• Title/Summary/Keyword: Stem dry weight

Search Result 453, Processing Time 0.028 seconds

Coating Effects on Grass Seeds with Chitosan Solution (Chitosan 용액에 의한 목초 종자의 피복효과)

  • 이주삼;조익환;안종호
    • Korean Journal of Organic Agriculture
    • /
    • v.6 no.1
    • /
    • pp.51-61
    • /
    • 1997
  • This experiment was carried out to investigate the growth response of 3 grasses to seed coating with chitosan solution and the attempt was made to estimate adequate seed coating concentrations of chitosan solution in each grass for the growth to be stimulated. Three species used in this experiment were orchardgrass, tall fescue and reed canarygrass. Six different seed coating concentrations of chitosan solution were applied as 0%(control), 0.01%, 0.05%, 0.1% and 1.0%, respectively. the results were obtained as follows; 1. Dry weight of tiller(WT), leaf area(LA), dry weight of leaf(LW), dry weight of stem(SW), dry weight of shoot(SHW), biological yield(BY) and C/F ratio were significantly different between species. 2. Number of tillers per plant(NT), dry weight of tiller(WT), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW), biological yield(BY) and T/R ration were significantly different between seed coating concentrations of chitosan solution. 3. The adequate seed coating concentrations of chitosan solution for the growth stimulating effect were different between species. The highest values of yield components and dry weight of plant parts were obtained at 1% in orchardgrass and tall fescue, and 0.05% in reed canarygrass, respectively. 4. Growth stimulating effect of seed coating in each species were different. The highest values were obtained in leaf area(LA), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW) and dry weight of biological yield(BY) in orchardgrass. The values of dry weight of stem(SW) and C/F ration were highest in reed canarygrass. 5. An increase in number of tillers per plant(NT), dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in dry weight of shoot(SHW). Among the aboved increasing factors, the dry weight of leaf(LW) was a main factor for the increase in dry weight of shoot(SHW). 6. An increase in dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in biological yield(BY). Both the dry weight of leaf(LW) and dry weight of root(RW) were main factors for the increase in biological yield(BY).

  • PDF

Major Agronomic Characters and There Correlation Ships in Wanggol (Cyperus iwasakii Makino) Varieties (왕골 품종들의 주요특성 및 상관)

  • Jung-Il Lee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.1
    • /
    • pp.81-86
    • /
    • 1988
  • This experiment was carried out for estimating genetic parameters, such as heritabilities, the phenotrpic and genotypic correlations of major agronomic characters with 64 cultivars in wanggol. Heritabilities of leaf length, number of leaf, stem length, stem diameter, number of stem and dry weight of medulla were higher, but that of dry weight of cortical were relatively lower. The genotypic correlation coefficients between stem length and dry weight of medulla, and between stem length and dry weight of cortical showed highly positive correlation, and stem length, stem diameter and dry weight of medulla were significantly correlated with dry weight of cortical, those characters gave high direct effect as same level in path-coefficient analysis.

  • PDF

Varietal Difference of Dry Matter Weight of Stem and Leaf in Rape

  • Kwon, Byung-Sun;Shin, Jeong-Sik;Ahn, Gae-Soo
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2003.10b
    • /
    • pp.40-42
    • /
    • 2003
  • In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition and yield components were observed. Forage rape was superior to oil seed rape in terms of yield components, plant fresh weight and plant dry mater weight. Velox was superior to any other variety of forage rape in these characters. When plant dry matter weight of the rape was subdivided into four components such as a main stem, branch stems, main stem leaves and branch leaves, contribution of these components to plant dry matter weight was in the order of branch stems, branch leaves, the main stem and main stem leaves. Dry matter percentage of the rape ranged from 9.32 to 11.08 percent, which was somewhat low value. There was no significant difference between two groups of the rape in terms of dry matter percentage. Velox showed somewhat higher value in dry matter percentage.

  • PDF

Correlations among Morphological Characteristics of Panax quinquefolium Plants Grown .in British Columbia, Canada (Canada산 인삼의 형태 특성)

  • Smyth, S.R.;Bailey, W.G.;Skretkowiez, A.L.
    • Journal of Ginseng Research
    • /
    • v.12 no.2
    • /
    • pp.145-152
    • /
    • 1988
  • Correlations between various morphological characteristics of Panax quinquefolium plants grown in Lytton, British Columbia, Canada were assessed for 1-through 4-year old plants. Root dry weight, the dependent variable, was found to be strongly related to leaf dry weight, leaf length and root length for 1-and 2-year old plants during the middle of the growing season. For 1- and 2-year old plants at the end of the growing season, root dry weight was found to be related to leaf dry weight, leaf length and stem dry weight. For 3 and 4-year old plants, root dry weight was found to be related to leaf dry weight, leaf length and stem dry weight. For 3- and 4-year old plants, root dry weight was found to be related to leaf dry weight. For practical considerations, this latter relationship provides a simple method for selecting superior plants from which seed can be harvested.

  • PDF

Differences in Productivity among Rape Varieties for Oil Seed and Forage

  • Kwon, Byung-Sun;Lim, June-Taeg;Shin, Jeong-Sik;Ahn, Gae-Soo;Park, Hee-Jin
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.48 no.5
    • /
    • pp.376-380
    • /
    • 2003
  • In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition their and yield components were observed. Forage rape was superior to oil seed rape in terms of yield components, plant fresh weight and plant dry mater weight. Velox was superior to any other variety of forage rape in these characters. When plant dry matter weight of the rape was subdivided into four components such as a main stem, branch stems, main stem leaves and branch leaves, contribution of these components to plant dry matter weight was in the order of branch stems, branch leaves, the main stem and main stem leaves. Dry matter percentage of the rape ranged from 9.32 to 11.08 percent, which was somewhat low value. There was no significant difference between two groups of the rape in terms of dry matter percentage. Velox showed somewhat higher value in dry matter percentage.

Effects of Dye Bath Soil Type on Quality of Mat Rush (Juncus decipiens Nakai) (서로 다른 니염토가 골풀의 품질에 미치는 영향)

  • Lim, June-Taeg;Kwon, Byung-Sun;Jung, Dong-Soo;Kae, Bong-Myung;Hyun, Kyu-Hwan;Shin, Dong-Young
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.51 no.spc1
    • /
    • pp.229-232
    • /
    • 2006
  • This study was conducted to select the most suitable dye bath soil of mat rush for good quality. Dry stem weight ranged from 102.5 to 107.0 g, dry stem ratio ranged from 34 to 36%, color of stem ranged from soft gray to heavy gray, degree of softness ranged from high to low and degree of floating ranged from extremely high to low. All the good quality components, such as dry stem weight, dry stem ratio, color of stem, degree of softness and degree of floating showed large variations. Hadong white ceramic soil, the superior dye bath soil of mat rush, showed relatively superior values for all the good quality components with 102.5 g in light dry stem weight, 34% in high dry stem ratio, good color of soft gray in color stem, high in degree of softness and extremely high id degree of floating. The results indicate that dye bath soils shows different adaptabilities to a particular dye bath and Hadong white ceramic soil seems to be the most suitable dye bath soil of mat rush for good quality.

Studies on Dry Matter Production and Variation of Agronomic Characteristics of Determinate and Indeterminate Types of Soybean Cultivars (Glycine max L.) Under Different Growing Condition (유ㆍ무한형대두품종의 재배조건에 따른 건물생산 및 형질변이에 관한 연구)

  • Keun-Yong Park
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.17
    • /
    • pp.45-78
    • /
    • 1974
  • To provide useful information for developing new high yielding soybean varieties and for improving cultural practices, an investigation was made on variation of dry matter production and on relationship among several agronomic characters of soybean plants grown under different planting times and densities as well as under different fertilizer levels, using Kwang-kyo, Dong puk-tae, and Suke # 51 as determinate types and Shelby, SRF-300 and Harosoy as indeterminate types at the Crop Experiment Station during the period of 1972 and 1973. The results obtained were summarized as follow: 1. The dry weight, CGR and LAI at the initial flowering stage were high in the high plant population irrespective of varieties, planting times, and fertilizer levels. However, those characters of the indeterminate type were lower than those of the determinate types. The same characters of the indererminate type at the terminal leaf stage were either same or higher than those of the determinate types. 2. The dry weight of the determinate type at the initial flowering stage was similar to the indeterminate, type, when planting times were May 21 or June 15. The dry weights of both types of varieties were low when planted on July 10. When fertilizer levels were increased, the CGR, dry weight and LAI at the initial flowering stages were also increased. 3. Even though significant differences of LAI were obtained among the varieties within the same plant type, the indeterminate type was in general lower than that of the determinate type regardless of planting time and densities, or fertilizer levels, while the yield of the indeterminate type was comparable to the yield of the determinate type. 4. The high degree of leaf- and petiole-fall at the greenbean stage was highly associated with early planting and high levels of fertilizers. However, less amount of leaf- or petiole-fall was found when planted on July 10 or under low plant population. 5. The percent of stem weight was high under higher plant population, while the percent of leaf weight was high under lower plant population. When planting time was late, the percent of stem and petiole weight were reduced, while the leaf weight was increased. 6. The percent of pod weight of the determinate type at the terminal leaf stage was about 2% when planted on May 21, about 8% when planted on June 15, and about 9% when planted on July 10. The percent of pod weight of the indeterminate type at the terminal leaf stage were about 6 % when planted on May 21, 14% when planted on June 15 and 21% when planted on July 10. 7. Kwang kyo showed less degree of leaf-fall even when lodged due to high levels of fertilizer applied, while SRF-300 showed great damage due to lodging. 8. High yields were obtained when planted on May 21, but there were little yield differences between yields from May 21 and June 15 plantings. The reduction of yield due to late planting of July 10 was less apparent in the determinate type of varieties, while it was high in the indeterminate type. 9. The optimum plant population per are for high yield was 1, 250 to 2, 500 plants when planted on May 21, 2, 500 plants when planted on June 15, and 3, 333 plants when planted on July 10. 10. High correlation coefficients were obtained between dry matter weight and LAI at the terminal leaf stages, and between the dry matter weight and yield at the greenbean stages. The optimum dry weight for high yield in the determinate type was expected to be 25 kg. per are at the initial flowering stage and 50 kg. per are at the terminal leaf stage. In the indeterminate type the LAI and dry weight at the greenbean stage were 4 to 5 and 80 kg. per are, respectively. 11. Under the high plant population plant height was increased, while the stem diameter and the number of nodes and branches were reduced. Consequently, the percent of mainstem to main stem plus branches were increased, and the length of internode was also elongated. The ratios of stem weight, number of nodes and pods, and yield of main stem were increased when high plant population was associated with the early planting. The percent of main stem to branches for the indeterminate type was higher than that of the determinate type. 12. Under the high plant densities and late planting, the percent of the pod number and yields of main stem were increased, indicating that varieties with no or less branches were better adaptable under such conditions. 13. High degree of simple correlation coefficients was obtained between the LAI at the initial flowering stage and terminal leaf stage, and the total node number, dry matter and dry stem weight of both determinate and indeterminate types. Even though no significant correlation was found between the LAI at the initial flowering stage of the determinate type and the stem length and pod number per are, highly significant correlation coefficients were obtained between such characters in the indeterminate type of varieties. 14. The dry matter was positively correlated with the LAI, CGR, stem length, and pod number, node number and dry stem weight per are, while no significant correlation was found between the dry matter and stem diameter. 15. The correlation coefficients between lodging index and the LAI, dry weight, stem length and dry stem weight were highly significant. Negative correlation was obtained for the indeterminate type between the stem diameter and lodging index. The correlation coefficient between the stem diameter and lodging index was non-significant for the determinate type, while positive correlation was obtained between the yield and lodging index in the determinate type. The lodging index was also positively correlated with average length of internode of main stem. 16. The 100 seed weight appeared to be lowered under the high plant population and no fertilizer condition, and when planted late. Apparent differences of 100 seed weight were found between main stem and branches, being higher for the main stem than for the branches. 17. No variation of protein content was found due to different cultural practices. However, the oil content was apparently reduced when planted late.

  • PDF

갈참나무 수엽의 사료가치 및 생엽량 추정에 관한 연구 ( Nutritive Value and Biomass Estimation of Oriental White Oak ( Quercus aliena Blume ) Browse )

  • 김득수;이인덕
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.14 no.2
    • /
    • pp.120-124
    • /
    • 1994
  • Browse from oriental white oak(Quercus aliena Blume) was analysed for nutritive value and biomass estimation. The content of cmde protein was high on August and September. NDF, ADF and lignin contents were increased with progressing the seasons but IVDMD, TDN, DE and ME levels were not different from the variation of seasons. Tannin content was high on May and June. Basal stem diameter $\times$ height of tress was highly correlated with browse dry weights(r=0.80**) and the linear regression equation are the follows; Y = 8.23 + O.57X(Y = browse dry weight(g), X= basal stem diameter $\times$ height(cm)). Using the traditional cutting method, the amounts of browse was determined as 823 g dry weight per tree, while the new method by the above equation gave a similar results, i. e., 793 g dry weight per tree. The possibility of browse biomass estimation of oriental white oak by the basal stem diameter $\times$ height index was found.

  • PDF

Biomass Production of One-year-old Hybrid Poplars and Its Estimation (식재 당년생 신품종 포플러류의 Biomass 생산량 및 생산량 추정)

  • Koo, Yeong-Bon;Shim, Sang-Yung;Noh, Eui-Rae
    • Journal of Korea Foresty Energy
    • /
    • v.7 no.1
    • /
    • pp.22-27
    • /
    • 1987
  • Above ground biomass production of one-year-old hybrid poplars was investigated to select the best clones which are suitable for short rotation forestry. The results were as follows: 1. Average dry weight of Populus alba X P. glandulosa Fl clones was 2.86 for stem,0.41 for branches 0.70 for leaves and 3.97 t/ha for total. and the ratios of green weight to dry weight were 0.47 for stem,0.36 for branches,0.31 for leaves and 0.42 for total. Dry weight of Populus nigra X P. maximowiczii Fl clones was 1.48 for stem, 0.54 for branches.0.71 for loaves and 2.73t/ha for total, and the ratios of green weight to dry weight were 0.42 for stem. 0.37 for branches, 0.28 for leaves and 0.36 for total. 2. Biomass production (green and dry weight)of Populus alba X P. glandulosa F1 clones can be predicted by diameter measurement only, but biomass production of Populus nigra X P. maximowiczii F1 clones can not be predicted by any of investigated characteristics. 3. Dry weight distribution of pepulus alba X P. glandulosa Fl clones were 73$\%$ for stem, 10$\%$ for branches and 17$\%$ for leaves, and dry weight distribution of P. Populus nigra X P. maximowiczii F1 clones were 54$\%$ for stem, 20$\%$ for branches and 26$\%$ for leaves.

  • PDF

Morphological Characteristics, and Coefficient of Variation, Heritability and Genetic Advance of Major Cultivars of Spray Chrysanthemum (주요 스프레이 국화 품종의 형태적 특성과 변이계수, 유전율 및 유전자 전이율)

  • Shim, Sung-Im;Lim, Ki-Byung;Kim, Chang-Kil;Chung, Mi-Young;Kim, Kyung-Min;Chung, Jae-Dong
    • Horticultural Science & Technology
    • /
    • v.34 no.2
    • /
    • pp.269-281
    • /
    • 2016
  • The statistical analyses of coefficient of variation, heritability, and genetic advance were carried out to identify differences in morphological characteristics, such as the stem and inflorescence length, of 10 major commercial cultivars of spray chrysanthemum (Chrysanthemum morifolium). For morphological characteristics, stem lengths ranged from 46.4 cm to 54.9 cm, the maximum diameter of stem was 5.6 to 8.5 mm, the hardness of the stem was 0.17 to $0.70kg{\cdot}m^{-2}$, the fresh weight of stem was 7.5 to 17.5 g, the dry weight of the stem was 1.6 to 3.3 g, the ratio of dry weight/fresh weight of stem was 15.9% to 23.1%. Also, the number of leaves on the stem was 8.4 to 12.2, the stem leaf area was 17.8 to $37.8m^2$, the fresh weight stem leaves was 5.3 to 18.6 g, the dry weight was 0.5 to 1.4 g and the ratio of dry weight /fresh weight of stem leaves was 7.6% to 11.5%. The inflorescence length ranged from 10.1 to 18.6 cm, the fresh weight of inflorescence was 7.3 to 26.7 g, the dry weight of inflorescence was 1.2 to 2.8 g, the ratio of dry weight /fresh weight of inflorescence was 10.4% to 17.1%. For flower, the diameter of the flower center was 8.2 to 13.3 mm, the petal width was 5.7 to 14.0 mm, the petal length was 12.9 to 33.1 mm, and the petal thickness was 157.8 to $354.4{\mu}m$. The mean values of each character in each cultivar were very different, and DMRT and LSD values based on morphological characteristics among 10 cultivars were highly significant. For variability and genetic parameters, the lowest CV (coefficient of variation), PCV (phenotypic coefficient of variation), and GCV (genotypic coefficient of variation) were 4.79% to 5.15% in stem length, and the highest variations were 62.97% to 65.21% in leaf area. ECV (error or environmental coefficient of variation) was the lowest for leaf area (1.71%) and it was the highest for leaf dry weight (19.30%). Heritability also significantly differed among the characteristics, ranging from 68.69% to 99.67%, the lowest value was shown in ratio of dry weight /fresh weight of stem and the highest value was for leaf area of stem. The value for genetic advance was the lowest in hardness of stem at 0.30 and the highest in leaf thickness at 156.65. The lowest genetic advance as percentage of mean of stem hardness was 9.17%, while the highest percentage of stem length was 134.27%. Thus the characters which had the highest values indicated above show the influence of additive gene action and may provide useful resources for selection programs for agronomic improvement.