• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2304-2311
• /
• 2021

The dislocation density in strain-hardened Alloy 690 was analyzed using scanning transmission electron microscopy (STEM) to study the relationship between the local plastic strain and susceptibility to primary water stress corrosion cracking (PWSCC) in nuclear power plants. The test material was cold-rolled at various thickness reduction ratios from 10% to 40% to simulate the strain-hardening condition of plant components. The dislocation densities were measured at grain boundaries (GB) and in grain interiors of strain-hardened specimens from STEM images. The dislocation density in the grain interior monotonically increased as the strain-hardening proceeded, while the dislocation density at the GB increased with strain-hardening up to 20% but slightly decreases upon further deformation to 40%. The decreased dislocation density at the GB was attributed to the formation of deformation twins. After the PWSCC growth test of strain-hardened Alloy 690, the fraction of intergranular (IG) fracture was obtained from fractography. In contrast to the change in the dislocation density with strain-hardening, the fraction of IG fracture increased remarkably when strain-hardened over 20%. From the results, it was suggested that the PWSCC growth behavior of strain-hardened Alloy 690 not only depends on the dislocation density, but also on the microstructural defects at the GB.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.304-308
• /
• 2007

In order to find out the optimum fertilizer level and planting density of high yielding variety, $Okayma^{#2}$, this experiment was conducted with 3 compositions of fertilizer levels and a different plant density at the experiment paddy field of mat rush in Mokpo Experiment Station, National Institute of Crop Science, RDA. $Okayma^{#2}$, mat rush variety was grown under different fertilizer level and planting density with the highest yielding. Yield components such as stem length, number of stem were highest at the plots with fertilizer level (kg/10a), 80-20-40 and planting density, 20 ${\times}$ 10cm. Judging from the results reported above, at optimum fertilizer level and planting density of mat rush seemed to be 80-20-40kg/10a fertilizer and 20cm row spacing and l0cm or I5cm planting spacing.

• Korean Journal of Environment and Ecology
• /
• v.21 no.6
• /
• pp.554-558
• /
• 2007

Current biomass stock of forest has been calculated by using biomass expansion factors (BEFs) that convert timber volumes to dry weight and stem density. The objective of this study was to estimate stem density values and to develop BEFs that are dependent on tree age classes for Quercus acuta stands in Jeonnam Wando-gun. Sample trees on the three different age classes were harvested to obtain each components biomass with stem analysis. Stem density values as tree age classes were ranged from 0.557 to 0.636. Aboveground BEFs were ranged from 1.168 to 1.324. BEFs were increased with increasing age classes. There was a significant difference between BEFs and stem density values with tree age classes. These results suggest that the reliability of the national carbon stock inventory could be improved by applying age classes BEFs, which are formulated on the basis of representative for Quercus acuta.

• Korean Journal of Plant Resources
• /
• v.12 no.4
• /
• pp.269-275
• /
• 1999

For the purpose of sweet potato varietal improvement, yulmi, shinyulmi, gunmi, hongmi, and seonmi, whose source and sink are different, were cultivated at different planting densities, and then defoliation at initial stage of tuberous root weight increase on the relation of source and sink was observed as follows. The response of stem and leaf and tuberous root weight by planting density and defoliation rate of sweet potato varieties was different. Stem and leaf weight per m$^2$ increased along with dense planting by the following order; shinyulmi> seonmi> hongmi> gunmi> yulmi. Tuberous root number per m$^2$ was the most at 75$\times$20cm planting density, showing seonmi the most number. The number of stem and leaf and tuberous root increased along with the lowered rate of defoliation. In case of 75$\times$10cm and 75$\times$20cm planting density, tuberous root weight increased by increase of stem and leaf weight up to 50% defoliation and the difference of stem and leaf and tuberous root number was low as defoliation rate increases. The tuberous root and total dry weight matter was the most at 75$\times$20cm planting density. The increase and decrease of source synchronized with those of sink at 75$\times$10cm and 75$\times$20cm, however the relationship occurred less at 75$\times$30cm.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.289-292
• /
• 2002

The corneal tissue consists of three layers : epithelium, stroma, and endothelium. Central cornea is a highly differentiated tissue whereas the limbus contains the epithelial stem cell. In the present study. we report the engineering of the three-dimensional reconstructed cornea derived from rabbit limbal epithelial and stromal cells. The differentiation degree of corneal stem cells were assessed in serum concentration and inoculation density of stromal cells. Optimal condition differentiation of corneal stem cells is achieved when 5% FBS was supplemented to culture medium and $1-2{\times}10^5$ cells/ml inoculation density of stromal cells.

• Molecules and Cells
• /
• v.44 no.11
• /
• pp.851-860
• /
• 2021

Label-free optical diffraction tomography (ODT), an imaging technology that does not require fluorescent labeling or other pre-processing, can overcome the limitations of conventional cell imaging technologies, such as fluorescence and electron microscopy. In this study, we used ODT to characterize the cellular organelles of three different stem cells-namely, human liver derived stem cell, human umbilical cord matrix derived mesenchymal stem cell, and human induced pluripotent stem cell-based on their refractive index and volume of organelles. The physical property of each stem cell was compared with that of fibroblast. Based on our findings, the characteristic physical properties of specific stem cells can be quantitatively distinguished based on their refractive index and volume of cellular organelles. Altogether, the method employed herein could aid in the distinction of living stem cells from normal cells without the use of fluorescence or specific biomarkers.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.5
• /
• pp.17-23
• /
• 2017

In South Korea, 25 % of annual agricultural residues (11.64 million tons) are unused. The hydrophilicity, low lower heating value (LHV), and low energy density of agricultural residues can be obstacles for efficient usage. Torrefaction, a low temperature pyrolysis process, can be a solution to overcome these disadvantage of agricultural residues. In this study, agricultural residues such as bean stem, pepper stem, perilla stem, sorghum stem, acorn shell, and ginkgo shell are torrefied at 200, 230, and $250^{\circ}C$ and evaluated energy properties, respectively. The torrefaction can increase the LHV and energy density rate of agricultural residues from 3,331~4,444 kcal/kg to 4,166~5,830 kcal/kg and 20~30 %, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.64-69
• /
• 2008

The objective of experiment was to investigate the effects of planting density on growth and yield of vegetable soybean, and to clarify the optimum planting density of vegetable soybean in the middle west region of Korea. The field experiment with 4 levels of planting density was carried out at Yesan area in $2005{\sim}2006$. The days from seeding to flowering and the days from seeding to harvesting and lodging were not significantly different among planting distance. The stem length was increased as planting distance was shortened but the number of node, branch, pod per branch, pod per individual, weight of stem and pod, one hundred pod weight and rate of 2+3 seed per pod were decreased as planting density was increased. The size of vegetable soybeans was not significantly different among planting distance, but the harvest index of vegetable soybean was decreased as planting distance was shortened. Yield of vegetable soybean was increased as planting distance was decreased. However, the approriate densities for stem and pod weight per a plant, number of pod per a branch and the vegetable soybean yield of 2+3 seed per pod were different from that density. The optimal planting distance of varieties was $60{\sim}25\;cm$ in Sunheukkong and Ilpumgeomjeongkong and was $60{\sim}35\;cm$ in Galmikong.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.196-202
• /
• 2008

To establish a cultivation system of Sedum sarmentosum using a rice nursery tray ($30{\times}60{\times}3\;cm$) in non-heating plastic film house, cuttings of two local strains (Wanju and Keumsan) were prepared and planted at different planting densities (40, 60 and 80 cuttings per tray) on September 7th, and subsequent growth and yield at pre- and post-winter season were investigated. When pre-wintering growth were measured at 60 days after planting, high planting density (80 cuttings/tray) decreased leaf length and lateral shoot number per plant compared to 40 cuttings/tray. When post-wintering growth were measured on April 20th, no significant growth differences as affected by planting density were observed in Keumsan strain, while decreased stem diameter, node number and leaf number were observed in Wanju strain planted at 80 cuttings/tray compared to 40 cuttings/tray. Fresh and dry weights were not significantly different as affected by planting density, but those were significantly increased in Wanju strain compared to Keumsan strain. When regrowth characteristics followed by the first harvest were measured on June 5th, significantly increased stem number was observed at 80 cuttings/tray compared to 40 cuttings/ tray. Fresh and dry weight were significantly increased in Keumsan strain planted at 80 cuttings/tray compared to 40 cuttings/tray, and dry weight were increased in Wanju strain compared to Keumsan strain. Wanju strain showed higher shoot yield, thicker stem, shorter node and larger leaf, and non-succulent stem under high planting density compared to Keumsan strain. Accordingly, the optimum density was 40 cuttings per tray, and Wanju strain was adequate for the cultivation system using a rice nursery tray.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.215-222
• /
• 1996

This study was conducted to compare the growth and yield, and to determine the optimum planting date and density in two improved black soybean varieties. The two varieties were planted by driller attached a tractor on May 21 and June 19, 1993, and treated five planting densities, respectively. Yield of Gumjeongkong 1 was similer for both planting dates, but that of Suwon 157 was remarkably reduced on June 19 planting compared to May 21. There was significant differences between planting dates in stem length, number of branches, seeds per plant, seed weight and yield. Planting density, also, significantly affected on stem length, number of branches and seeds per plant. Statistically significant interactions between planting date$\times$variety and planting date$\times$planting density were found at almost all characteristics, except between variety$\times$planting density. Optimum planting date and density of Gumjeongkong 1 for high yield were June 19 and 33, 000 plants per l0a, and those of Suwon 157 were May 21 and 22, 000 plants per l0a, respectively. The coefficient of variation at different planting densities was high at stem length, number of branches, seeds per plant and yield, but low at number of main stem node, seeds per pod and 100 seed weight.