• 한국공간구조학회논문집
• /
• 제5권3호
• /
• pp.91-100
• /
• 2005

본 연구는 구조물의 정량적 강성설계 기법 개발, 즉 부재 단위의 강성 재설계를 통한 전역 자유도 변위의 정량적 조절 기법개발을 궁극적 목적으로 한다. 이를 위하여 본 연구에서는 전역 자유도에 대한 부재의 변위기여도계수와 내력기여도계수를 유도하고, 이를 이용하여 특정 변위를 정량적으로 예측, 제어할 수 있도록 부재 강성과 특정 변위간의 상관식을 유도 제시하였다. 간단한 예제 구조물의 해석과 제안식 적용을 통한 변위 예측값 사이의 비교를 통하여 제안식을 검증하였다. 정정구조물의 경우 본 상관식은 정해로서, 이를 이용하여 폭정 변위를 원하는 목표치로 정확하게 제어할 수 있으며, 부정정구조물의 경우에도 부재 내력 재분배에 의한 오차가 발생하기는 함에도 불구하고 각 부재 강성과 특정 변위간의 상관성과 경향을 제시함으로써 매우 유용하게 활용될 수 있다. 본 연구에서 제안하는 정량적 변위 제어 기법은 강성설계가 전체 설계 결과를 지배하게 되는 대 공간구조물 또는 초고층건물의 설계 시 유용할 것으로 기대된다.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.59-68
• /
• 2015

Traditional structure analysis method is based on numerical matrix analysis to use the geometries consisting of the structure. The characteristics require a lot of computer memories and computational time. To avoid these weaknesses, new approach to analyze truss structure was suggested by adopting topological load redistribution method. The axial forces to be not structurely analyzed yet against outside loads were redistributed by using nodal equation of equilibrium randomly at each node without constructing global matrix. However, this method could not calculate the axial forces if structure is statically indeterminate due to degree of many indeterminacies. Therefore, to apply the method suggested in this research, all redundancies of truss structure were replaced by unit loads. Each unit load could make the deformation of a whole structure, and a superposition method was finally adopted to solve the simultaneous equations. The axial forces and deflections agreed with the result of commercial software within the relative error of 1 %, whereas in the case that the axial forces are relatively very smaller than others, the relative errors were increased to 2 %. However, as the values were small enough not to be considered, it was practically useful as a structural analysis model. This model will be used for structural analysis of truss type of large structure such as agricultural farming facility.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.685-688
• /
• 1999

The analysis and design of composite girders prestressed by external tendons involve difficulties related to the position of anchorages and the construction sequences. In this paper, the efficiency of the external tendon profiles and the position of anchorages in examined for the internal and external prestressing of statically indeterminate structures. It is shown that strengthening of a prestressed girder can be accomplished using a variety of methods; bonded external prestressing, tendon replacement and unbonded external prestressing.

• 대한토목학회논문집
• /
• 제35권4호
• /
• pp.801-814
• /
• 2015

이 논문에서는 스트럿-타이 모델을 이용한 프리스트레스트 콘크리트 보의 해석 및 설계 시 프리스트레스트 콘크리트 보의 비선형 파괴거동 특성 및 복잡한 하중전달 메커니즘을 합리적인 방법으로 반영할 수 있는 단순한 형태의 부정정 스트럿-타이 모델을 제안하였다. 또한 현행 설계기준서의 스트럿-타이 모델 규정을 이 연구에서 제안한 부정정 스트럿-타이 모델에 접목시켜 프리스트레스트 콘크리트 보의 해석 및 설계를 수행할 수 있는 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 이 연구에서 제안한 부정정 스트럿-타이 모델 및 하중분배율의 적합성을 검증하기 위해 파괴실험이 수행된 47개의 프리스트레스트 콘크리트 보의 극한강도를 평가하였으며, 그 결과를 현행 설계기준서의 스트럿-타이 모델 방법에 의한 평가결과와 비교분석 하였다.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.740-746
• /
• 2013

Angular contact ball bearings are often adopted for a high-speed spindle owing to their durability against axial and radial loads. The dynamic characteristics of an angular contact ball bearing, however, are very complicated because they are dependent on the applied loads as well as on the system configuration. This study systematically analyzes the radial-load-dependent characteristics of spindles as well as angular contact ball bearings. Toward this end, a spindle dynamic model along with the bearing dynamics model is established. An iterative solution algorithm is implemented to resolve the statically indeterminate problem associated with spindle-bearing systems subjected to radial load. Two numerical examples are provided to investigate the spindle and bearing characteristics as a function of radial load with regard to the system configuration.

• 한국산업융합학회 논문집
• /
• 제10권3호
• /
• pp.149-155
• /
• 2007

Damage assessment and Damage index for RC members failed in flexure was investigated by using the nonlinear finite element analysis, included with nonlocal constitutive law, which is analyzed for the localization of the failure on the post-peak region. In the nonlcal constitutive law, The local strains obtained at gauss points were averaged over a particular length, i.e. characteristic length and it was used to evaluate the damage of RC column member. As the analysis results, The value of nonlocal strain shows less mesh sensibility. In the damage assessment, It was confirmed that evaluations of damage of RC member were able to use nonlocal compressive strain on a cover concrete and a core concrete of the member. Moreover it was confirmed that damage process for the statically indeterminate structure was able to evaluate the damage context of the component members of the structure.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.94-100
• /
• 2003

Generally, cable-stayed bridges are both statically indeterminate structure with a high degree of redundancy and flexible structure. So it is very important to ensure precision control during both fabrication and construction. In precision control of cable-stayed bridges, precision control under multi-objective programming method is needed, because precision control problem of cable-stayed bridges is a multi-objective programming problem in which many objective functions are regard as variables. In previous studies, it was regarded as a single-objective problem, so it had many problems in respect of usefulness and rationalness. In this study, precision control under multi-objective programming method is proposed considering economy, efficiency, and safety at best in precision control of cable-stayed bridges. Precision control problem of cable-stayed bridges is formulated with satisfying trade-off method which is a kind of multi-objective programming method, then it is optimized with min-max method. A computer program is presented including above process.

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.356-359
• /
• 2020

Forces and moments delivered by a straight wire connecting two orthodontic brackets are statically indeterminate and cannot be estimated using the classical equations of static equilibrium. To identify the mechanics of such two-bracket systems, Burstone and Koenig used the principles of linear beam theory to estimate the resulting force systems. In the original publication, however, it remains unclear how the force systems were calculated because no reference or computational details on the underlying principles have been provided. Using the moment carry-over principle and the relative angulation of the brackets, a formula was derived to calculate the relative moments of the two brackets. Because of the moment equilibrium, the vertical forces that exist as a force-couple on the two brackets can also be calculated. The accuracy of the proposed approach can be validated using previously published empirical data.

• 기계저널
• /
• 제23권6호
• /
• pp.448-458
• /
• 1983

보의 처짐(deflection of beam) 및 부정정보(statically indeterminate beam)의 문제는 수문이나 압력용기등을 비롯한 각종 구조물의 강도계산에서 설계자가 자주 부딪치는 문제이다. 일반적으로 분포하중이나 집중하중 또는 집중 모우멘트가 작용하는 보, 특히 부정정 보의 경우 해석하기 쉬운 방법을 찾아 모우멘트-면적법, 중첩법, 3-모우멘트의 방정식등을 사용하여 반력이나 반력 모우멘트, 처짐량 등을 계산하고 있다. 그러나 이들 방식들은 일률적으로 어느 경우에나 적용하기에 적합한 것은 아니고 복잡한 각종 정리나 공식들을 사용하여야 하며 공액보(conjugated beam)의 반력을 구한다든가, 선도의 면적을 구하기 위하여 힘든 계산을 행하여야 하는 등 쉽지 않아, 부정정 보를 풀어야 할 경우가 발생할 때마다 좀 더 쉬운 접근방법이 없을까 하는 애로를 느껴왔다. 그러던 차 특이함수를 도입하여 문제의 해결을 시도하여 본 바, 복잡한 공식들을 외울 필요 없이 규칙적이고 일률적인 방법으로 쉽게 문제의 해결이 가능하기에 여기 간단히 풀이 방법을 소개하고자 한다.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.98-105
• /
• 2004

This study focuses on an analytical approach to calculate four crane lifting forces for heavy ship hull blocks considering elongations of lilting slings. Four-crane-lifting is a redundant problem. During lifting procedures, in addition to the force and moment equilibrium equations, a compatibility condition is introduced to determine 4 unknown lifting forces. For verification of the method, a ship hull block with field measurements data is analyzed and the result shows that the information obtained by current method could be useful to engineers to conduct lifting work at shipyards.