• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.177-184
• /
• 2008

Vehicle body frame stiffness affects the dynamic and static characteristics. Vehicle frame structure performance is greatly affected by crossmember and joint design. While the structural characteristic of these joint vary widely, there is no known tool currently in use that quickly predicts joint stiffness early in design cycle. This paper present the joint design factors affecting on low frequency vibration. The joint factors are joint panel thickness, flange width and weld point space. To study the effect on vehicle low frequency vibration, case studies for these factors are performed. The result can present design guide for high-stiffness vehicle.

• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.91-105
• /
• 2006

In this paper, post-earthquake capacity evaluation method of reinforced concrete buildings was studied. Substructure pseudo-dynamic test and static loading test of first story column in a four-story R/C building was carried out in order to investigate the validity of the evaluation method proposed in the Damage Assessment Guideline (JBDPA 2001). In pseudo-dynamic test, different levels of damage were induced in the specimens by pre-loading, and input levels of seismic motion, at which the specimens reached to the ultimate stage, were examined. From the experimental result, no significant difference in damage levels such as residual crack width between the specimens under static and pseudo-dynamic loading was found. It is shown that the seismic capacity reduction factors ${\eta}$ can provide a reasonable estimation of post-earthquake seismic capacity of R/C buildings suffered earthquakes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.97-104
• /
• 2005

The seismic behavior of framed structure with Chevron-type bucking restrained braces were investigated and their behavior factors were evaluated following the procedure proposed in ATC-19 & ATC-34. Two types of structures, building frame systems and dual systems, with 4, 8, 12, and 16 stories were designed per the IBC 2000, the AISC LRFD and the AISC/SEAOC Recommended Provisions for BRBF. Nonlinear static pushover analyses were carried out to observe the plastic hinge formation and to identify the loads and the displacements at the yield and the ultimate states. Time history analyses were also carried out to compute the permanent displacement md the dissipated hysteretic energy. According to the analysis results, the response modification factors of model structures fumed out to be larger than what is proposed in the provision in low story structures, and a little smaller in medium-story structures. The dual systems, even though designed with smaller seismic load, showed superior static and dynamic performances.

• 국제초고층학회논문집
• /
• 제8권4호
• /
• pp.265-273
• /
• 2019

The purpose of this review paper is to briefly describe main the features of novel procedures developed by the National of Standards and Technology (NIST) for the design of tall buildings. Topics considered in the paper include: the division of tasks between wind and structural engineers; the determination of wind effects with specified mean recurrence intervals by accounting for wind directionality; the risk-consistent design of structures subjected to multiple wind hazards; iterative dynamic analyses and member sizing, including the use of modern optimization approaches; and commonalities of and differences between Database-assisted Design (DAD) and Equivalent Static Wind Loads procedures. An example of the application of the DAD procedure is presented for a reinforced concrete structure. Also included in the paper is an introduction to ongoing research on the estimation of wind load factors or of augmented design mean recurrence intervals commensurate with the uncertainties in the factors that determine the wind effects.

• Smart Structures and Systems
• /
• 제16권3호
• /
• pp.521-535
• /
• 2015

Vibration-based monitoring is one approach used to perform structural condition assessment. By measuring structural response, such as displacement, dynamic characteristics of a structure may be estimated. Often, the primary dynamic responses in civil structures are below 5 Hz, making accurate low frequency measurement critical for successful dynamic characterization. In addition, static deflection measurements are useful for structural capacity and load rating assessments. This paper presents a DC coupled continuous wave radar to accurately detect both dynamic and static displacement. This low-cost radar sensor provides displacement measurements within a compact, wireless unit appropriate for a range of structural monitoring applications. The hardware components and operating mechanism of the radar are introduced and a series of laboratory experiments are presented to assess the performance characteristics of the radar. The laboratory and field experiments investigate the effect of factors such as target distance, motion amplitude, and motion frequency on the radar's measurement accuracy. The results demonstrate that the radar is capable of both static and dynamic displacement measurements with sub-millimeter accuracy, making it a promising technology for structural health monitoring.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.489-498
• /
• 2010

철근 콘크리트 구조물의 명확한 성능평가를 수행하기 위해 재료 및 구조적 특성이 구조물에 미치는 영향에 대한 분석이 필요하다. 구조물의 성능에 영향을 미치는 성능영향인자는 구조물의 재료적 특성인 콘크리트 강도, 종방향주철근, 횡구속 철근, 구조적 특성인 형상비, 축하중에 대하여 총 5가지로 정의하였다. 각각의 성능영향인자 변화에 따른 고유치 해석과 비선형 정적해석을 수행하여 각각의 성능영향인자들이 구조물의 항복 변위와 항복 기저전단력 및 연성비의 정적성능에 미치는 영향을 분석하였다. 또한 비선형 정적해석의 결과를 이용하여 FEMA-440에서 제안된 수정된 능력스펙트럼법을 이용하여 성능평가를 수행하였고, 이에 따라 구조물의 성능점을 도출하였으며 각각의 성능영향인자가 미치는 영향을 분석하였다. 성능영향인자 변화에 따른 해석 결과, 고유치해석과 비선형 정적해석의 따른 고유주기와 연성비는 구조적 특성이 재료적 특성에 비해 구조물에 더 큰 영향을 미치는 것으로 나타났고, 그 중 형상비의 영향이 가장 크게 작용하였으며, 수정된 능력스펙트럼법을 이용한 성능평가 결과, 고유주기와 연성비와 마찬가지로 구조적 특성 중 형상비의 영향이 가장 크게 작용하였다.

• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.147-152
• /
• 2014

2단으로 구성된 DFB 레이저의 정적 및 동적 작용을 분석하기 위하여 종방향 모드 전송선로 이론 (L-MTLT)을 이용하였다. 활성영역을 갖는 DFB 구조의 특성 임피던스와 등가 전파상수를 L-MTLT에 기초하여 유도하였다. 2단으로 구성된 DFB 레이저가 전송선로 망으로 유사화 되었으며, 각 단은 그에 대응하는 등가 요소들로 등가화된 전송선로 블록으로 나타내었다. 등가 전송선로 망에 기초한 DFB 레이저의 종방향 공진 조건 (resonance condition)이 레이트 방정식 (rate equation)을 재구성하기 위하여 사용되었으며, 이를 이용하여 활성여역을 갖는 2단 DFB 레이저의 정적 및 동적 작용을 자세하게 분석하였다.

• Steel and Composite Structures
• /
• 제48권6호
• /
• pp.625-639
• /
• 2023

In this paper, a Taguchi-based finite element method (FEM) has been proposed and implemented to assess optimal design parameters for minimum static deflection in laminated composite plate. An orthodox mathematical model (based on higher-order shear deformation plate theory and Green-Lagrange geometrical nonlinearity) has been used to compute the nonlinear central deflection values of laminated composite plates according to Taguchi design of experiment via a self-developed MATLAB computer code. The lay-up scheme, aspect ratio, thickness ratio and the support conditions of the laminated composite plate structure were designated as the governable design parameters. Analysis of variance (ANOVA) is used to investigate the effect of diverse control factors on the nonlinear static responses. Moreover, regression model is developed for predicting the desired responses. The ANOVA revealed that the lay-up scheme alongside the support condition plays vital role in minimizing the central deflection values of laminated composite plate under uniformly distributed load. The conformity test results of Taguchi analysis are also in good agreement with the numerical experimentation results.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.507-524
• /
• 2019

A Bayesian dynamic linear model (BDLM) is presented for a data-driven analysis for response prediction and load effect separation of a revolving auditorium structure, where the main loads are self-weight and dead loads, temperature load, and audience load. Analyses are carried out based on the long-term monitoring data for static strains on several key members of the structure. Three improvements are introduced to the ordinary regression BDLM, which are a classificatory regression term to address the temporary audience load effect, improved inference for the variance of observation noise to be updated continuously, and component discount factors for effective load effect separation. The effects of those improvements are evaluated regarding the root mean square errors, standard deviations, and 95% confidence intervals of the predictions. Bayes factors are used for evaluating the probability distributions of the predictions, which are essential to structural condition assessments, such as outlier identification and reliability analysis. The performance of the present BDLM has been successfully verified based on the simulated data and the real data obtained from the structural health monitoring system installed on the revolving structure.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.