• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.10
• /
• pp.476-480
• /
• 2003

In this paper, we have performed 3-dimensional time-resolving measurement of the Ne light emitted from the cell of plasma display panel(PDP) as a function of the pressure using the scanned point detecting system. From the temporal behavior results, we could analyze the discharge behavior of panel with Ne-Xe(4%) mixing gas and 300 torr, 400 torr and 500 torr pressure. At the top view of panel, the discharge of 300 torr panel starts at the 634 ns and ends at the 722 ns. The emission duration time is about 90 ns. The discharge of 400 torr panel starts at the 682 ns and ends at the 786 ns. the emission duration time is about 100 ns. Also, the discharge of 500 torr panel starts at the 770 ns and ends at the 826 ns. the emission duration time is about 56 ns. The discharge moves from inner edge of cathode electrode to outer cathode electrode forming arc type. In the side view of 300 torr, 400 torr and 500 torr an emission shows that the light is detected up to 180${\mu}{\textrm}{m}$, 150${\mu}{\textrm}{m}$ and 70${\mu}{\textrm}{m}$ height of barrier rib and the emission distribution of the 300 torr is wider than 400 torr, 500 torr.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.12
• /
• pp.929-934
• /
• 2002

This paper considers the vibration Problem of vehicle driveline which consists of two propeller shafts and the center bearing. The excessive vibration occurs at the center bearing when the vehicle starts to run. Using the kinematic constraints at the universal joint between two propeller shafts, we developed an one d.o.f model which describes the radial motion of the center bearing. We found out that the vibration occurs at the specific vehicle speed corresponding to the natural frequency of the model. Comparing the simulation results with test results we also show that the vibration at low vehicle speed is caused primarily by the feint angle and secondarily by the mis-aligned yoke flange rather than by the unbalance.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.305-312
• /
• 2005

Pick-up/delivery of consumer goods to offices, shops, and restaurants in order to support urban lives is one of the most vital activities in a city. With economic growth and technological innovation, a greater variety of goods have come to be supplied, and pick-up/delivery of consumer goods has become more complex. Efficient urban goods movement in Central Business District(CBD} starts with an efficient system for loading/unloading, and pick-up/delivery activities. Loading/unloading activity may be carried out on-street, or on especially designated space inside or outside buildings. Therefore, purpose of this study is to clarity the efficient urban goods movement in CBD(also called the pick-up/delivery activity) from the three different types of loading/unloading facilities. For this purpose, the differences in loading/unloading and truck-trip activity time of each loading/unloading facility was compared by performing the simulation analysis.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.91-104
• /
• 2016

The major results of the study are as follows: First, the accomplishement needs and academic self-efficacy enables students with start-up education through studying immersion and entrepreneurship to set up realistic objectives for personal life and resolving unpredictable problems. Second, creativity does not significantly affect studying immersion, but the higher the creativity of students participating in start-up education, the higher the entrepreneurship compare to studying immersion. Third, studying immersion has a significant impact on entrepreneurship, but has less impact on student's intention for start-up. Students with higher studying immersion through start-up education has higher entrepreneurship spirit and as a result, higher intention for start-up. Finally, the limitation of the study was that the sample was taken only from the freshman of Soonchunhyang University. Therefore, further study is needed for students from all university with start-up education.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.1005-1013
• /
• 2002

Spin-up is a transient flow phenomenon occurring in a container when it starts to rotate from rest or its rotational speed increases from a low to high value. However, most studies on this subject have been for two-dimensional approximation. In this study, spin-up flows in a shallow rectangular container are analysed by using three-dimensional computation. We compared our results with those obtained by others using basically two-dimensional computation. Effect of two parameters, Reynolds number and liquid depth on the flow evolution is studied. We found that 2-D result is not accurate enough, and the vertical velocity distribution should be assumed of a fourth-order polynomial function for a better comparison.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.27-37
• /
• 2013

In recent, Korean government TF Team announced new entrepreneurship policy of establishing virtuous cycle in high-tech venture startup financing ecosystem with emphasizing on 'boosting up angel investment and M&A.' This policy is brought not only to come up with the previous policy defects of creating less creative starts-up despite that government has put die-hard efforts, such as big chunk of budget dumping and policy preference, to promote high-tech starts-up since the year of 1997, but also to found right momentum of shifting entrepreneurship policy paradigm from government-direct to entrepreneur into indirect via utilizing the market forces. In particular, this policy puts a highlight on promoting angel investment, representing unfolding red carpets for creative economy. However, this policy confront critical fatal flaws such as a serious lacks of business angels which carry out the core function of government policy. In worse off, business angels cannot be raised up in short term period by taking other practical entrepreneurship ecosystem cases. As alternative, this paper propose the raising-up over entrepreneurship facilitators with having angel investing potentials in short term. In specific, this paper suggest the training methodology over the previous BI manager, passive simple angel investors, and consultants in entrepreneurship for embedding entrepreneurship facilitators. This paper carries four different specific studies. First, this paper implement literature review for entrepreneurship policy with respect to evaluating the previous entrepreneurship policies and making a diagnosis over its consequences. Second, it carries theoretical literature reviews relating to Korean angel investment and business incubation. Third, it proposes the concept of entrepreneurship facilitators. Fourth, it brings the alternatives of raising up entrepreneurship facilitators.

• International Journal of Automotive Technology
• /
• v.4 no.1
• /
• pp.41-45
• /
• 2003

The 42V Mild Hybrid System has been released into market by Toyota for the first time in the world in 2001. The set-up employs an inverter unit to control the motor/generator (MG) electronically. The driving system called such as Toyota Mild Hybrid System (TMHS) has additional new functions to conventional internal combustion engines. When stopping vehicle, the engine stops promptly. When starting vehicle, by releasing the brake pedal MG starts the vehicle at the same time (EV-driving mode). When stepping on the accelerator pedal, or after a given period of time the engine firing occurs and the engine-driving mode starts. When running by motor, the power is supplied to the motor from 36V battery through the inverter. High outputs and instant responses are required for Inverter. At the same time, the compact volume is required to fit into the limited space of the engine room. The compact size and high output are also required to Power Capacitor used for this inverter. The power capacitors has been newly developed, shaped in "flat" type, suitably for the inverter. The points of developments on inverter and power capacitor are described in this paper.his paper.

• Korean Journal of Child Studies
• /
• v.5
• /
• pp.65-80
• /
• 1984

The purpose of this study was the description of general trends in feeding, weaning and toilet training in agricultural and fishing communities in Korea, where the traditions are better preserved; thereby to present useful material for improving child rearing practices. The results of this study showed that: 1) Breast-feeding is the dominant form of nursing. The mother nurses freely whenever the baby wants to be fed. The mother caresses the baby while she nurses him. The nursing period is relatively long, up to 1 and a half years. 2) Generally, the time of weaning starts late - between 9 months and 18 months. Many mothers apply a bitter tasting solution to their nipples to aid weaning. The many things give a baby foods, the recipe for which the acquire knowledge from his family and acquaintances. 3) Toilet training generally starts after 1 full year. Potties are commonly used. The infant is reminded of its error whenever it makes a mistake and cleanliness is stressed. Urination and defecation are taught to be dirty things. In summary, discipline is not strict enforced but given naturally as the infants grow: This was interpreted in terms of the traditional way of life and geographical characteristics.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.268-270
• /
• 2009

This paper proposes a simple starting method to arrange the rotor position of the blushless DC motor (BLDC) without additional sensors and any information of motor parameters. Both the stator current and time period for arranging the rotor position can be easily adjusted by modulating a pulse width of switching devices. Using the proposed method, it is demonstrated experimentally that the BLDC starts up very smoothly.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.415-420
• /
• 2006

Nanostructured metallic materials are synthesized by bottom-up processing which starts with powders for assembling bulk materials or top-down processing starting with a bulk solid. A representative bottom-up and top-down paths for bulk nanostructured/ultrafine grained metallic materials are powder consolidation and severe plastic deformation (SPD) methods, respectively. In this study, the bottom-up powder and top-down SPD approaches were combined in order to achieve both full density and grain refinement without grain growth, which were considered as a bottle neck of the bottom-up method using conventional powder metallurgy of compaction and sintering. For the powder consolidation, equal channel angular pressing (ECAP), one of the most promising method in SPD, was used. The ECAP processing associated with stress developments was investigated. ECAP for powder consolidation were numerically analyzed using the finite element method (FEM) in conjunction with pressure and shear stress.