• 제목/요약/키워드: Stationary source

검색결과 240건 처리시간 0.028초

비백색 잡음 환경에서 정합필터 성능개선을 위한 백색화 기법 (Whitening Method for Performance Improvement of the Matched Filter in the Non-white Noise Environment)

  • 김정구
    • 한국산업정보학회논문지
    • /
    • 제11권3호
    • /
    • pp.15-19
    • /
    • 2006
  • 비백색잡음(non-white noise)인 잔향(reverberation)이 신호탐지(signal detection)의 주 방해신호인 천해 능동소나(active sonar) 환경에서의 표적탐지는 선백색화기(pre-whitener)를 사용하여 수신신호를 백색화한 후 백색잡음에서 최적 탐지기(optimum detector)인 정합필터를 사용한다. 그러나 이 방법은 잔향이 비정상(non-stationary) 특성을 가지기 때문에 구현이 매우 힘들다. 기존의 연구에 따르면 이러한 잔향은 지역적 정상상태(local stationary).라고 가정할 수 있다. 본 논문에서는 먼저 잔향신호의 지역적 정상상태의 범위를 추정(estimation)하고, 이 추정을 바탕으로 비백색 잔향신호 환경에서 선백색화 블록 정규화 정합필터(pre-whitening block normalized matched filter)의 성능을 개선할 수 있는 선백색화 기법을 제안하였다. 제안된 잔향신호의 백색화 기법은 표적신호 전 후의 잔향신호를 사용하여 처리블록(processing block)을 백색화하기 때문에 기존의 백색화 기법보다 우수한 성능을 보였다. 제안된 백색화 기법을 이용한 탐지기의 성능을 평가하기 위해 우리나라 인근해역에서 실측된 데이터를 이용하여 컴퓨터 모의실험을 수행하였다. 모의실험 결과 제안된 기법을 사용한 탐지기는 기존의 백색화 기법을 사용한 탐지기보다 우수한 탐지선응을 보였다.

  • PDF

백색부후균에 의한 크라프트 펄프 표백폐수의 탈색 (Decoorizatiion of Kraft Pulp Bleaching Effluent by White -rot Fungi)

  • 조남석;이재원;박종문;최태호;안드레레오노비치
    • 펄프종이기술
    • /
    • 제31권4호
    • /
    • pp.58-68
    • /
    • 1999
  • This experiment was to investigate decoloization characteristics of E1 effluents from the bleaching plant of pulp mill with three white-rot fungi(Trametes versicolor, Ganoderma appanatum and Pleurotus ostreatus).In addition, the effect of carbon and nitrogen resources was discussed on its decolorization. The color removal of E1 effluent during shaking and stationary cultures were 72% and 80%, respectively. Stationary culture was more effective on decolorization of E1 effluent compared to the shaking culture. The optimum inoculum weight was 1.0g based on dry weight of mycelia . The decolorization medium I showed 88% of the color removal of E1 effluent with in one day cultivation of T.versicolor and P.ostreatus . Color removal was increased from 87% to 90%. T.versicolor and P.ostreatus by the addition of 0.5% glucose. By addition of nitorgen sources(ammonium sulfate and ammonium choride), medium was much higher than that of carbon source. With 0.1% ammoniumm sulfate, P.ostreatus and T.versicolor showed 94% and 92% of the color removal within one day of cultivation , respectively. On decolorization medium II, T.versicolor and P.ostretus were 94% of oclor removal with addition of carbon source. The addition of nitrogen source was much more efficient than that of carbon source. With 0.1% amminium chloride, T.versicolor and P.ostreatus showed 95% of its color removal . The decolorization medium II was higher color removal than medium I, and also MnP and laccase were produced. However, the decolorization medium I produced a little MnP and laccase activity. It could be suggested that MnP and laccase may play an important role in decolorization of E1 effluent.

  • PDF

정상 가우시안 소오스와 음성 신호용 변환 격자 코드에 대한 훈련 알고리즘 개발 (A Training Algorithm for the Transform Trellis Code with Applications to Stationary Gaussian Sources and Speech)

  • 김동윤;박용서;황금찬
    • 한국음향학회지
    • /
    • 제11권1호
    • /
    • pp.22-34
    • /
    • 1992
  • 변환 격차 코드는 모든 레이트에서 정상 가우시안 소오스와 자승 오차 왜곡에 대해 최적코드이다. 본 논문은 실제 데이타의 통계적 특성에 잘 맞는 코드를 얻기 위해 점근적으로 최적인 변환 격자 코드를 훈련시켰다. 훈련 알고리즘은 격자 코드북을 탐색하기위한 M알고리즘과 코드북을 새롭게하기 위한 LBG 알고리즘을 사용했다. 훈련된 변환 격자 코드의 성능을 조사하기 위해서 상관 계수가 0.9인 1차 AR 가우시안 소오스와 실제 음성 데이타를 사용하였다. 1차 AR 소오스에서, 훈련에 사용되지 않은 데이타에 대한 SNR은 레이트에 따라 샤논의 정보량 왜곡 함수에 의한 SNR보다 0.6에서 1.4dB 낮았으나, 이것은 같은 계산량을 사용한 다른 코딩 결과들보다 우수 했다. 실제 음성 데이타는 레이트 1.0 bits/sample에서 코딩을 했으며, 보다 좋은 성능을 얻기 위해 윈도우 함수와 이득 적용을 사용했다.

  • PDF

차량환경에서 음성명령어기 사용을 위한 음성개선방법 (Speech Enhancement for Voice commander in Car environment)

  • 백승권;한민수;남승현;이봉호;함영권
    • 방송공학회논문지
    • /
    • 제9권1호
    • /
    • pp.9-16
    • /
    • 2004
  • 본 논문에서는 차량용 음성명령어기의 사용을 위한 전처리 과정으로 음성개선 방법을 다룬다 특히 보다 주위 소음에 자유롭고 단말 조작에 있어 안정성을 보장하기 위하여 일반적 단일 마이크로폰으로 처리되는 잡음뿐만 아니라 음성명령어를 제외한 오디오 신호 등 비정적 통계적 특성을 갖는 소음들도 제거 될 수 있도록 음성개선 방법을 제안한다. 우리는 2개의 마이크로폰을 가지고 BSS 알고리즘을 적용하여 비정적 신호들을 분리하고, 분리된 신호에 대하여 Kalman 필터를 이용하여 시간상 단구간 정적 잡음을 제거한다. 인식 실험 결과를 통하여 공간적, 시간적 음성개선 방법이 순차적으로 적용될 때, 실제 차량 환경에서 음성 개선 알고리즘으로 적용될 수 있음을 보였다.

SPT-type Plasma 발생장치를 이용한 폴리이미드의 표면개질과 접착력의 관계 (Surface Modification of Polyimide by Stationary Plasma thruster-type lasma Source : Correlations with Ahesion)

  • 박종용;;변동진;최원국
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
    • /
    • pp.181-184
    • /
    • 2003
  • Low Energy High flux Plasma Source인 Stationary Plasma thruster (SPT)를 이용하여 폴리이미드의 표면개질 후 접촉각과 표면에너지의 변화를 조사하고 접착력과의 관계를 조사하였다. 이온에너지는 180 eV - 200 eV, 이온전류 밀도는 수백 ${\mu}A/cm^2$, 이온선량은 $5\times10^{15}/cm^2$부터, $10\times^{18}/cm^2$$Ar^+,\;N_2^+,\;O_2^+$를 이온 주입시켰다. 표면 처리된 폴리이미드에 대한 접촉각 변화는 dual contact anglemeter로 증류수와 에틸렌글리콜을 이용하여 측정하였고, 표면에너지의 변화량을 구하였다. 접촉각의 변화는 아르곤 이온의 경우는 최저 $35^{\circ}$, 질소와 산소의 경우 $1\times10^{17}/cm^2$에서 각각 $14^{\circ},\;10^{\circ}$정도의 전촉각을 보였으며, $5\times10^{17}/cm^2$이상에서는 측정하기 불가능하였다. 산소 이온빔으로 처리된 PI의 표면을 x-ray photoelectron spectroscopy를 통하여 측정하여본 결과, 친수성기가 많이 형성되었음을 확인할 수 있었다. 접촉각 측정으르부터 PI의 표변에너지는 42.1 mN/m에서 아르곤 이온빔의 처리 시 65.2 mN/m로 산소 이온빔의 처리 시 81.2 mN/m로 각각 1.5배, 1.9배 정도 증대하였다. 산소 이온빔으로 처리된 PI 표면위에 스퍼터링으로 300 nm 정도의 clad layer 형성 후 $20{\mu}m$ 정도의 구리 전기 도금막을 형성하여, peel 강도를 측정한 결과 0.79 kg/cm의 강도를 얻을 수 있었다.

  • PDF

초음파 진동에 의해 발생된 음향유동을 활용한 급속냉각 메카니즘 (Rapid Cooling Mechanism Utilizing Acoustic Streaming Generated by Ultrasonic Vibrations)

  • 노병국;권기정;이동렬
    • 한국소음진동공학회논문집
    • /
    • 제16권10호
    • /
    • pp.1057-1066
    • /
    • 2006
  • Acoustic streaming Induced by longitudinal vibration at 30 kHz is visualized for a test fluid flow between the stationary glass plate and ultrasonic vibrating surface with particle imaging velocimetry (PIV) To measure an increase in the velocity of air flow due to acoustic streaming, the velocity of air flow in a gap between the heat source and ultrasonic vibrator is obtained quantitatively using PIV. The ultrasonic wave propagating into air in the gap generates steady-state secondary vortex called acoustic streaming which enhances convective cooling of the stationary heat source. Heat transfer through air in the gap is represented by experimental convective heat transfer coefficient with respect to the gap. Theoretical analysis shows that gaps for maximum heat transfer enhancement are the multiple of half wavelength. Optimal gaps for the actual design are experimentally found to be half wavelength and one wavelength. A drastic temperature variation exists for the local axial direction of the vibrator according to the measurement of the temperature distribution in the gap. The acoustic streaming velocity of the test fluid in the gap is at maximum when the gap agrees with the multiples of half wavelength of the ultrasonic wave, which are specifically 6 mm and 12 mm.

청소기의 공력소음 특성 파악 및 저소음화에 관한 연구 (A Study on the Identification of Aeroacoustic Noise and Noise Reduction for a Vacuum Cleaner)

  • 전완호;백승조;김창준
    • 한국소음진동공학회논문집
    • /
    • 제13권6호
    • /
    • pp.460-466
    • /
    • 2003
  • The aeroacoustic characteristics and noise reduction method of a centrifugal fan for a bagless vacuum cleaner were studied. The major noise source of vacuum cleaner is the centrifugal fan. The impeller of the fan rotates over 30000 rpm and generates very high-level piercing noise. It was found that the dominant noise source of the fan is generated from the aerodynamic interaction between the highly rotating impeller and stationary diffuser. In order to reduce the high tonal sound generated from the aerodynamic interaction between the impeller and diffuser, tapered impeller was carefully designed and tested. The trailing edge of the tapered impeller was inclined and this reduces the flow interactions between the rotating impeller and the stationary diffuser because of some phase shift. The static efficiency of the new impeller is slightly lower than the conventional one. The overall SPL is reduced about 3.6 dBA. The SPL of blade passing frequency(BPF) is reduced about 6 dBA and the $2^{nd}$ BPF is reduced about 20 dBA. The vacuum cleaner with the tapered impeller has lower noise level than that of the previous impeller and the strong tonal sound was dramatically reduced.

Production of 1,5-Dihydroxy-3-Methoxy-7-Methylanthracene-9,10-Dione by Submerged Culture of Shiraia bambusicola

  • Cai, Yujie;Ding, Yanrui;Tao, Guanjun;Liao, Xiangru
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권2호
    • /
    • pp.322-327
    • /
    • 2008
  • 1,5-Dihydroxy-3-methoxy-7-methylanthracene-9,10-dione (shiraiarin) is a kind of antitumor and antibacterial anthraquinone, and was produced for the first time from the submerged fermentation of Shiraia bambusicola, as confirmed by ESI-MS and NMR. The production of shiraiarin was significantly influenced when varying the carbon source, and a high amount of shiraiarin was only achieved when using lactose. The production of shiraiarin was also stimulated when using $NaNO_3$ as the nitrogen source, whereas other nitrogen sources inhibited its production. Shiraiarin was formed during the stationary phase with a pH value higher than 8. The production of shiraiarin was inhibited by sporulation.