• International Journal of Safety
• /
• 제4권1호
• /
• pp.27-31
• /
• 2005

This study presents the relationship between the height of the chair and the force of deltoid muscle for pianist. The subject simulated playing the piano on the three different heights of the chairs. Digital camera was used to determine the angle of the joint of shoulder and elbow for 2-dimensional static link segment modeling in the sagittal plane. The deltoid, biceps and triceps muscles were considered to determine the muscle load. The results, compared to the force of deltoid muscle, are that the downward position of the higher chair produces significantly large force than the other two lower chairs. It can be caused by hunched shoulder with decreasing deltoid angle. In case of the upward position caused by the lower chair, even though the smallest force of deltoid presented, it was increased the force of elbow.

• 한국공간구조학회논문집
• /
• 제15권4호
• /
• pp.91-98
• /
• 2015

This paper has proposed a reinforcing method for damaged RC columns with SRF sheets and Aramid rods. In order to verify the effectiveness and performance, two original columns and two reinforced columns with SRF sheets and Aramid rods were developed and tested under lateral cyclic displacement and a constant axial load. The test showed that the improvement of energy dissipation capacity was increased in terms of strength and ductility. In addition, an analytical modeling of the standard specimens was proposed using Response-2000 and ZeusNL program. The results of analytical and experimental studies for two standard columns were compared in terms of loading-displacement curve and energy dissipation capacity based on the nonlinear static analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.45-47
• /
• 2018

This paper describes the 40kV solid state pulsed power supply for environmental applications. The output specifications of the pulsed power supply are 40kV, 300A, 3kHz, and average output power of 13kW. In order to generate a high voltage, a series stacking cell structure is used which is charged in parallel and discharged in series. Due to this structure, there is no dynamic voltage balancing problem as well as static voltage balancing problem for switches used in high voltage pulse power supplies. To verify this pulse power supply design, PSpice modeling was performed. Finally, experimental results with non-inductive resistive load and gas treatment reactor proved the reliability of the solid state pulsed power supply.

• 한국시뮬레이션학회논문지
• /
• 제13권1호
• /
• pp.25-39
• /
• 2004

Simulation has been recognized as one of major application areas of world wide web. Over the last several years, most research has been focused on the development of web-based simulation languages mostly using JAVA and validation of simulation modeling on web with the newly developed languages. In this paper, we develop a tentative web-based simulator for a simple unit-load automated warehouse system, named Web-SAW. In constructing Web-SAW, we program a user interface program, a simulation logic program, and an animation program with JAVA while utilizing the class library functions and embodiment environment of existing web-based simulation languages. Web-SAW simulates the automated warehouse system with the user input about system operation, displays the animation on a static background representing the system, and generates the various textual outputs after simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1005-1008
• /
• 2000

This paper presents a simple method to estimate short-circuit power dissipation and propagation delay for static CMOS logic circuits. Short-circuit current expression is derived by accurately interpolating peak points of actual current curves which is influenced by the gate-to-drain coupling capacitance. The macro model and its expressions estimating the delay of CMOS circuits, which is based on the current modeling expression, are also proposed after investigating the voltage waveforms at transistor output modes. It is shown through simulations that the proposed technique yields better accuracy than previous methods when signal transition time and/or load capacitance decreases, which is a characteristic of the present technological evolution.

• Advances in concrete construction
• /
• 제13권5호
• /
• pp.377-384
• /
• 2022

The present paper deals with nonlinear deflection analysis of hyperelastic plates rested on elastic foundation and subject to a transverse point force. For modeling of hyperelastic material, three-parameter Ishihara model has been employed. The plate formulation is based on classic plate theory accounting for von-Karman geometric nonlinearity. Therefore, both material and geometric nonlinearities have been considered based on Ishihara hyperelastic plate model. The governing equations for the plate have been derived based on Hamilton's rule and then solved via Galerkin's method. Obtained results show that material parameters of hyperelastic material play an important role in defection analysis. Also, the effects of foundation parameter and load location on plate deflections will be discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권3호
• /
• pp.10-17
• /
• 2016

본 연구는 단경간 교량의 정적하중입력/변위출력관계를 이용한 새로운 교량 유한요소모델 개선 방법을 제안하였고, 실내 모형교량 실험을 통해 검증하였다. 기존의 유한요소모델개선기법은 실험으로부터 얻어진 모드계수와 유한요소모델로부터 예측된 모드계수가 유사해지도록 유한요소모델을 개선하는데, 이 과정에서 구조계의 질량행렬에 대한 가정을 필요로 한다. 제안된 기법은 질량행렬을 가정하지 않고, 오히려 질량행렬 추정을 가능하게 하는 장점을 가진다. 제안된 기법은 두 단계로 구성된다. 첫째, 정적 하중입력-변위응답으로부터 강성행렬을 개선하고, 둘째, 실측된 고유진동수를 이용하여 질량행렬을 개선한다. 실험검증을 위하여 실내 모형교량을 제작하였고, 제안된 기법을 이용하여 모형교량의 탄성계수를 추정하였으며, Universal Testing Machine으로 부터 얻어진 탄성계수와 비교하였다. 또한 기존의 유한요소모델개선기법으로 추정된 탄성계수와 비교하였다. 실험의 결과들로부터 제안된 기법이 합리적으로 탄성계수와 질량밀도를 추정하는 것이 관찰되었고, 기존의 유한요소모델개선기법은 고차모드를 사용했을 때 상대적으로 큰 오차를 주는 것이 관찰되었다. 추가적으로 유한요소모델링 오차에 대하여 토의하였다.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.116-128
• /
• 2010

Modeling of the three phase electric arc furnace and its voltage flicker mitigation are the purposes of this paper. For modeling of the electric arc furnace, at first, the arc is modeled by using current-voltage characteristic of a real arc. Then, the arc random characteristic has been taken into account by modulating the ac voltage via a band limited white noise. The electric arc furnace compensation with static VAr compensator, Thyristor Controlled Reactor combined with a Fixed Capacitor bank (TCR/FC), is discussed for closed loop control of the compensator. Instantaneous flicker sensation curves, before and after accomplishing compensation, are measured based on IEC standard. A new method for controlling TCR/FC compensator is proposed. This method is based on applying a predictive approach with closed loop control of the TCR/FC. In this method, by using the previous samples of the load reactive power, the future values of the load reactive power are predicted in order to consider the time delay in the compensator control. Also, in closed loop control, two different approaches are considered. The former is based on voltage regulation at the point of common coupling (PCC) and the later is based on enhancement of power factor at PCC. Finally, in order to show the effectiveness of the proposed methodology, the simulation results are provided.

• 한국추진공학회지
• /
• 제2권1호
• /
• pp.21-30
• /
• 1998

인공위성용 추진제 탱크를 개발하기 위해 여러 설계인자를 설정하여 각 인자가 탱크 벽면에 미치는 응력분포영향를 구하고, 또한 최적의 인자값을 구하기 위해 각 인자의 변화에 따라서 구조해석을 수행하였다. 탱크 지지부 위치와 탱크 벽면 두께 변화에 따른 탱크 벽면에 미치는 응력분포 영향을 고찰하기 위해 1/4 모델을 설정하였고, 연료배출구의 위치변화(경사각도)에 따른 응력분포는 1/2 모델을 설정하여 해석을 하였다. 탱크에 작용하는 하중은 연료압력에 의해 발생하는 정하중(350psi)을 가하며 또한, 발사시 발사체로부터 전달되는 최대동하중(12g)을 고려하였다. 그리고 탱크가 인공위성에 장착될 때에 발생하는 다양한 장착조건에 대해서 구조해석을 수행하였고, 추진제 배출구 각도가 $0^{\cire}$ 에서 $25^{\cire}$ 까지 변화할 때 탱크 벽면에 미치는 응력분포영향을 구했다. 그래서 각 조건에서 구한 상당응력분포와 인자의 최적값은 추진제 탱크를 설계하기 위한 기초적인 자료로 활용하고자 한다.

• 한국전산구조공학회논문집
• /
• 제31권6호
• /
• pp.283-291
• /
• 2018

본 연구는 지진에 저항하는 부재인 비보강 조적벽체로 구성된 건물의 내진성능평가에 활용되는 비선형 정적해석을 위한 비보강 조적벽체의 해석모델을 수립하고자 하였다. 본 연구의 해석모델은 비보강 조적벽체의 휨거동을 모사하기 위한 파이버 요소와 비보강 조적벽체의 전단에 대한 응답을 예측하기 위한 전단스프링 요소로 구성된다. 본 논문은 먼저 제안하고 있는 모델의 형상에 대해서 설명하고, 기존에 행해진 조적조 프리즘의 실험결과로부터 얻은 응력-변형률 곡선을 근거로 파이버와 전단스프링 요소의 물성치에 대한 결정 방법을 설명한다. 제시하고 있는 모델은 비선형 정적 해석결과와 다른 연구자들에 의해 수행된 실험결과를 비교하여 타당성을 검증한다. 해당 모델은 최대강도, 초기강성, 그리고 이들로부터 얻어지는 비보강 조적벽체의 하중-변위 곡선을 적절하게 모사하고 있다. 또한, 해석모델이 비보강 조적벽체의 파괴모드를 예측할 수 있는 것으로 나타난다.