• Journal of Korea Trade
• /
• 제25권4호
• /
• pp.1-16
• /
• 2021

Purpose - This study reviews changes in the steel export-import structure between Korea and Japan to strengthen the competitive advantage of the Korea Steel industry using a trade-related index. Design/methodology - This study focuses on analyzing comparative advantage based on the trade intensity index (TII), revealed comparative advantage index (RCA), and trade specialization index (TSI). Findings - Korea's steel import from Japan increased due to the domestic supply shortage of HR (Hot Rolled Coil) and Plate, rather than the sharp decline of the domestic steel industry's competitiveness in 2010. However, after the completion of Hyundai Steel's blast furnace, the Korea Steel industry solved the supply shortage. Additionally, the import of Japanese steel products had decreased significantly from 2009 to 2019. Originality/value - This study attempts to analyze Japanese steel products' competitiveness in trade and the domestic influence of high-quality Japanese steel products. These results are connected to domestic steel supply and demand structure and relations with the Japanese steel industry. After completing Hyundai Steel's blast furnace, the Korea Steel industry solved the supply shortage, and the import of Japanese steel products has decreased significantly from 2009 to 2019.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.270-275
• /
• 2010

Technical issues of steel industry change along with other industrial progresses. Traditionally, steel protection from corrosion environment was the major issue and galvanic metal coatings were mainly used to extend the lifetime of steel products. Nowadays, requirements for steel have become more diversified. More various surface and material properties are required from different field of applications. Naturally, functional surface coating has become one of the most studied areas in steel industry. For functional surface coating, various process technologies and coating products are investigated. In this article, recent trends of functional coating technologies and products are introduced with brief technical descriptions of representative coating products.

• Computers and Concrete
• /
• 제19권3호
• /
• pp.257-262
• /
• 2017

The aim of this study is to investigate the pH threshold value for the corrosion of steel reinforcement in concrete. A method was designed to attain the pH value of the pore solution on the location of the steel in concrete. Then the pH values of the pore solution on the location of steel in concrete were changed by exposing the samples to the environment (CO25%, RH 40%) to accelerate carbonation with different periods. Based on this, the pH threshold value for the corrosion of steel reinforcement had been examined by the methods of half-cell potential and electrochemical impedance spectra (EIS). The results have indicated that the pH threshold value for the initial corrosion of steel reinforcement in concrete was 11.21. However, in the carbonated concrete, agreement among whether steel corrosion was initiatory determined by the detection methods mentioned above could be found.

• 아태비즈니스연구
• /
• 제8권1호
• /
• pp.67-77
• /
• 2017

The purpose of this study was to analysis Korean market competitiveness of Chinese metal items. Methods of analysis were Market Share Index, Market Comparative Advantage. The data was collected through Korean Materials & Components Technology Network and period of analysis were 2009-2016. Chinese main 6 metal items which recorded high-ranked export sum and exported to Korea in 2009-2016. From this study, following results were found. i) In searching trade balance aspects through MSI, highly ranked Chinese metal items in Korea market were steel rolling, pressing&elongation products, steel tubes, steel casting industry. ii) In searching market advantage aspects through MCA, Chinese metal items have strong competitiveness in Korea market. especially, steel rolling, pressing & elongation products, steel tubes, steel casting industry had strong competitiveness in Korea Market. In conclusion, we found that most of Chines metal items have competitiveness in Korea market. Especially, steel rolling, pressing & elongation products had very strong competitiveness in Korea market.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.27-35
• /
• 2009

주요 철골구조체는 일정한 시간동안 내화성능을 발휘하기 위한 내화조치를 필요로 한다. 본 연구는 철골기둥의 내화피복 국내인정 제품의 내화성능을 분석 평가함을 목적으로 한다. 대상제품은 보드피복과 뿜칠피복 두 종류의 제품을 대상으로 하여 샘플연구를 하였다. 국내기준과 유럽기준에 기초하여 제품의 내화성능을 분석하였다. 또한 국내기준을 유럽기준의 성능설계관점에서 분석 고찰하였다. 온도적 측면에서 국내기준의 내화성능은 일반적으로 안전하다고 사료되지만, 재료의 물성치 자료확충, 강재온도 산정방법, 프로필계수, 화재시 내력검증 등의 특성을 반영할 필요가 있다고 사료된다.

• 무역학회지
• /
• 제44권5호
• /
• pp.127-142
• /
• 2019

As Korea's steel industry exports 38 percent of its total steel production, the future management environment of the steel industry will change depending on the outcome of the FTA negotiations. The overall industrial structure of the domestic steel industry depends on the rules of origin, which are directly linked to the effect of concessionary tariffs. Therefore, negotiations on rules of origin are as important as tariff liberalization for Korea's steel industry. Korea's cold-rolled and plated companies are expected to be negatively affected as the country of origin standards of steel products have not considered the steel production processes in Korea. In future FTA talks, the country of origin rules should be agreed on a change of tariff classification basis. This result would secure a stable export market through increased predictability of steelmakers and reduce the risk of increased costs of oil and intangible products. In addition, the government should consider the structure of domestic supply and demand so that it does not impose constraints on the change of tariff classification. Finally, participants in the negotiations should consider the opinions of the domestic steel industry.

• 대한금속재료학회지
• /
• 제46권11호
• /
• pp.713-724
• /
• 2008

The need to lower the weights of automotive vehicle and to improve the safety of cars has resulted in the development of high strength steels such as TRIP(Transformation Induced Plasticity) and DP (Dual Phase) steel. It is well known that the higher strength of steel shows the poorer press formability. Among the high strength steels, DP steel shows several good characteristics such as low yield ratio, high initial n value, high elongation, high bake hardenability and anti-aging property. However, there's a certain limit in application of DP steels to the automotive panel parts because their poor deep drawbility caused by martensite. In this study, the effect of alloying elements on the deep drawability and recrystallization texture in TS 440MPa grade DP steel with 0.015~0.02% carbon has been investigated on the base of SEM, TEM, XRD and EBSD analysis.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.379-387
• /
• 2008

The pH & alkalinity adjustment method by lime and carbon dioxide($CO_2$) for corrosion control in water distribution system was investigated to evaluate the corrosion characteristics of metal pipes, such as galvanized iron, copper, stainless steel, and carbon steel. When the pH in sand filtered and ozone+GAC treated water was increased with lime and $CO_2$ from 7.5 to 8.0, the concentration of residual chlorine decreased at higher pH and longer reaction time; the concentration of trihalomethane increased. The corrosion rate of coupons with corrosion control using lime and carbon dioxide was showed much smaller than those without corrosion control using pilot-scale simulated distribution system. The galvanized iron was corroded much faster than carbon steel, copper, and stainless steel. Especially, copper and stainless steel coupons were hardly corroded. The galvanized iron and carbon steel coupons with corrosion control were produced the corrosion products less than those without corrosion control by the results of environmental scanning electron microscope(ESEM) and energy dispersive x-ray spectroscopy(EDS) analyses. The galvanized iron coupon with pH and alkalinity adjustment by lime and carbon dioxide was detected about 30 percent of zinc, when the carbon steel was detected about 30 percent of calcium by calcium carbonate products formation. For the results of X-ray diffraction(XRD) analyses, the goethite(${\alpha}$-FeOOH) was identified as primary corrosion product of galvanized iron without corrosion control, while the Zinc oxide(ZnO) was found on corrosion products of galvanized iron coupon with corrosion control as the results of EDS analyses. However, the carbon steel corrosion products regardless of corrosion control were composed predominantly of maghemite(${\gamma}-Fe_2O_3$) and hematite(${\alpha}-Fe_2O_3$).

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.121-130
• /
• 2024

In recent years, Zn-Al-Mg alloy galvanized steel sheets have been widely used as coated steel sheets to support social capital in the infrastructure field. A feature of Zn-Al-Mg alloy-coated steel sheets is that they provide a better corrosion protection period than Zn-coated steel sheets. In this study, the corrosion resistance of a new Zn-Al-Mg alloy-coated steel sheet was investigated and compared to that of conventional commercially available coated steel sheets. The investigation confirmed that increasing the Mg concentration in the Zn-Al-Mg-coated steel sheet improved corrosion resistance, which was more than 10 times that of the galvanized steel sheet specified in JIS G 3302. The study findings also confirmed that the corrosion resistance reached more than twice that of the coated steel sheet specified in JIS G 3323. If such galvanized steel sheets are applied to social infrastructures that are exposed to severely corrosive environments, the service life of the infrastructure might be extended.

• 대한안전경영과학회지
• /
• 제13권4호
• /
• pp.213-223
• /
• 2011

Recent cross-country competition and Chinese steel industry because of the emerging steel industry in Korea is a very difficult situation. Therefore, the steel industry in order to overcome this difficult market environment, the quality, cost competitiveness, enhance customer service levels and enhance international competitiveness through is needed. In this study, the purpose of strengthening the competitiveness of steel companies in order and hit the recovery of raw materials have been developed to optimize the model, developed before and after the results were analyzed. In addition, when applied to other products in order to minimize risk and optimize cutting trial stage of development details of the model is presented in detail. Therefore, the developed model was applied to order the recovery of raw materials hits and significantly improved production planning time has been shortened dramatically. In the present study the contents of other products when properly applied and the competitiveness of companies to improve customer service levels are expected to be helpful.