Control, Automation, and Systems
• /
• 제4권2호
• /
• pp.165-171
• /
• 2006

This paper proposes a data fusion algorithm of nonlinear multi sensor dynamic systems of synchronous sampling based on filtering step by step. Firstly, the object state variable at the next time index can be predicted by the previous global information with the systems, then the predicted estimation can be updated in turn by use of the extended Kalman filter when all of the observations aiming at the target state variable arrive. Finally a fusion estimation of the object state variable is obtained based on the system global information. Synchronously, we formulate the new algorithm and compare its performances with those of the traditional nonlinear centralized and distributed data fusion algorithms by the indexes that include the computational complexity, data communicational burden, time delay and estimation accuracy, etc.. These compared results indicate that the performance from the new algorithm is superior to the performances from the two traditional nonlinear data fusion algorithms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.265-268
• /
• 2004

In this paper. we propose an adaptive step-size algorithm for the adaptive interference canceller (AIC) in the space-time trellis coded DS-CDMA system. In the AIC, the performance of the blind LMS algorithms that updates the tap-weight vector of the AIC is heavily dependent on the choice of step-size. To improve the performance of the fixed step-size AIC (FS-AIC), the regular adaptive step-size algorithm is extended in complex domain and applied to the joint AIC and ML decoder scheme. Simulation results show that the joint adaptive step-size AIC (AS-AIC) and ML decoder scheme using the proposed algorithm has boner performance than not only the conventional ML decoder but also the joint FS-AIC and ML decoder scheme without much increase of the decoding delay and complexity.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.563-570
• /
• 2003

When a fault occurs on railway feeders it is very important to detect the fault to protect trains and facilities. Because a DC railway system has low feeder voltage, The fault current can be smaller than the current of load starting. So it is important to discriminate between the small fault current and the load starting current. The load starting current increases step by step but the fault current increases at one time. So the type of $\Delta$I/ relay(50F) was developed using the different characteristics between the load starting current and the fault current. The load starting current increases step by step so the time constant of each step is much smaller than that of the fault current. First, to detect faults in DC railway systems, an algorithm using the time constant calculated by the method of least squares is presented in this paper. If a fault occurs on DC railway systems it is necessary to find a fault location to repair the faulted system as soon as possible. The second aim of the paper is to calculate the accurate fault location using Kirchhoff's voltage law.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.88-95
• /
• 2000

The level of noise produced by machinery and its arrangement insides a factory is indicated to be a maximum of 96.1 dB(A). The maximum level of noise from a commoner's house outside the factory is shown to be 62.9 dB(A), which exceeds 60 dB(A), the permitted limit of noise level in a time period of day. us study has predicted the level of noise reduction according to a step by step prevention plan by considering the characteristics of the causes of noise, the permitted limit of noise levels, problems and economical efficiency attendant upon the noise prevention measures. Establishing target levels of noise each of the three steps of the noise prevention plan. The predicted level of noise at the place of a commoner's house in accordance with the first step is 50.0 - 59.0 dB(A), and can satisfy the permitted limit of noise in a time period of the day. In taking prevention measures for the second step, the noise level is 50.7 - 53.6 dB(A) which is less than 55 dB(A) in a time period of the evening, the permitted limit of noise in a time period of night., and it can meet 47.4 - 50.3 dB(A) in the third step.