• 한국약용작물학회지
• /
• 제25권6호
• /
• pp.381-388
• /
• 2017

Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 cm to 40.5 cm, with showing approximately 40% having a stem length of 20 - 30 mm. Stem diameters ranged from 2.7 mm to 11.3 mm. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from $28^{\circ}$ to $89^{\circ}$ and seedstalk length ranged from 5.6 cm to 27.3 cm. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.

• 한국산림과학회지
• /
• 제94권5호통권162호
• /
• pp.313-320
• /
• 2005

This study was performed in a 38-year-old Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantation in northeast China. Data were collected from 5 sample trees with different canopy position ranging in DBH from 14.6 cm to 23.8 cm. Sawn speciments that included the biggest knot were taken from the stem below the living crown. Number and distribution of knots per whorl below the living crown were studied by relative height below living crown (RHBC). A linear model expressed as function of whorl age (AGE), whorl height ($H_k$) and the stem diameter at which the whorl was located ($D_k$) was developed to predict the knot diameter and angle. The number of annual rings in four periods and the width of respective zone alone stem were used as dependant variables to analyze the knot develop phases. In average, the number of years from branch birth to ceased forming rings was 7.8, the branches remained alive for 4.2 years without forming annual rings, and branches were occluded 14.4 years after their death. These results can provide abundance branch and knot information so as to describe current and past tree growth dynamic of Mongolian pine plantation.

• 한국해안해양공학회지
• /
• 제19권5호
• /
• pp.446-456
• /
• 2007

본 연구에서는 Lynett and Liu(2004a, b)에 의해 유도된 2층 Boussineaq방정식을 이용하여 일정수심상의 규칙파 조건에서 직립벽을 따른 연파를 해석하고, 수리모형실험결과 및 포물형근사식에 의한 해석결과와 비교하였다. 두 가지 수치모형에 의한 해석결과는 수리실험결과와 비교적 잘 일치하였으나, 입사각이 증가할수록 Boussinesq 모형이 포물형모형보다 우수한 결과를 주는 것으로 나타났다. 특히 파랑의 비선형성에 의한 고차 조화성분의 발생은 Boussinesq모형에서만 관찰되었다.

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.315-324
• /
• 1996

This study was one of a series of studies on application of machine vision and image processing to extract the geometrical features of plants and to analyze plant growth. Several algorithms were developed to measure morphological properties of plants and describing the growth development of in-situ lettuce(Lactuca sativa L.). Canopy, centroid, leaf density and fractal dimension of plant were measured from a top viewed binary image. It was capable of identifying plants by a thinning top viewed image. Overlapping the thinning side viewed image with a side viewed binary image of plant was very effective to auto-detect meaningful nodes associated with canopy components such as stem, branch, petiole and leaf. And, plant height, stem diameter, number and angle of branches, and internode length and so on were analyzed by using meaningful nodes extracted from overlapped side viewed images. Canopy, leaf density and fractal dimension showed high relation with fresh weight or growth pattern of in-situ lettuces. It was concluded that machine vision system and image processing techniques are very useful in extracting geometrical features and monitoring plant growth, although interactive methods, for some applications, were required.

• 소성∙가공
• /
• 제15권3호
• /
• pp.226-231
• /
• 2006

The fuel injector is a pa.1 that controls the fuel supply of automotive engine. The housing of the fuel injector supports the rod, the needle valve and the solenoid. In this study, the rigid-plastic FE-analysis by using the design of experiments (DOE) and the response surface methodology (RSM) has been performed to produce the product reducing the under-fill and the maximum effective strain. From the results of DOE, the stem of counter punch and the face angle of punch at the $1^{st}$ process, and the stem of punch at the $2^{nd}$ process were determined as the significant design variables far each response such as the upper under-fill, lower under-fill and the maximum effective strain. From the results of RSM, the optimal values of the design variables have been also determined by simultaneously considering the responses.

• 생물환경조절학회지
• /
• 제28권4호
• /
• pp.322-327
• /
• 2019

접목시기의 줄기직경을 조사한 결과 토마토 접수는 $2.5{\pm}0.3mm$, 대목은 $3.1{\pm}0.7mm$인 것으로 조사되었고, 오이 접수는 $2.2{\pm}0.2mm$, 대목은 약 $3.6{\pm}0.3mm$인 것으로 조사되었다. 절단 기준점의 높이 차는 4mm 이상일 때 대부분의 모종에 대해 접촉면이 작아 접목 불량이 발생하였고, 2mm 이하일 때 접수와 대목의 절단면 겹침으로 인하여 접촉부가 작아 불량이 발생하는 것으로 분석되어 3mm가 적당한 것으로 사료된다. 접수 및 대목 줄기직경이 모두 얇을 경우 접수 및 대목 중 하나의 줄기직경이 평균값 이상을 이용해야 하는 것으로 분석되었다. 또한 줄기의 절단 각도는 인력으로 작업하기 때문에 접수는 $13{\sim}55^{\circ}$, 대목은 $15{\sim}67^{\circ}$의 범위로 다양한 것으로 조사되어 접목 불량의 원인이 될 수 있으므로 기계절단을 통하여 접수와 대목의 절단각도를 일치시킴으로써 접목성공률을 향상 시킬 필요가 있을 것으로 사료된다. 모종 줄기 절단면 촬영 및 영상처리로 모종의 휨을 인식 및 계산하여 그립퍼의 회전각을 제어하여 정확도 시험을 실시한 결과 접수와 대목 절단면은 정확히 접합되는 것으로 조사되었다. 영상 인식 기술을 적용한 접목로봇을 이용하여 오이와 토마토에 대한 접목시험을 실시한 결과 오이는 $96{\pm}3.2%$, 토마토는 $95{\pm}4%$의 접목 성공률이 조사되었다.

• Journal of Biosystems Engineering
• /
• 제10권1호
• /
• pp.13-23
• /
• 1985

Spraying method from the paddy-field levee is known to give insufficient penetration of the spray droplets to the rice stem of the densely grown plants, which is generally encountered at the last stage of rice growth. This study was intended to investigate the spraying system to solve this existing problem. As an approach, it was attempted to develop the boom-with-nozzle, between-the-row application system. Several types of nozzles and their different arrangements in the boom were tested in the field to measure the penetration-reaching distance and the uniformity of spray droplet distribution. The results of the study are summarized as follows: 1. Field experiments by the spraying method from the paddy-field levee showed to have practically no penetration of the spray droplets to the portion of the plant stem with the normal flow volume generally applied and thus need for improving present spraying method. 2. It was found that, considering both the uniformity of the spray droplet distribution and performance rate, the most efficient type of nozzle in the between-the-row boom-type spraying system was one that has core-insert hollow-cone with some clearance between the cone and tip. 3. When tested by applying the spraying method of between-the-row, the nozzle pressure did not affect the uniformity of spray droplet distribution. However, the nozzle pressure had a positive effect on the penetrating-reaching distance of the facing side of the rice stem and did not affect much on that of the opposite face of the stem. It was also found that the maximum pressure to affect the penetration-reaching distance was about $10kg/cm^2$. 4. The uniformity of the spray droplet distribution in the between-the-row system was greatly affected by the height and orientation of the nozzles in the boom. Based on experimental work for the different type of the boom-with-nozzle arrangements, it is recommended that the position of nozzle is set at about 0.45 m above the ground and two nozzles in the boom are oriented to be faced with each other with some angle such that the droplet stream from the nozzle would not directly face with each other.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.244-248
• /
• 2000

199년경 한국 남해안 어선의 특징은 독창적이고 견고하여 한반도 주변의 해양조건에 적합하고 우리 선조들의 훌륭한 조선기술을 확인할 수 있었으며, 그 결과를 요약하면 다음과 같다. (1) 본 연구에 사용한 시험대상 어선은 고대 어선에 비하여 비교적 세형으로서 1900년경의 선형이 개량되었음을 알 수 있었다. (2) 용골은 각형단면인 방형용골(bar keel)로 되어 있으며, 선수부는 방형선수재의 구조로서 예리한 pointed stem을 이루고 있다. (3) 외판은 턱붙이 클링커 이음방법으로 접합되어 있었다. (4) 권형망어선의 L/B, L/D, B/D의 값이 자망어선의 값에 비하여 크게 나타났다. (5) 복원성은 두 선박이 양호한 편이며 권형망어선이 자망어선에 비해서 더 우수한 것으로 나타났다.

• 원예과학기술지
• /
• 제33권1호
• /
• pp.11-17
• /
• 2015

The study was conducted to investigate the effect of rootstock on growth and early yield of stenting-propagated cut roses (Rosa hybrida Hort.) 'Pink Aurora' and 'Yellow King'. The scions, prepared as single-node cuttings, each with a five-leaflet leaf, were grafted onto cuttings of Rosa indica 'Major', Rosa multiflora 'Chille Wonye No. 1', Rosa multiflora 'K-1', or Rosa multiflora 'Burr' as the rootstock. The rootstock cuttings were removed of all leaves and buds before grafting. The base of scion and the top of rootstock were held together and simultaneously cut at a $45^{\circ}$ angle for ease of grafting. Scion-rootstock unions were stuck in rockwool cubes and placed on a misted glasshouse bench for rooting before being transplanted into a rockwool slabs for cultivation. Rooting was the greatest in the 'Pink Aurora' and 'Yellow King' grafted on the rootstock Rosa indica 'Major'. In 'Pink Aurora', stem length, stem diameter, five-leaflet leaves per stem, and stem fresh weight of the harvested cut flowers were not affected by the rootstock. The greatest total yield of 'Pink Aurora' was obtained in plants grafted onto the Rosa indica 'Major' rootstock. Overall growth of 'Yellow King' was the greatest in plants grafted onto Rosa multiflora 'Burr' rootstock, although total yield was not affected by the rootstock. These results suggest that Rosa indica 'Major' is the most effective rootstock not only for rooting, but also for early yield and growth for stenting propagation of these cut roses.

• 한국연초학회지
• /
• 제5권2호
• /
• pp.25-32
• /
• 1983

To obtain basic information on the breeding of burley tobacco, classification of 41 varieties was carried out by using the cluster analysis of correlation coefficients and taxonomic distance based on twenty-one agromonic characters. Eight characters, such as days to flowering, length of flower axis, internode length, leaf length, yield, leaf angle to stem, vein angle to midrib and plant height, were useful in monothetic classification. Forty-one varieties were classified into four groups (I, II, III and IV) with weighted variable group method (WVGM ) and weighted jai. group method(WPGM), whereas the results classification of 33 varieties among them by WVGM were coincident with the results by WPGM. As for the characteristics of each group, group I related to late maturity, tall height and high yield, group II related to intermediate maturity, tall height and low yield, group 19 related to early maturity, intermediate height and low yield, and group W related to early maturity, short height and intermediate yield.