• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.543-547
• /
• 2001

CAE has been settled down to an indispensable tool for the simulation of a mechanical system according to the development of computer-aided analysis rapidly. Particularly finite element programs have advanced to the one of most valuable things in the filed of CAE due to the remarkable progress in the implementation. But since this analysis tool mostly provides the result of the analysis, it cannot satisfy designers who are seeking for information to improve their designs. Therefore, design sensitivity analysis or optimization module has been incorporated into commercial FEA programs to satisfy the desire of designers since 1990s. Design sensitivity analysis is to compute the rate of change of response with respected to design variable. Design sensitivity analysis is classfied into static design sensitivity analysis, Eigenvalue design sensitivity analysis and dynamic design sensitivity analysis. In this research, it will be presented to nonlinear static design sensitivity analysis formulation and nonlinear static design sensitivity analysis external module based ANSYS have been developed and illustrated an example to verify the developed module.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.402-407
• /
• 2001

Sensitivity analysis scheme is developed in the elasto-plastic finite element method with explicit time integration using direct differentiation method. The direct differentiation is concerned with the time integration, constitutive relation, shell element with reduced integration and the contact scheme. Sensitivity analysis results are mainly examined with the highly nonlinear and quasi-static problem with the complicated contact condition. The result shows stable sensitivity especially in the sheet metal forming analysis.

• 대한전기학회논문지
• /
• 제44권1호
• /
• pp.21-24
• /
• 1995

The larger and the more complicated the system size and configuration grow, the more serious the system loss problem becomes. Exessive system loss causes severs system voltage depression, which even may result in system voltage collapse. This paper proposes an effective tool for minimizing the system power loss by optimal re-location of the static condenser based on the system loss sensitivity index .lambda.$_{Q}$. It is possible to determine the optimal location and amount of VAR investment for minimizing the system loss by priority of .lambda.$_{Q}$ index given for each bus. Several computational techniques for avoiding divergency of the load flow solution are proposed. The loss sensitivity index .lambda.$_{Q}$ uses information of normal power flow equations and their Jacobians. Two case studies proved the effectiveness of the algorithm proposed.posed.

• 동력기계공학회지
• /
• 제5권4호
• /
• pp.82-89
• /
• 2001

To design a structural or a mechanical system with the best performance, the main procedure of a typical design usually consists of repeated modifications of design parameters and the investigation of the system response for each set of these parameters. But this procedure requires much time, effort and experience. Sensitivity analysis can provide systematic information for improving performance of a system. The author has studied on the development of the structural analysis algorithm and suggested recently the transfer stiffness coefficient method(TSCM). This method is very suitable algorithm to a personal computer because the concept of the TSCM is based on the transfer of the nodal stiffness coefficients which are related to force and displacement vectors at each node. In this paper, a new sensitivity analysis algorithm using the concept of the TSCM is formulated for the computation of state variable sensitivity in static problems. The trust of the proposed algorithm is confirmed through the comparison with the computation results using existent sensitivity analysis algorithm and reanalysis for computation models.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.150-156
• /
• 1996

Static variations of cutting forces are estimated using spindle motor current. Static sensitivity of spindle motor current is higher than feed motor current. The linear relationship between the cutting force and RMS value of the spindle motor current is obtained. Using cutting force estimation, tool overload in milling process can be well detected, and cutting force is regulated at a constant level by feedrate adaptive control.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.101-110
• /
• 2012

This paper focuses on the finite element (FE) response sensitivity and reliability analyses considering smooth constitutive material models. A reinforced concrete frame is modeled for FE sensitivity analysis followed by direct differentiation method under both static and dynamic load cases. Later, the reliability analysis is performed to predict the seismic behavior of the frame. Displacement sensitivity discontinuities are observed along the pseudo-time axis using non-smooth concrete and reinforcing steel model under quasi-static loading. However, the smooth materials show continuity in response sensitivity at elastic to plastic transition points. The normalized sensitivity results are also used to measure the relative importance of the material parameters on the structural responses. In FE reliability analysis, the influence of smoothness behavior of reinforcing steel is carefully noticed. More efficient and reasonable reliability estimation can be achieved by using smooth material model compare with bilinear material constitutive model.

• 전산구조공학
• /
• 제9권4호
• /
• pp.117-126
• /
• 1996

구조물의 손상추정법은 정적방법과 동적방법으로 나눌 수 있다. 정적방법은 정적하중과 정적변위의 관계를 이용하여 구조물의 손상위치와 손상정도를 추정하는 방법으로 동적방법에 비해 수식이 간단하나, 정적하중과 정적변위의 관계만을 사용하여 구조물의 손상을 추정하므로 정적변위에 대한 오차에 매우 민감하다. 동적방법은 구조물의 고유한 진동특성을 나타내는 고유진동수와 진동모우드를 구하여 구조물의 손상을 추정하는 방법으로, 정적방법에 비해 동일한 측점에서 많은 양의 시간기록자료를 계측할 수 는 있으나, 신뢰성이 높은 많은 수의 고유진동수와 진동모우드를 구하기가 어렵다. 본 연구에서는 구조물의 정적변위, 고유진동수와 진동모우드에 대한 민감도행렬을 사용하여 구조물의 정적 및 동적특성을 동시에 고려할 수 있는 구조물의 손상추정법을 제시하였다. 제시한 방법은 구조물의 손상 전.후의 정적변위와 진동모우드의 변화량을 부등구속조건식으로한 최적화기법을 사용하므로, 제한된 계측절점과 오차를 고려할 수 있으며 정적변위와 모우드 민감도행렬이외의 다양한 구조적 특성에 대한 민감도를 구속조건식으로 사용할 수 있다. 트러스구조물에 대한 모의 수치예제를 통한 제안한 방법의 정확성과 효율성을 수치적으로 검증하였다.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.140-143
• /
• 2001

To better understand the formation of necking in drawing processes of fibers, strain distributions during drawing processes have been analyzed. For simplicity, one-dimensional incompressible steady flow at a constant temperature was assumed and quasi-static model was used. To describe mechanical properties of solid polymers, non-linear visco-plastic material properties were assumed using the power law type hardening and rate-sensitive equation. The effects of various parameters on the neck formation were matematically analyzed. As material property parameters, strain-hardening parameter, visco-elastic coefficient and strain-rate sensitivity were considered and, for process parameters, the drawing ratio and the process length were considered. It was found that rate-insensitive materials do not reach a steady flow state and the rate-sensitivity plays a key role to have a steady flow. Also, the neck formation is mainly affected by material properties, especially for the quasi-static model. If the process length changes, the strain distribution was found to be proportionally re-distributed along the process line by the factor of the total length change.

• Structural Engineering and Mechanics
• /
• 제41권4호
• /
• pp.539-558
• /
• 2012

The diagnosis of bridge serviceability is carried out by a combination of in-situ visual inspection, static and dynamic loading tests and analyses. Structural health monitoring (SHM) using information technology and sensors is increasingly being used for providing a better estimate of structural performance characteristics rather than above traditional methods. Because the mechanical behavior of bridges with various kinds of damage can not be made clear, it is very difficult to estimate both the damage mode and degree of damage of existing bridges. In this paper, the sensitivity of both static and dynamic behaviors of bridges are studied as a measure of damage assessment through experiments on model bridges induced with some specified artificial damages. And, a method of damage assessment of bridges based on those behaviors is discussed in detail. Finally, based on the results, a possible application for structural health monitoring systems for existing bridges is also discussed.

• 한국안광학회지
• /
• 제19권2호
• /
• pp.225-229
• /
• 2014

목적: 동적시력(Kinetic visual acuity, KVA), 대비감도(Contrast sensitivity), 정지시력(정지시각 Static visual angle, SVA) 등의 상관관계를 분석해 보고자 하였다. 방법: 안경광학과 재학생 99명(남 51명, 여 48명)을 대상으로 Topcon CV-3000 포롭터를 이용하여 완전교정 후 명소시($100cd/m^2$)상태에서 Vector Vision CSV-1000E를 이용하여 2.5 m 거리에서 대비감도를 측정하였다. 또한 KVA 측정장치(KOWA AS-4A)을 이용하여 동적시력을 측정하였다. KVA 정도에 따라, 0.1~0.3 L그룹, 0.31~0.60 M그룹, 0.61 이상을 H그룹으로 분류하고 대비감도, 정지시각, 굴절이상량 등의 상관관계를 분석하였다. 결과: KVA와 대비감도의 상관성은 3 cpd r=0.26, 6 cpd r = 0.48, 12 cpd r=0.38, 18 cpd r=0.47로 저주파수인 3 cpd를 제외하고, 모두 KVA와 SVA의 상관성 r = -0.37 보다 높았다. 주파수별 대비감도는 3, 6, 12, 18 cpd에서 각각 L그룹은 59.41, 92.22, 38.41, 14.39, M그룹은 66.03, 108.78, 53.51, 19.20, H그룹은 70.90, 146.10, 62.90, 25.33이였다. 결론: KVA와 대비감도의 상관성이 SVA보다 높으며, KVA가 높은 경우 저주파수 이외에서는 대체로 대비감도가 높은 것을 알 수 있었다.