• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.185-195
• /
• 2019

This study analyzes business performance factors for young startup, one of the solutions to the youth unemployment problem, and explored the effects of individual characteristics, capability, and environmental factors of young entrepreneurs on business performance. The study targets young traders operating in traditional markets and shopping streets nationwide. The 159 sample data were statistically analyzed using SPSS 25.0 and Smart PLS 2.0 for frequency analysis, reliability and validity analysis. The Entrepreneur's individual characteristics such as challenge spirit, start-up capability, and market characteristics affect absorptive capacity and interorganizational network. And absorptive capacity and interorganizational network affect financial and non-financial business performance. As a result, it was found that young traders need to reinforce their individual characteristics, start-up capability, and interorganizational networks in order to improve business performance. This study is intended to provide theoretical and practical implications.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.794-803
• /
• 2011

Self Organizing Map (SOM) was applied for pattern classification of hydrological and water quality data measured at Jangseong Reservoir on a monthly basis. The primary objective of the present study is to understand better data characteristics and relationship between the data. For the purpose, two SOMs were configured by a methodologically systematic approach with appropriate methods for data transformation, determination of map size and side lengths of the map. The SOMs constructed at the respective measurement stations for water quality data (JSD1 and JSD2) commonly classified the respective datasets into five clusters by Davies-Bouldin Index (DBI). The trained SOMs were fine-tuned by Ward's method of a hierarchical cluster analysis. On the one hand, the patterns with high values of standardized reference vectors for hydrological variables revealed the high possibility of eutrophication by TN or TP in the reservoir, in general. On the other hand, the clusters with low values of standardized reference vectors for hydrological variables showed the patterns with high COD concentration. In particular, Clsuter1 at JSD1 and Cluster5 at JSD2 represented the worst condition of water quality with high reference vectors for rainfall and storage in the reservoir. Consequently, SOM is applicable to identify the patterns of potential eutrophication in reservoirs according to the better understanding of data characteristics and their relationship.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.841-853
• /
• 2013

An application of doubly-fed induction generator (DFIG), which is one of adjustable speed generators, to a gas engine cogeneration system has been investigated. To operate during a blackout as an emergency power supply is one of important roles for the gas engine cogeneration system. However, the DFIG requires initial excitation for startup during a blackout because the DFIG has no excitation source. In this paper, we propose the "blackout start" as a new excitation method to generate a rated voltage at the primary side during a blackout. In addition, a stand-alone operation following a blackout has been investigated by using experimental setup with a real gas engine. Power flows in the generating set with the DFIG at the stand-alone operation have been investigated experimentally. Experimental investigation of the power flow suggests that the generating set with DFIG has optimal speed in minimizing whole system losses.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1816-1821
• /
• 2001

Two-dimensional blow-down type supersonic wind tunnel was designed and built to investigate the transient behavior of the startup of a supersonic flow from rest. The contour of the divergent part of the nozzle was determined by the MOC calculation. The converging part of the nozzle, upstream of fille throat was contoured to make the flow uniform at the throat. The flow characteristics of the steady supersonic condition were visualized using the high-speed schlieren photography. The Mach number was evaluated from the oblique shock wave angle on a sharp wedge with halt angle of 5 degree. The measured Mach number was 2.4 and was slightly less than the value predicted by the design calculation. The initial transient behavior of the nozzle was recorded by a high-speed digital video camera with schlieren technique. The measured transition time from standstill to a steady supersonic flow was estimated by analyzing the serial images. Typical transition time was approximately 0.1sec.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.235-241
• /
• 1995

YGN 3 and 4 are the nuclear power plants having System 80 characteristics with a rated thermal output of 2815 MWth and a nominal net electrical output of 1040 MWe. YGN 3 achieved commercial operation on March 31, 1995 and YGN 4 completed Power Ascension Test (PAT) at 20%, 50%, 80% and 100% power by September 23, 1995. YGN 3 and 4 design incorporates the Reactor Power Cutback System (RPCS) which reduces plant trips caused by Loss of Load (LOL)/Turbine Trip and Loss of One Main Feedwater Pump (LOMFWP). The key design objective of the RPCS is to improve overall plant availability and performance, while minimizing challenges to the plant safety systems. The RPCS is designed to rapidly reduce reactor power by dropping preselected Control Element Assemblies (CEAs) while other NSSS control systems maintain process parameters within acceptable ranges. Extensive RPCS related tests performed during the initial startup of YGN 4 demonstrated that the RPCS can maintain the reactor on-line without opening primary or secondary safety valves and without actuating the Engineered Safety Features Actuation System (ESFAS). It is expected that use of the RPCS at YGN will increase the overall availability of the units and reduce the number of challenges to plant safety systems.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.636-646
• /
• 2013

A single-phase tapped-inductor boost converter has been proposed previously. However, detailed characterization and performance analysis were not conducted. This paper presents a detailed characterization, performance analysis, and design expressions of a single-phase tapped-coupled-inductor boost converter. Expressions are derived for average and RMS input current as well as for RMS input and output capacitor current ripple. A systematic approach for sizing the tapped-coupled inductor, active switch, and output diode is presented; such approach has not been reported in related literature. This study reveals that sizing of the inductor has to be based on current ripple requirement, turns ratio, and load. Conditions that produce discontinuous inductor current are also discussed. Analysis of a non-ideal converter operating in continuous conduction mode is also conducted. The expression for the voltage ratio considering the coupling coefficient is derived. The suitability of the converter for high-voltage step-up applications is evaluated. Factors that affect the voltage boost ratio are also identified. The effects of duty ratio and load variation on the performance of the converter are also investigated. The theoretically derived characteristics are validated through simulations. Experimental results obtained at a low power level are included to validate the analytical and simulation results. A good agreement is observed among the analytical, simulation, and experimental results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.35-42
• /
• 2019

In this paper, we analyze the practical problems of the regenerative start method proposed to improve the starting characteristics of the TBM(Tunnel boring machine)system and propose a solution. In order to solve the speed ripple problem in the previous research results, we first analyze the problems occurring in the system and propose a method to compensate for them. By applying the improved method to the actual system, we compared the results with the conventional system and verified the effect of the proposed method.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.5
• /
• pp.481-489
• /
• 2016

Method of characteristic(MOC) has been widely used as a transient analysis technique for pressurized pipeline systems. There are substantial studies using MOC for the water hammer triggered through instantaneous valve closures, pump stoppage and pump startup for pipelines systems equipped with a centrifugal pump. Considering restrictions of MOC associated with courant number condition for complicated pipeline systems, an impulse response method(IRM) was developed in the frequency domain. this study implements the impact of centrifugal pump using transfer function in frequency domain approach. Using pump performance curve and the affinity law, this study formulated transfer functions which relate complex pressure head at upstream of pump system to that of downstream location. Simulations of simple reservoir-pump-valve system using IRM with formulated transfer function were similar to those obtained through MOC.

• Journal of Information Technology Applications and Management
• /
• v.20 no.4
• /
• pp.165-189
• /
• 2013

The advance of the smart working environment came the expectation that it would innovate and revolutionize the way people work, particularly in a society where smart work is readily available for creating a collaborative and 'connected' business. One of the core infrastructure elements for making smart work a viable option is the smart work center, the promotion of which requires a new form of 'smart work center business model' that can satisfy the purposes of both public services and private businesses. This calls for collaboration between the public and private sectors. Recently a number of businesses have been making significant headway in the creation of a new environment for business support and collaboration by adopting a sharing economy business model in their offices. The so-called 'Coworking Space' is an advanced form of business environment in the emerging 'smart work' era, and comes with the benefits of reduced costs as a result of sharing office space and knowledge sharing through the use of human networks. This paper describes the framework of a 'smart work center business model based on the sharing economy' using a BMC (Business Model Canvas), with an understanding of the characteristics inherent to the smart work center and the sharing economy. It was on the basis of this framework that a smart work center model for business incubation and startup, a private smart work center model for childcare services, and a community marketplace model with a global network were developed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.456-464
• /
• 2016

NCS development for construction of marine terminal structure was carried out through following procedures such as analysis on characteristics, analysis on duty, development of the first draft for standards, validation of industry sites, duty competency standards through expert committee, and utilizing package. The results were as follows. Firstly, duty competency was classified as levels from 3 to 7. Educational training institutions were followed by 22 universities, 21 colleges, 16 graduate schools, and 10 high schools. Secondly, developed standards were consisted of duty and competency unit. The name of duty was construction of marine terminal structure and competency units were consisted of 9 items as survey on economic effect, evaluation of conditions on construction environment, plan for construction of structure, construction of transfer, mooring, and power equipment, and construction, startup test, and maintenance of terminal structure. 33 competency unit elements below 9 competency units were developed. Thirdly, utilizing package was developed into 3 areas of life-long career path, training criteria, and guidelines for exam according to national competency standards for in order to develop development of labor's career and perform personal management such as hiring and promotion in industry sites.