• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.387-392
• /
• 2016

The antioxidant activities of brownish natural dyeing agents, extracted from seven kinds of plants, were tested. Total polyphenol content, DPPH and ABTS radical scavenging activities, and singlet oxygen quenching effect were determined for hot water extracts and floral waters of plants. DPPH and ABTS radical scavenging activites increased with increasing amounts of the extracts from Uncaria gambir R. and Terminalia chebula R. displayed remarkable scavenging effects at concentrations below 0.1 mg/mL, in comparison with the positive control, ascorbic acid. However, antioxidant effects of the floral water, obtained from steam distillation of tested plants, were inefficient at concentration below 0.2 mg/mL. In particular, the natural dyeing agent effectively suppressed singlet oxygen induced by photosensitizer in in vitro assay systems. The concentrations ($IC_{50}$) required to exert 50% of singlet oxygen were 120 and $190{\mu}g/mL$ for hot water extracts from Uncaria gambir R. and Phellinus linteus, respectively. Among all the tested samples, the Uncaria gambir R. and Phellinus linteus extracts contained higher amount of total phenolic contents. The results suggest that naturally occurring dyeing agents are beneficial as natural antioxidants, encouraging further extensive studies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.2
• /
• pp.135-142
• /
• 1996

Two experiments were conducted to investigate the utilization of various types of fish meal as dietary protein sources in Korean rockfish (Sebastes schlegeli). In the first experiment, averaging 5.7 g fish were divided into two groups and fed one of diets containing $55\%$ steam-dried white fish meal (SWFM) or $55\%$ brown fish meal (BFM) for 45 days. Weight gain and feed efficiency from fish fed SWFM were significantly (P<0.05) higher than those from fish fed BFM diet. However, daily feed intake, protein retention and lipid retention were not influenced by the two different diets. In the second experiment, averaging 86.6 g fish were divided into six groups and fed one of diets containing $56\%$ SWFM, $28\%\;SWFM+31\%$ flame-dried white fish meal (FWFM), $62\%\;FWFM,\;28\%\;SWFM+31\%\;BFM,\;56\%\;BFM$, or $28\%\;SWFM+29\%$ hydrolyzed fish protein (HFP) for 21 weeks. No significant differences were found among fish fed the six different diets in weight gain, feed efficiency, condition factor, whole body composition, and relative liver weight. Results of the present studies indicated that fish size should be considered in selecting feed ingredients and also feed cost could be lowered by replacing SWFM with FWFM or BFM in growing Korean rockfish diet.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.352-357
• /
• 2003

Volatile flavor compounds Angelica gigas Nakai and Angelica acutiloba Kitagawa were extracted by SDE (simultaneous steam distillation & extraction) using the mixture of n-pentane and diethylether (1:1, v/v) as an extract solvent and analyzed by GC-FID and GC-MS. The amount of essential oils of top part and root in Angelica gigas were obtained in 0.063% (v/w) and 0.389% (v/w) yields as a fresh weight base, respectively. The main compounds in top parts and the root were identified as nonane (7.51% and 24.49%, respectively), ${\alpha}-pinene$ (14.64% and 31.75%), limonene+${\beta}-phellandrene$ (14.01% and 9.66%), ${\gamma}-terpinene$ (7.85% and 1.20%), germacrene-d (5.85% and 0.22%), (E,E)-${\alpha}-farnesene$ (6.05% and 1.40%), ${\beta}-eudesmol$ (5.26% and 1.84%). Although these compounds were present in both parts. The results showed large differences in. the concentrations of them much varied. The amount of essential oils stem and leaf obtained (0.068% and 0.127% in A. gigas) and (0.153% and 0.243% in A. acutiloba) yields as a fresh weight base, respectively. More than 18 and 32 components in stem and leaf have been identified, which of main components in A. gigas were ${\alpha}-pinene$, myrcene, limonene, germacrene-d, eudesmol and butylphthalide, but germacrene-d and butylphthalide contents were also different in stem and leaf. And more than 21 and 32 components in A. acutiloba were ${\gamma}-terpinene$ and butylphthalide. Volatile compounds were very different in both species.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.647-654
• /
• 2001

Effects of final annealing temperature on the precipitate and oxidation were investigated for the Zr-lNb and Zr-lNb-lSn-0.3Fe alloys. The microstructure and oxidation of both alloys were evaluated for the optimization of final annealing process of these alloys in the annealing temperature regime of 450 to $800^{\circ}C$. The corrosion test was performed under steam at $400^{\circ}C$ for 270 days in a static autoclave. The oxide formed was identified by low angle X-ray diffraction method. The $\beta$-Zr was observed at annealing temperature above $600^{\circ}C$. Above $600^{\circ}C$, the precipitate area volume fraction of Zr-lNb and Zr-1Nb-lSn-0.3Fe alloys appeared to be increased with increasing the final annealing temperature. The corrosion resistance of Zr-lNb was higher than that of Zr- lNb-lSn-0.3Fe alloy. The corrosion rate of both alloys were accelerated due to the formation and growth of $\beta$-Zr with increasing the annealing temperature.

• Clean Technology
• /
• v.19 no.3
• /
• pp.333-341
• /
• 2013

This paper presents results on $CO_2$ gasification of 17 raw coals containing a wide range of volatile matter (21-57 wt%). The gasification is performed using a TGA under $CO_2$ and also under $N_2$ atmosphere. An amount of weight loss with increasing temperature is proportional to that of volatile matter in a coal under $N_2$ atmosphere. Reactivity of $CO_2$ gasification also increases with a content of volatile matter. However, the correlation is a little scattered. Oxygenated functional groups in a coal are generally reactive and therefore, an increase in O/C ratio leads to enhanced reactivity. However, $CO_2$ reactivity is affected by neither H/C ratio nor a content of ashes that possibly activate the gasification reaction. These findings are also applicable to steam coal gasification and the reactivity series are confirmed in the test at a fixed bed reactor.

• Corrosion Science and Technology
• /
• v.6 no.6
• /
• pp.316-321
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.700-705
• /
• 2012

$Prunus$ $mume$ was steamed for easier removal of the pulp. The steamed fruit pulp was vacuum dried and powdered. The steamed $Prunus$ $mume$ powder (SPP) was passed through a 250 ${\mu}m$ sieve, fluidized in a fluid-bed granulator, and then granulated by top-spraying with water (SPPGW) or the extract obtained from steam (SPPGE). Then the physicochemical and sensory properties of SPP, SPPGW, and SPPGE were evaluated. The flowability of powder (angle of repose $^{\circ}$) of SPP, SPPGW and SPPGE was $23.59^{\circ}$, $11.07^{\circ}$, and $13.94^{\circ}$, respectively. The water dispersibility of SPP, SPPGW, and SPPGE was 18.69, 10.04 and 6.00 sec, respectively. Also, the overall acceptance of SPP, SPPGW and SPPGE was 3.00, 3.44 and 6.56, respectively. In conclusion, SPPGE can be used as granular steamed whole fruit pulp with good powder flowability and dispersibility, and therefore consumer acceptance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.136-146
• /
• 1987

Flavor components were trapped by stimultaneous steam distillation-extraction method for investigating it in the bellflower roots and fractionated into four groups such as a neutral, a basic, a phenolic and an acidic fraction. An acidic fraction methylated with diazomethane solution and three others were analysed by GC and GC-MS equipping a fused silica capillary column, and S-containing compounds in these were detected with a flame photometric detector (FPD). The total of one hundred and three compounds from the bellflower roots were identified: they were 6 aliphatic hydrocarbons, 10 aromatic hydrocarbons, 2 terpene hydrocarbons, 12 alcohols, 8 terpene alcohols, 17 aldehydes, 3 terpene aldehydes, 5 ketones, 5 esters, 3 furans, 2 thiazoles, 2 lactones, 2 sulfides, 9 phenols, l2 carboxylic acids and 5 others. The greater part of the others except carboxylic acids were identified from a neutral fraction of which was assumed to be indispensable for the reproduction of bellflower root odor in a sensory evaluation. As a result of a sensory evaluation, 1-hexanal, trans-2-hexenal, 1-hexanol, cis-3-hexenol, trans-2-hexenol, 1-octen-3-ol and so forth identified in a neutral fraction were considered to be the key compounds of grass-like odor in the bellflower roots.

• Strategy21
• /
• s.41
• /
• pp.261-293
• /
• 2017

Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.47-52
• /
• 2013

In this study, the catalytic performance and characterization of $Ni/Ce_xZr_{1-x}O_2$ were investigated using an autothermal reforming (ATR) process for hydrogen production. The $Ni/Ce_xZr_{1-x}O_2$ catalysts were prepared using the following methods: the water method (CZ-W), urea water method (CZ-UW) and urea, water and ethanol method (CZ-UWA). The performance of $Ni/Ce_xZr_{1-x}O_2$ catalysts in autothermal reforming of propane for hydrogen production was studied in a fixed-bed flow reactor. Reaction tests were conducted by using a feed of $H_2O/C_3H_8/O_2$=3/1/0.37 and $300{\sim}700^{\circ}C$. The CZ-UW and CZ-UWA catalysts showed higher propane conversion and hydrogen yield than the CZ-W catalyst. The activity test confirmed that the improvement in the water-ethanol catalyst was due to the low level of carbon deposition. SEM showed that the surface carbon consisted of clusters on the used CZ-UW catalyst, which is incontrast to the nano-fiber morphology observed on the used CZ-UWA catalyst. It was found that the amount of carbon deposition depends on the preparation method. Especially the $Ni/Ce_{0.75}Zr_{0.25}O_2$ was showed higher propane conversion and hydrogen yield than the other catalysts. Also TGA showed that the resistance of carbon deposition increase to Co addition.