• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1987년도 제29회 수공학연구발표회논문초록집
• /
• pp.113-122
• /
• 1987

A numerical simulation technique of three-dimensional finite difference model is developed to study the groundwater flow system in Dcjima, an upland area which faces Kasumigaura Lake. For general perspectives of the groundwater flow system, a steady state three-dimentional model is simulated. For the sedimentary mud formations which are found in the representative formation, three situations of hydraulic conductivity are considered, representing an isotropic condition and situations where the horizontal permeability is equal to 10 times and 100times of the vertical one. The finite difference grid used in the simulation has 60x50x30=90,000 nodes. A converged solution with a tolerance of 0.001 meter of hydraulic head is set. Having determined the flow net by using a steady state three-dimensional model. the results for the three cases of hydraulic conductivity are compared with the results of tracer methods (Bae and Kayane 1987) With the aid of four representative vertical cross-sections, groundwater flow systems in the study area are assumed. Water balances for the three cases indicate very good agreement between total recharge and discharge in each case Analyses of groundwater flow system based on the tritium concentrations and water quality measurements (Bae and Kayane 1987) are confirmed by the numerical simulation and the results obtained by these two methods appeared to be in close agreement.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.764-769
• /
• 2022

The United Arab Emirates is currently building and operating four units of the APR-1400 developed by a South Korean vendor, Korea Electric Power Corporation (KEPCO). This paper attempts to perform APR-1400 reactor core analysis by using the well-known two-step method. The two-step method was applied to the APR-1400 first cycle using the open-source nodal diffusion code, KOMODO. In this study, the group constants were generated using CASMO-4 fuel transport lattice code. The simulation was performed in Hot Zero Power (HZP) at steady-state and transient conditions. Some typical parameters necessary for the Nuclear Design Report (NDR) were evaluated in this paper, such as effective neutron multiplication factor, control rod worth, and critical boron concentration for steady-state analysis. Other parameters such as reactivity insertion, power, and fuel temperature changes during the Reactivity Insertion Accident (RIA) simulation were evaluated as well. The results from KOMODO were verified using PARCS and SIMULATE-3 nodal core simulators. It was found that KOMODO gives an excellent agreement.

• 정보처리학회논문지D
• /
• 제10D권6호
• /
• pp.1025-1032
• /
• 2003

백분위수는 시뮬레이션 결과의 전체적인 성향을 파악하는데 아주 유용한 측정 기법 중의 하나이다. 그러나, 시뮬레이션으로 수집된 데이터들에 대한 평균이나 표준편차와는 달리 백분위수를 추정하기 위해서는 모든 관측된 데이터들을 저장해야 만 한다, 왜냐하면 백분위수의 추정을 위해서는 관측된 모든 데이를 분류하여 오른차순으로 정렬하는 등 여러 단계의 처리과정이 필요하기 때문이다. 따라서, 백분위수 추정을 위해서는 관측된 모든 데이터를 저장하기 위한 대용량의 저장장치와 정렬을 위한 계산시간 (O($nlog_{2}n$))이 요구된다. 이러한 문제점을 해결하기 위한 여러 백분위수 추정 기법들이 제안되었으나 고정된 샘플 크기의 시뮬레이선(fixed sample size simulation) 을 수행할 경우에만 적용 가능하다. [11, 12, 21]. 본 논문에서는 3가지 백분위수 추정 기법(linear PE, batching PE, spectral $P^2$ PE) 을 순차적인 안정상태 시뮬레이션(sequential steady-state simulation) 에 적용하여 연구하였다. 또한, 3가지의 백분위수 추정 기법들에 대해 coverage 분석을 수행한 결과를 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.781-789
• /
• 2016

Busbar has been used as electric conductor within extra high voltage (EHV) gas insulated switchgear (GIS), which makes EHV GIS higher security, smaller size and lower cost. However, the main fault of GIS is overheating of busbar connection parts, circuit breaker and isolating switch contact parts, which has been already restricting development of GIS to a large extent. In this study, a coupled magneto-flow-thermal analysis is used to investigate the thermal properties of GIS busbar in steady-state. A three-dimensional (3-D) finite element model (FEM) is built to calculate multiphysics fields including electromagnetic field, flow field and thermal field in steady-state. The influences of current on the magnetic flux density, flow velocity and heat distribution has been investigated. Temperature differences of inner wall and outer wall are investigated for busbar tank and conducting rod. Considering the end effect in the busbar, temperature rise difference is compared between end sections and the middle section. In order to obtain better heat dissipation effect, diameters of conductor and tank are optimized based on temperature rise simulation results. Temperature rise tests have been done to validate the 3-D simulation model, which is observed a good correlation with the simulation results. This study provides technical support for optimized structure of the EHV GIS busbar.

• 정보처리학회논문지A
• /
• 제9A권4호
• /
• pp.519-524
• /
• 2002

본 논문에서는 분산 시뮬레이션 기법 중에 하나인 MRIP(Multiple Replications In Parallel) 시나리오에서 각종 순차적인 시뮬레이션 분석 방법들의 성능을 측정할 수 있는 포함범위(Coverage)에 대한 신뢰구간(confidence intervals) 및 속도향상(Speedup)에 대해 살펴보았다. F-분포를 기반으로 한 신뢰구간에 대한 추정기(estimator)를 단일 프로세서와 다중 프로세서 상에서 참조모델(reference model)로 $M/M/1/{\infty},\;M/D/I/{\infty}과\;M/H_{2}/1/{\infty}$큐잉 시스템을 활용하여 정상상태(steady-state)에서의 평균치를 추정하는 시뮬레이션에 적용하였다. 순차적인 포함범위 분석을 위해서는 수많은 시뮬레이션 실행(Run)들이 요구되는데, MRIP 분산 시뮬레이션 시나리오에서 다중 프로세서를 이용하여 시뮬레이션을 수행하여 최종 시뮬레이션 결과를 얻는데 걸리는 신간을 감소시켰다. 또한, LNA으로 연결된 분산 컴퓨팅 시스템에 시뮬레이션을 동시에 수행시킴으로써 쉽게 필요한 수의 시뮬레이션 실행결과(Run)를 수집할 수 있다. 이는 샘플의 수가 증가됨으로써 좀더 신뢰도가 높은 최종 신뢰구간을 시뮬레이션 수행자가 얻을 수 있게 해준다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.50-58
• /
• 2016

한국형 발사체(KSLV-II) 추진제 공급시스템은 각 단에 위치한 추진제 탱크에 산화제와 케로신을 공급해주는 시스템이다. 발사체의 추진제 탱크를 안정적으로 충전하기 위해, 충전시나리오와 충전유량을 결정하였다. 다음으로 1D 유동 해석프로그램을 이용하여 추진제 공급시스템을 모델링 하였다. 1D steady state 해석을 통하여 각 시스템에서의 충전모드에 따른 밸브용량과 orifice 사이즈를 계산하였다. Steady state 결과를 이용하여 1D transient 해석을 수행하였다. 해석 결과 추진제가 각 추진제 탱크로 충전됨에 따라 탱크의 수두가 상승하여 충전유량이 감소하는 것으로 나타났다. 최종적으로 해석을 통해 제안된 충전시스템 모델이 요구되는 충전설계조건을 만족하는 것을 확인하였다.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.71-76
• /
• 2008

Nonlinear dynamic system under random excitation was analyzed by using stochastic method. A linearization method was used in order to linearize non-linear structural characteristics but the parametric excitation was used as it was given. An equivalent energy method which equalizes the expectation value of energy of the original nonlinear system and that of quasi-linearized system was proposed. Ito's differential rule was applied to obtain steady state moments. Quasi-linearization coefficients can be obtained the iterative calculation of linearization scheme and steady state moments. Monte Carlo simulation was used to verify the results of the proposed method. Nonlinear vibration of a slender beam was analyzed in this research. The analysis results were compared with Monte Carlo simulation result and showed good agreement. As the spectral density of the given excitation increased, the analysis results showed the better agreement with Monte Carlo simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.181-189
• /
• 1998

A general steady-state model for simulation on domastic refrigerator has been developed. The system model consists of various standard components such as evaporator compressor condenser capillary tube and cabinet. Cabinet is not system component but influence characteristic on domastic refrigerator. The purpose of this paper is to compare between characteristics of HFC 134a with CFC 12 in the domastic refrigerator and to predict the steady state cycle performance which is various specifications of cycle components under the continuous running conditions. As the results of simulation the coefficient of performance of both condenser and evaporator increases with increasing UA the increasing rate for condenser is greater than for evaporator.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.35-43
• /
• 2015

A numerical simulation on the wake flow of a wind turbine which is a scaled version of a multi-megawatt wind turbine has been performed. Two different inlet conditions of averaged wind speed including one below and one above the rated wind speed were used in the simulation. Steady-state pitch angles of the blade associated with the two averaged wind speeds were imposed for the simulation. The steady state analysis based on the Reynolds averaged Navier-Stokes equations with the method of frame motion were used for the simulation to find the torque of the rotor and the wake field behind the wind turbine. The simulation results were compared with the results obtained from the wind tunnel testing. From comparisons, it was found that the simulation results on the turbine power are pretty close to the experimental values. Also, the wake results were relatively close to the experimental results but there existed some discrepancy in the shape of velocity deficit. The reason for the discrepancy is considered due to the steady state solution with the frame motion method used in the simulation. However, the method is considered useful for solutions with much reduced calculation time and reasonably good accuracy compared to the transient analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.276-279
• /
• 2001

Direct torque control(DTC) is known to produce quick response in ac drives. Some drawbacks of the classical DTC are the relatively large torque ripple in a low speed range and notable current pulsation during steady state. They are reflected speed response and increased acoustical noise. In this paper, The DTC quick response are preserved at transient state, while better qualify steady state performance is produced by Space Vector Modulation(SVM). It is able to reduce the acoustical noise, torque ripple and current pulsation during steady state. The system presented are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal. Simulation results for the 2.2kw general purposed induction motor are presented and discussed.