• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.284-287
• /
• 2001

In the System-integrated modular advanced reactor(SMART), the motor for Control element drive mechanism(CEDM) requires high density power and simple drive mechanism to reduce volume because of restriction by install-space and must satisfy the reactor operating circumstances with high pressure and temperature. To Maximize the characteristics of the TFM, we chose the asymmetric bridge converter as the driving system for TFM. Because two switching devices are connected in series with the stator winding of each phases in the asymmetric bridge converter all the phases are not affected by another phase but controlled independently. Also, this converter has many advantages that the various control methods can be adopted, it is easy to control, and that in case that the switching devices of a phase are damaged, the affects can be minimized.

• 전기의세계
• /
• v.28 no.1
• /
• pp.59-66
• /
• 1979

The linearized models on per for mance dynamics of the pulse motor have been already proposed by many others. These models exhibit certain advantages of their own because of their simple formulation, but in many cases the models are proved to be inadequate for further accurate analysis of the motor dynamics, owing to impractical and rather rough assumptions in the derivation. In this study a dynamic state transition model is induced, using the equivalent circuit obtained from the operating principle of the variable reluctance pulse motor which turns out to be nonlinear equation. This nonlinear dynamic state equation is numerically analysed by the use of UNIVAC System/3(OS/3) digital computer at hand. In the course of the dynamic analysis of the performance characteristics of a testing motor, dependance of the inertia of rotor and load, the coefficient of viscous friction between rotor and housing, and the winding resistance of the stator is discussed and a comparative study of the machine constants is carried on as related to the design problem of the motor.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1046-1048
• /
• 2004

Inductance is an important parameter determining the characteristics of current waveform in electric motors. There are many kinds of inductances, however, self and mutual inductances are the major components. These inductances are changed under the variation of the magnetic circuit, current, frequency etc., even in the same winding distribution. Therefore this paper deals with the characteristics of inductance according to the shape of stator tooth. The analysis model is newly developed motor made of SMC(Soft Magnetic Composite) to reduce the core loss in high speed. the result of this paper gives the basic understandings of inductance to extend the applications of the motors.

• Journal of Power Electronics
• /
• v.6 no.3
• /
• pp.245-252
• /
• 2006

This paper presents a method based on neural networks to detect the broken rotor bars and end rings of squirrel cage induction motors. At first, detection methods are studied, and then traditional methods of fault detection and dynamic models of induction motors by using winding function model are introduced. In this method, all of the stator slots and rotor bars are considered, thus the performance of the motor in healthy situations or breakage in each part can be checked. The frequency spectrum of current signals is derived by using Fourier transformation and is analyzed in different conditions. In continuation, an analytical discussion and a simple algorithm are presented to detect the fault. This algorithm is based on neural networks. The neural network has been trained by using information of a 1.1 KW induction motor. This system has been tested with a different amount of load torque, and it is capable of working on-line and of recognizing all normal and ill conditions.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.783-785
• /
• 2003

This test was performed to assess the insulation deterioration condition of the stator winding of 3.3kV class induction motors which have been in service for 15 years after being installed in 1988. The insulation diagnostic tests include resistance, polarization index(P.I). dissipation factor(${\Delta}tan{\delta}$) and maximum partial discharges(Qmax). The results of diagnostic tests were compared to the visual inspection in overhaul.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1894-1896
• /
• 2003

In this paper, a novel monitoring system, data acquisition & diagnosis unit (DADU), for high-voltage rotating machines is proposed. This system monitors the insulation condition, current, voltage, vibration, and temperature of the stator winding by on-line measurements of partial discharge (PD), flux, etc. This helps more efficient operation and maintenance of the rotating machines.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.837-839
• /
• 2003

A lot of slot openings which are the rest of winding in stator slot can be applied by wedges made of magnetically anisotropic material in order to lead magnetic flux into rotor in rotating machines. In this paper, high efficiency single-phase induction motor was analyzed with a 2-dimensional finite element method by using magnetic wedges for improvement of efficiency.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2070-2072
• /
• 2003

본 연구는 3상 소형 유도전동기의 고정자 권선 고장의 효과적인 진단을 위하여 고정자 전류에 대하여 Park's Vector를 이용한 기법을 적용하였다. 본 기법은 고정자 3상 전류를 측정하여 Park's vector 변환을 통하여 직축, 횡축 전류로 변환하고 이를 이용하여 고장 진단을 위한 Park's Vector Pattern을 통하여 고장진단을 수행하였다. 제안한 방법의 유용성을 확인하기 위하여 고정자 권선 한 상에 2턴, 10턴, 그리고 20턴의 단락고장을 발생시켜 정격부하의 25%, 50%, 100%에 대하여 부하변동에 따른 각각의 단락고장의 경우와 정상 전동기의 Park's Vector Pattern 비교하였으며 그 유용성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.32-35
• /
• 1996

This paper analyzes characteristics of PMLSM using 3 dimensional equivalent magnetic circuit network method (3-D EMC). PMLSM of which the effective electric-airgap is not only very large, but also the width is finite width lateral edges has much leakage flux. Therefore, 2-D analysis method cannot consider it so carefully that 3-D analysis method must required. 3-D EMC which will be used for analysis of PMLSM performs modeling of it including solt and teeth structure, uses the magnetic motive force of stator winding and permanent magnet as source. and calculates magnetic flux density and force considering nonlinear characteristics of materials. we verified analysis validity by comparing simulation results with expermental results.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2115-2117
• /
• 2005

회전기기인 고압 전동기 및 발전기의 고정자권선에서 나타나는 운전중 부분방전 진단을 위한 방법의 하나로 비접촉식 센서를 이용한 부분방전 측정에 관한 연구가 최근 들어 활발히 진행되고 있다. 그러나 이들 권선에서 나타나는 부분방전의 방사특성에 대하여 정확한 측정이 국내에서 체계적으로 검토된 실적이 없는 실정이다. 본 논문에서는 회전기 고정자권선의 부분방전 현상을 측정하는데 이용될 비접촉식 부분방전 진단센서를 개발함에 있어서 필요한 측정 주파수대역을 선정하는데 이용하고자, 여러 종류의 고정자 권선을 대상으로 전압을 인가하여 발생되는 부분방전의 펄스의 방사특성 및 잡음특성을 실험실적으로 측정하여 고찰하였다.