• Journal of applied mathematics & informatics
• /
• 제32권1_2호
• /
• pp.185-201
• /
• 2014

In this paper, we construct a numerical method to solve singularly perturbed one-dimensional parabolic convection-diffusion problems. We use Euler method with uniform step size for temporal discretization and exponential-spline scheme on spatial uniform mesh of Shishkin type for full discretization. We show that the resulting method is uniformly convergent with respect to diffusion parameter. An extensive amount of analysis has been carried out to prove the uniform convergence with respect to the singular perturbation parameter. The obtained numerical results show that the method is efficient, stable and reliable for solving convection-diffusion problem accurately even involving diffusion parameter.

• 전자공학회논문지S
• /
• 제35S권2호
• /
• pp.146-156
• /
• 1998

Thispapr proposes hybrid navigation parameter estimation using sequential aerial images. The proposed navigation parameter estimation system is composed of two parts: relative position estimation and absolute position estimation. the relative position estimation recursively computes the current velocity and absolute position estimation. The relative position estimation recursively computes the current velocity and position of an aircraft by accumulating navigation parameters extracted from two succesive aerial images. Simple accumulation of parameter values decreases reliability of the extracted parameters as an aircraft goes on navigating. therefore absolute position estimation is required to compensate for position error generated in the relative position step. The absolute position estimation algorithm combining image matching and digital elevation model(DEM) matching is presented. Computer simulation with real aerial image sequences shows the efficiency of the proposed hybrial algorithm.

• Journal of Astronomy and Space Sciences
• /
• 제21권3호
• /
• pp.209-220
• /
• 2004

Some methods have been presented to get optimal formation trajectories in the step of configuration or reconfiguration, which subject to constraints of collision avoidance and final configuration. In this study, a method for optimal formation trajectory-planning is introduced in view of fuel/time minimization using parameter optimization technique which has not been applied to optimal trajectory-planning for satellite formation flying. New constraints of nonlinear equality are derived for final configuration and constraints of nonlinear inequality are used for collision avoidance. The final configuration constraints are that three or more satellites should be placed in an equilateral polygon of the circular horizontal plane orbit. Several examples are given to get optimal trajectories based on the parameter optimization problem which subjects to constraints of collision avoidance and final configuration. They show that the introduced method for trajectory-planning is well suited to trajectory design problems of formation flying missions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1037-1041
• /
• 1996

Input-output linearization technique in nonlinear control does not guarantee the robustness in the presence of parameter uncertainty or unmodeled dynamics, etc. However, it has been used as an important preliminary step in achieving additional control objectives, for instance, robustness to parameter uncertainty and disturbance attenuation. An indirect adaptive control scheme based on input-output linearization is proposed in this paper. The scheme consists of a Hopfield network for process parameter identification and an adaptive sliding mode controller based on input-output linearization, which steers the system response into a desired configuration. A numerical example is presented for the trajectory tracking of uncertain nonlinear dynamic systems with slowly time-varying parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.134-136
• /
• 2001

In this paper, using equivalent circuit of BLDC motor in the 30W class, process of modeling the BLDC motor and calculating the parameter is shown. Through run-down-test and measuring back EMF, torque, speed and ampere, parameter that transfer function requires was gotten. In this result, for step response of BLDC motor, comparing the actual result obtained by circuit experiment with the simulation result obtained by substituting this parameter into the transfer function, it was established that process calculating parameters in this study is proper.

• 지구물리와물리탐사
• /
• 제10권1호
• /
• pp.60-68
• /
• 2007

광대역 유도 분극 (spectral induced polarization, SIP) 탐사는 일정 주파수 영역에서 임피던스 자료를 측정하고, 이 자료로부터 광대역 주파수 특성을 추정하기 위한 주파수 분석으로 이루어진다. 지하매질에 대한 광대역 주파수 특성을 정확하고 정량적으로 추정하기 위해서는 기존의 방법보다 정교하고 안정적인 역산 알고리듬이 필요하다. 이를 위해 이 연구에서는 SIP 변수의 공간적인 분포를 계산하기 위하여 두 단계로 이루어진 역산 알고리듬을 개발하였다. 첫 번째 단계에서 각각의 주파수 자료에 대한 복소 전기비저항들 사이에 제한조건을 가하여 모든 SIP 탐사자료를 한꺼번에 역산한다. 새로운 제약조건은 각각의 주파수 자료들로부터 역산된 복소 전기비저항들이 모두 유사한 특성을 보일 것이라는 가정을 통해 역산 과정에서의 잡음 특성을 향상시킬 수 있는 특정을 가진다. 수치 실험을 통하여 이 연구에서 채택한 상호 제한 조건은 역산 과정상의 인위적인 잡음을 성공적으로 제거하고 있음을 확인하였다. 두 번째 단계로서 이전 단계에서 얻어진 각각의 주파수에 대한 복소 전기비저항 자료로부터 SIP 변수의 공간적인 분포를 계산하기 위하여, Cole-Cole 모델을 이용하여 SIP 변수들을 역산을 통해 계산하게 된다. 수치 실험을 통하여 역산된 SIP 변수의 영상이 실제 모델과 잘 일치하고 있음을 확인하였다. 개발된 SIP 해석기법은 일반적인 전기비저항 탐사보다 유용한 지하 영상을 제공할 수 있을 것으로 기대된다.

• Mass Spectrometry Letters
• /
• 제6권1호
• /
• pp.21-25
• /
• 2015

In this paper, I describe the importance of matrix spraying conditions in imaging mass spectrometry (IMS) to obtain successful imaging results. My developed matrix application methodology, which is a "two-step matrix application" sequentially combined with matrix sublimation and spraying matrix solution can provide high reproducibility and high ion yield compared with a conventional direct spraying method. However, insufficient IMS results were obtained occasionally despite the two-step method. Therefore, I wanted to characterize the methodology to continuously provide high quality data. According to my results, the sublimation time was not a strict parameter, and the most important step was the first spraying condition. This means that the extraction conditions from the tissue section and co-crystallization of the matrix were the most important factors.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.219-226
• /
• 1996

A two-step approach has been used to obtain a new transition criterion for the stratified and nonstratified flow in horizontal pipe: (1) In the first step, a more general expression than the existing models for the flow transition criterion has been derived from the analysis of singular points and neutral stability conditions, or the parallel lines conditions of the transient one-dimensional two- phase flow equations of two-fluid model. (2) In the second step, introducing simplifications and incorporating a parameter into the general expression obtained in the first step to satisfy a number of physical conditions a priori specified, a new simple flow transition criterion for horizontal pipes has been derived. Comparison between results predicted by the present theory with the experimental data and theories in the pipe flow conditions, show good agreement.

• 설비공학논문집
• /
• 제6권1호
• /
• pp.1-10
• /
• 1994

The flow and heat transfer characteristics behind a backward facing step located in a vertical channel has been studied. In this study, the numerical prediction has been performed by solving the Navier-Stokes equation and energy equation simultaneously with the SIMPLE algorithm embedied in TEACH code. Local heat flux was measured by using Schlieren Interferometer. The flow visualization was performed using the cylindrical lens and the laser beam that is scattered by the supplied glycerine particles. The velocity and temperature distributions, recirculation region, reattachment length, and local heat flux are obtained under the various parameters to investigate the buoyancy effect on the flow and heat transfer characteristics behind the step.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권3호
• /
• pp.152-158
• /
• 2001

This paper proposes a simple feedforward compensator in order to decrease the amount of undershoots and overshoots on the step response in nonminimum phase systems. The compensator makes the step type input be a ramp input with saturation for 0$\leq$t<${\alpha}$. It is shown in this paper that the compensated system has small amount of undershoot and overshoot at the price of rise time compared to the system without compensator. Also, provided the system is properly stable, the influence of the design parameter ${\alpha}$ on the step response of the nonminimum phase system is investigated in the case of Type A, and Type B undershoot, which gives a guideline for the compensator design.