The geological information analysis based on spatial statistical techniques have been studied in relation to mineral exploration. The applicability of outlier detection using moving-window statistics and directional cross-variography analysis have been verified by using geochemical data sets surveyed in the Taebaek area for mineral exploration. The directional variogram analysis has been basically known as a geostatistical method for spatial continuity measures. In this study, the application of this proposed method was extended to measure spatial correlation or similarity problems between two geochemical elements. For the appraisal of the usefulness of this scheme, five kinds of variogram functions were computed for original data and revised data, obtained by removing outliers detected by moving-window statistics and the results were compared. It is concluded that these advanced spatial statistical methods at the interpretation stage of spatial similarity provide us with valuable quantitative results as decision-supporting information for regional mineral exploration task.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.41
no.3
/
pp.133-138
/
2015
Objectives: To evaluate the influence of the type of osteotomy in the inferior aspect of the mandible on the mechanical performance. Materials and Methods: The study was performed on 20 polyurethane hemimandibles. A sagittal split ramus osteotomy (SSRO) was designed in 10 hemimandibles (group 1) with a vertical osteotomy in the buccal side (second molar level) and final osteotomy was performed horizontally on the lingual aspect, while the mandible body osteotomy was finalized as a straight osteotomy in the basilar area, perpendicular to the body. For group 2, the same osteotomy technique was used, but an oblique osteotomy was done in the basilar aspect of the mandibular body, forming continuity with the sagittal cut in the basilar area. Using a surgical guide, osteosynthesis was performed with bicortical screws using an inverted L scheme. In both groups vertical compression tests were performed with a linear load of 1 mm/min on the central fossa of the first molar and tests were done with models made from photoelastic resin. Data were analyzed using Student's t-test, establishing a statistical significance when P<0.05. Results: A statistical difference was not observed in the maximum displacements obtained in the two osteotomies (P<0.05). In the extensiometric analysis, statistically significant differences were identified only in the middle screw of the fixation. The photoelastic resin models showed force dissipation towards the inferior aspect of the mandible in both SSRO models. Conclusion: We found that osteotomy of the inferior aspect did not influence the mechanical performance for osteosynthesis with an inverted L system.
Journal of Korean Society of Industrial and Systems Engineering
/
v.45
no.4
/
pp.199-209
/
2022
As the uncertainty of technology development and market needs increases due to changes in the global business environment, the interest and demand for R&D activities of individual companies are increasing. To respond to these environmental changes, technology commercialization players are paying great attention to enhancing the qualitative competitiveness of R&D. In particular, R&D companies in the marine and fishery sector face many difficulties compared to other industries. For example, the R&D environment is barren, it is challenging to secure R&D human resources, and it is facing a somewhat more difficult environment compared to other sectors, such as the difficulty in maintaining R&D continuity due to the turnover rate of researchers. In this study, based on the empirical data and patent status of private companies closely related to the R&D technology status, big data analysis, and simulation analysis methods were used to identify the relative position of individual companies' R&D capabilities and industrial perspectives. In this study, based on industrial evidence and patent applications closely related to the R&D technology status, the R&D capabilities of individual companies were evaluated using extensive data analysis and simulation analysis methods, and a statistical test was performed to analyze if there were differences in capabilities from an industrial point of view. At this time, the industries to be analyzed were based on all sectors, the maritime industry, the fisheries industry, and the maritime industry integration sector. In conclusion, it was analyzed that there was a certain level of difference in the R&D capabilities of individual companies in each industry sector, Therefore when developing a future R&D capability system, it was confirmed that it was necessary to separate the population for each industry and establish a strategy.
The GOSAT (Greenhouse gases Observing SATellite) data provide new opportunities the most regionally complete and up-to-date assessment of $CO_2$. However, in practice, GOSAT records often suffer from missing data values mainly due to unfavorable meteorological condition in specific time periods of data acquisition. The aim of this research was to identify optimal spatial interpolation techniques to ensure the continuity of $CO_2$ from samples taken in the North East Asia. The accuracy among ordinary kriging (OK), universal kriging (UK) and simple kriging (SK) was compared based on the combined consideration of $R^2$ values, Root Mean Square Error (RMSE), Mean Error (ME) for variogram models. Cross validation for 1312 random sampling points indicate that the (UK) kriging is the best geostatistical method for spatial predictions of $CO_2$ in the East Asia region. The results from this study can be useful for selecting optimal kriging algorithm to produce $CO_2$ map of various landscapes. Also, data users may benefit from a statistical approach that would allow them to better understand the uncertainty and limitations of the GOSAT sample data.
Purpose: The purpose of this study was to analyze dental technicians' job stress and Job satisfaction level and to examine its correlation. Methods: A self-administered survey was conducted from September 2 to October 2, 2019, on 230 selected dental technicians. The collected data were statistical data on frequency and percentage were obtained, and t-test, one-way ANOVA, correlation analysis and regression analysis were carried out. Results: When the job stress was analyzed, there were significant differences according to their field of work, working hours(p<.05). Their average score in the items about a job stress was 3.57. As a result of analyzing the job satisfaction of the dental technicians, there were significant differences according to their working hours, plan for task continuity in dental technician(p<.05). The average score in job satisfaction items was 3.11. Conclusion: As a result of research, that as for the correlation between a job stress and job satisfaction, a higher the job stress led to lower the job satisfaction, as every variable had a significant reverse correlation with each other. In addition, physical environment, heavy workload, conflict during the work performance, personal matters were identified as the factor that exerted the influence on both of job satisfaction.
Objectives: Spatial analysis is useful for understanding complicated causal relationships. This paper focuses trends and appling methods for spatial analysis associated with environmental asbestos exposure. Methods: Literature review and reflection of experience of authors were conducted to know academic background of spatial analysis, appling methods on epidemiology and asbestos exposure. Results: Spatial analysis based on spatial autocorrelation provides a variety of methods through which to conduct mapping, cluster analysis, diffusion, interpolation, and identification. Cause of disease occurrence can be investigated through spatial analysis. Appropriate methods can be applied according to contagiousness and continuity. Spatial analysis for asbestos exposure source is needed to study asbestos related diseases. Although a great amount of research has used spatial analysis to study exposure assessment and distribution of disease occurrence, these studies tend to focus on the construction of a thematic map without different forms of analysis. Recently, spatial analysis has been advanced by merging with web tools, mobile computing, statistical packages, social network analysis, and big data. Conclusions: Because the trend in spatial analysis has evolved from simple marking into a variety of forms of analyses, environmental researchers including asbestos exposure study are required to be aware of recent trends.
Proceedings of the Korean Institute Of Construction Engineering and Management
/
autumn
/
pp.311-314
/
2003
This study takes a statistical approach to quantify tile impact of wort stopped on the following day's site productivity. Therefore, this study is aimed to verify this null hypothesis: 'A work stopped in a construction field does not impact on the following day's productivity and productivity achievement ratio'. For the purpose, work, stopped is presumed as a dummy variable impacting site productivity in multiple linear regression analysis. Moreover, the quantified impact of work slopped on productivity achievement ratio is identified based on this study. This study shows that construction managers should persevere in their efforts to secure the work continuity in order to improve site productivity and productivity achievement ratio.
Journal of the Korean Institute of Landscape Architecture
/
v.25
no.3
/
pp.234-245
/
1997
This study aims to clarify the preference of the hedge, on focusing the height, density, width of the hedge, which gives limited dwelling space continuity with outer space, promotes the naturality to dwelling environment, and plays an important role as green space in city. For this, it is performed statistical analysis by field survey, by classifying the hedge as planting pattern, and synthesizing the photograph. Therefore, the results of this study are as follows : 1. In the preference of height of the hedge, when only the hedge is composed, 1.5M is preferred, and when the hedge with deciduous tree, with needle-leaf tree, 1.25M is preferred. 2. In the preference of density of the hedge, which are perfect density, in case of the hedge, which are almost density, in case of the needle-leaf tree, are preferred. 3. In the preference of width of the hedge, 0.4M is preferred. 4. In the preferential factors of the hedges, the preference of the hedge is mainly influenced by density. As the result of multiple regression analysis of visual preference as the height, the density, the width, and the regression equation are as follows : Visual Preference = 0.094+0.412(density)+0.370(height)+0.177(width)
The Journal of Korean Academic Society of Nursing Education
/
v.18
no.1
/
pp.102-110
/
2012
Purpose: The purpose of this study was to evaluate the effects of BLS training in nursing students and their retention period. Methods: The participants were 48 nursing students enrolled in M University in Mokpo. Data were collected from September, 2009 through September 2010. Nursing students were tested for their knowledge, attitude, confidence before, immediately after, 4 weeks after, 8 weeks after, 6 months after, and 1 year after BLS training. In addition, their knowledge and skill of cardiopulmonary resuscitation were tested 5 times. Data were analyzed using the SPSS/PC 12.0 statistical program Results: Knowledge, attitude and confidence were significantly increased immediately after compared to before BLS training. Knowledge and confidence 6 months after, and attitude, performance ability and technical precision for ventilation and compression 4 weeks after BLS training were significantly decreased compared to immediately after. Conclusion: Overall retention of BLS training effects among nursing students, without reinforcement, decreases significantly after six months following initial training. BLS training in nursing students should be repeated every six months, especially performance training of BLS should be repeated every 4 weeks. In addition, to maintain the knowledge and skills of BLS, appropriate renewal time of certification and improvement of training programs are necessary.
According to the data of Korea Occupational Safety and Health Agency, electric shock accidents during recent 11 years exceeded more than 60% in architecture/other and construction work, the countermeasures for safety are required in the harsh environment of a construction site where moving electric machines and equipments are widely used. The establishment of countermeasure for insulation degradation and defect is required, in consideration of increasing trend for accidents caused by defective insulation among low voltage electrical installation each year. The aim of this study is to propose the policy about portable electrical tool standards and/or worker's safety standards for preventing electric shock accidents on safety workings, and is to develop the technology and the safety device to prevent electric shock for accident prevention reduction through experiments. It obtained the followings through this study; statistical data analysis of late about 10 years of electric shock-related industrial accidents analysis and portable electric tools; safety device development of 'device for testing continuous grounding and power shut-down' to prevent electric shock from portable electric tools. Furthermore, developed results and proposal in this study will help to prevent the electric shock accidents from portable electric tools and will be expected the utilization of policy formulation, educational data and field supplement of the safety device, and etc.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.