• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.780-786
• /
• 2007

Statement of problem. The performance and maintenance of implant-supported prostheses are primarily dependent upon load transmission both at the bone-to-implant interface and within the implant-abutment-prosthesis complex. The design of the interface between components has been shown to have a profound influence on the stability of screw joints. Purpose. The Purpose of this study was to compare the strength and the fatigue resistance of 1-piece and 2-piece abutment connected to oral implant, utilizing an internal conical interface. Material and methods. Twenty $Implatium^{(R)}$ tapered implants were embedded to the top of the fixture in acrylic resin blocks. Ten $Combi^{(R)}$(1-piece) and $Dual^{(R)}$(2-piece) abutments of the same dimension were assembled to the implant, respectively. The assembled units were mounted in a testing machine. A load was applied perpendicular to the long axis of the assemblies and the loading points was at the distance of 7mm from the block surface. Half of 1-piece and 2-piece abutment-implant units were tested for the evaluation of the bending strength, and the others were cyclically loaded for the evaluation of the fatigue resistance until plastic deformation occurred. Nonparametric statistical analysis was performed for the results. Results. Mean plastic and maximum bending moment were $1,900{\pm}18Nmm,\;3,609{\pm}106Nmm$ for the 1-piece abutment, and $1,250{\pm}31Nmm,\;2,688{\pm}166Nmm$ for the 2-piece abutment, respectively. Mean cycles and standard deviation when implant-abutment joint showed a first plastic deformation were $238,610{\pm}44,891$. cycles for the 1-piece abutment and $9,476{\pm}3,541$ cycles for the 2-piece abutment. A 1-piece abutment showed significantly higher value than a 2-piece abutment in the first plastic bending moment (p<.05), maximum bending moment (p<.05) and fatigue strength (p<.05). Conclusion. Both 1-piece and 2-piece conical abutment had high strength and fatigue resistance and this suggests long-term durability without mechanical complication. However, the 1-piece conical abutment was more stable than the 2-piece conical abutment in the strength and the fatigue resistance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.4
• /
• pp.121-131
• /
• 2017

The most important points in the field of entrepreneurship research are new venture creation and behaviors for start-up venture. Most of past researches are limited to the formation of entrepreneurial intention, and researches on entrepreneurial activities, specifically nascent entrepreneurial behavior, have not been studied well. In this study, we view entrepreneurial process as gestation process from entrepreneurial intention to nascent entrepreneurial activities, and identify the moderating effects of cognitive style, which is the way of thinking about the information in entrepreneurial process. In addition, we find the moderating effects of cognitive style on the relationships between perceived barriers and support in environmental factors and nascent entrepreneurial activities. Subjects of this study are potential entrepreneurs. So we selected university students who are taking venture start-up course, conducted a survey, collected 367 questionnaires. In statistical test, we applied PLS-SEM for testing hypotheses because CB-SEM is too sensitive to test more than two moderating effects in th research model. As a result of the analysis, it was found that entrepreneurial intention, cognitive planning style, cognitive creative style, perceived support had a significant effect on nascent entrepreneurial behavior. The results of the analysis of the moderating effects of cognitive style which are the hypotheses in the research are as follows. First, the cognitive planning style did not have a significant moderating effect on the relationship between entrepreneurial intention and nascent entrepreneurial activities. Second, in the relationship between perceived barriers and nascent entrepreneurial activity, cognitive planning style did not have significant moderating effect, and cognitive creating style had significant negative moderating effect. Third, in the relationship between perceive support and nascent entrepreneurial activity, cognitive planning style had significant positive moderating effect, and cognitive creating style did not have significant moderating effect.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.93-100
• /
• 2014

The objective of this study is to propose the measurement system implementation method for the evaluation and measurement of the indoor-impulsive over 170 dB noise source. For the purpose of measuring impulse noise, design and implementation constructed followed subsystems of the testing center, microphone, ear simulator, head and torso simulator and so on. Measurement systems for the accuracy and reliability of impulse noise are implemented when measuring 3 ways of measurements method by the simultaneous measurement system design. For the accuracy and reliability of three mutually indoor-impulse noise measurements were compared, three kinds of measuring methods in accordance with the peak sound pressure level and octave band. Comparing the results of data, the indoor-impulse noise by analyzing a frequency characteristic was validated in difference for the statistical significance. Result are determined by the influence of the reflected wave. Therefore, the flexible size of the interior test site while interior impulse noise measurement system was constructed. Throughout this system can be affected by parameters that are the impulse noise source and the corresponding frequency-characteristic analysis to determine the spectrum of the reflected wave. And, in the near future, indoor impulse noise measurement systems for acquisition and analysis are utilized in useful data.

• Korean Journal of Hospice Care
• /
• v.5 no.1
• /
• pp.74-81
• /
• 2005

Purpose: The purpose of this study is to help apply spiritual care in clinics by testing whether spiritual support like prayer and praise, which is appled on a patient who has been cared for by Facility Hospice can have an effect on their physical pain, emotional anxietv, loneliness and well being. Method: This research was done on a subject patient who had been hospitalized in Saemmul from Jan, 2002 to June, 2003, and who could easily communicate. Questionnaire of quality of life, they had this test from the date of admission into the hospital 1week, 3week, 5week later. The Target was 182 people for the hospital data, 124 people after one week, 84 people after 3 weeks and 54 people after for 5 weeks later. For statistics, SPSS for Window(SPSS inc. ver.10), student T-test and one way ANOVA were used. The interrelation between pray and pain was analyzed by the "Pearson correlation". In case where the P-value was below 0.05, we concluded it had statistical-value. Results: When we compared both the party which had a low degree of peace by prayer and praise and the B party which had the highest degree, B party had an increasing tendency for less anxiety and loneliness and more well-being. Each of the data 0, 1, 3 and 5 week showed visible difference between both parties. Conclusion: First, in case that a late cancer patient is hospitalized, the difference for tranquility and pain control by prayer and praise is not noticeable. While, 1 and 3 weeks later, the difference is visible, so we concluded the relationship between the cancer patient's spiritual tranquility and physical pain are closely related with each other. Also the patients who are in spiritual peace by prayer and praise can control the pain better than the other patients. Second, because the patient who can feel calm from the data of being admitted into the hospital is mentally calm, both party's difference is noticeable in each period of the 1, 3 and 5th week. Compared with other patients, the object patients who have spiritual tranquility will have less anxiety and loneliness and more tranquility.

• International Commerce and Information Review
• /
• v.15 no.1
• /
• pp.161-183
• /
• 2013

The essential purpose of this study is to exemplify empirically some relations of between Korea image attributes and Korea image making in Uzbekistan. This study is for providing basically empirical analysis for intensifying Korea's economic capacity based on Korean image in Uzbekistan and for offering any kinds of implications for the entry and management activities of Korean enterprises in world-wide business. This study is organized in two stages. First, the study model is designed by reappraising relevant theories, previous studies and the current investment qualifications concerning the country image attributes and image making. Second, the survey of Uzbekistan people who are living in South Korea is accomplished by collecting questionnaires. SPSS 15.0 for windows is being activated for correlation, reliability, validity and finally the statistical method of structural equation modeling is utilized to testing the hypothesis by AMOS 7.0 for windows. In conclusion partially, Korea image attributes: economic capability, popular culture, national traits and enterprise competence are proved to influence positively to Korea image making: recognition, attractiveness and confidence which is considered generally by Uzbekistan people.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.475-481
• /
• 2000

The purpose of this study was to evaluate the effect of oral environment on the strength of resin bracket wings by comparing fracture mode according to water immersion and thermocycling. Seventy-five resin brackets(Spirit MB, Ormco, California) were divided into three groups and treated for six months as follows; (1) untreated, (2) water immersion in distilled water at $37^{\circ}C$, (3) water immersion in distilled water at $37^{\circ}C$ with total 2,100 times of thermocycling taken 350 times each month. Fracture mode of the wing was tested on universal testing machine. In addition to resin brackets, 25 metal brackets were used as controls. Through the statistical analyses, following results were obtained. 1. Resin bracket wings showed significantly lower fracture strength than metal brackets(p<0.001). 2. Water immersion and water immersion with thermocycling groups showed significantly lower fracture strength than open air condition group(p<0.001). 3. Water immersion with thermocycling group showed significantly lower fracture strength than water immersion group(p<0.001). The above results suggest that the mechanical property of resin bracket wing nay be influenced by oral environment and further research is needed to improve the strength of the wing in the resin bracket.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.319-324
• /
• 2003

Statement of problem. Adhesives in dentistry playa major role in the success of restorative treatments. In the treatment of all ceramic restoration it is needed to find the adequate bond strength between enamel and dentin. Purpose. The purpose of this study was to evaluate shear bond strength of resin cement bonded to extracted human uncut enamel, cut enamel, and dentin in vitro. Material and methods. Ten freshly extracted anterior teeth without any previous restorative treatments were chosen. The extracted teeth were embedded in PMMA cold acrylic in the shape of a cylinder, 25 mm in diameter by 25 mm in height. The bonding system used was as follow: Uni-Etch (32% phosphoric acid), One-Step adhesive, Duolink resin cement. The specimens were acid etched and rinsed with water. Two layers of One-Step adhesive were coated with a disposable brush on the uncut enamel. VIP curing light at $500mV/cm^2$ was used to cure the adhesive. For cut enamel shear bond test, the specimen used for uncut enamel was further reduced approximately $0.3{\sim}0.5mm$ using a laminate preparation diamond bur (0.3 mm in depth). The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit SiC paper and cleaned with distilled water. The bonding procedure on the cut enamel was same as uncut enamel bonding procedure. For dentin bonding test, the specimen used for cut enamel was further reduced approximately $0.5mm{\sim}1.0mm$ using a laminate preparation diamond bur (0.5 mm in depth of diamond cutting). The amount of reduction was evaluated with the silicone mold. The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit silicon carbon paper and cleaned in distilled water. The bonding procedure on the dentin was same as uncut enamel bonding procedure. All samples were mounted and secured on the Ultradent shear bond test sample holder, and Ultradent restricted shear bond testing device was used with Universal Instron machine until fracture. Analysis of variance (ANOVA) test was performed comparing the result at P<0.05. Multiple comparison (Tukey) was used to compare each groups. Result. The result showed that the mean value in shear bond strength of resin cement bonded to uncut enamel, cut enamel and dentin were 27.04 Mpa, 30.25 Mpa and 26.39 Mpa with respect. Conclusion. Within the limitation of this study, the mean value of the shear bond strength of cut enamel was higher than those of uncut enamel or dentin. However there existed no statistical differences between three different human dentition substrates due to increased adhesive characteristics.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.168-175
• /
• 2020

Purpose: The purpose is to test and evaluate the physical properties of commonly used temporary restoration materials and newly emerged materials. Materials and Methods: Four groups of polymer materials were evaluated: Polymethyl methacrylate (PMMA) 2 groups, Polyetheretherketone (PEEK), Polycarbonate. Four physical properties were tested: surface hardness, bending strength, abrasion resistance during wear, wear behavior. The 3-axis bending strength and Vickers hardness test were measured using a universal testing machines respectively. The microstructure was observed with a scanning electron microscope and weight comparison was evaluated after 100,000 chewing tests using a chewing simulator. Kruskal wallis test was performed to evaluate statistical significance. Results: The four groups showed the highest flexural strength and Vickers hardness of PEEK, followed by PC, PMMA-H, PMMA-T. Microstructure observation also showed the least surface roughness in the PEEK group, followed by PC, PMMA-H, PMMA-T. Conclusion: PC is considered to have sufficient mechanical properties that can be applied to the manufacture of temporary teeth. However, further studies, such as biocompatibility, are considered to be necessary for practical clinical applications.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.527-539
• /
• 2014

This study establishes the research model and sets up the hypothesis in order to analyze the effect of the type of mixed manning and the ratio of foreign crew on the group cohesiveness, job satisfaction and organizational commitment in ship organizations and the moderating effect of the acceptance and adaptation of cross-culture. For statistical hypothesis testing, it conducts a questionnaire survey targeting mixed manning ships and examines empirically the inter-variables relation through the regression. The result of empirical research is that the group cohesiveness, job satisfaction and organizational commitment in the ship organization of Korean master(chief engineer) and foreign officers is higher than that of Korean master and officers. Moreover, it is found that the group cohesiveness of 31~50% foreign crew group is less than that of the others. However, There is no moderating effects of the acceptance and adaptation of cross-culture. Additionally, it demonstrates the higher job satisfaction and organizational commitment in the stronger cohesiveness groups. The finding suggests the rationale that shipping and ship management companies could raise the group cohesiveness, job satisfaction and organizational commitment by moderating the type of mixed manning and the ratio of foreign crew.

• Science of Emotion and Sensibility
• /
• v.12 no.2
• /
• pp.181-192
• /
• 2009

The purpose of this study was to explain the attitudes and acceptance toward the smart clothing adopted by the TAM(Technology Acceptance Model). A theoretical model on consumer acceptance of the commercialized smart clothing was constructed on the basis of previous studies and a review of literature and tested the path analysis. For the data analysis, statistical methods of confirmatory factor analysis, correlation, and covariance structural analysis using AMOS 5.0 package were employed. The results from a web-based survey of 557 online consumers indicate that the TAM by Davis(1989) adopted by perceived value according to market price was able to explain consumer acceptance of smart clothing substantially well. Using structural equation modeling, eight of the six hypotheses investigated in this study were supported. The results of the testing of the hypothesis were as fellows: First, perceived ease of use had a side effect on attitude through perceived usefulness. In addition, the attitude was found to affect consumer acceptance. Second, perceived usefulness was found to affect consumer attitude on perceived value, however, had not significant effect on consumer acceptance toward smart clothing. Third, perceived value was found to affect both consumer acceptance and attitude toward smart clothing. Finally, the attitude toward smart clothing had a direct effect on the consumer acceptance.