• Journal of Korean Classical Literature and Education
• /
• no.16
• /
• pp.65-90
• /
• 2008

This study is on the reading method of Korean old poetry in the digital age. Now days, we are living in digital media. The method of getting, organizing, and producing information is changed a lot. So for keeping pace with this change, we should reflect our teaching method. Of course, the purpose of our reflection is not to follow digital media's method and change or alter existing reading or teaching method, but it is to identify proper own reading strategy of old poetry and adjust existing method for our student who are skilled with digital media. We propose three kinds of method for student readers in school. These are 1) starting like a newspaper reader, 2) getting context (reading, making hyperlink), and 3) figuring as an architect (reading as space or scenery creator). In addition, we think about recent tendency that Korean old poetry is de-constructed and re-constructed as digital contents in digital space. We call it digitalizing of old poetry. The experiencing old poetry as a digital contents is different from reading old poetry, so we cannot alter old poetry reading experience into experience of digital contents. In conclusion, digitalizing contents should be used restrictively to fertilize reading experience of original old poetry.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.1-7
• /
• 2003

In this study, steady/unsteady aerodynamic characteristic for three dimensional symmetric wing was investigated numerically using Vortex Panel Method. This program utilized linearly varying vortices in x and y directions distributed on the wing surface and was applied to the incompressible potential. flow around a three dimensional wing Separation and deformation of the wake are not considered. The comparison between NACA Airfoil Data and the computed results showed excellent agreement. πus method was applied to unsteady wings undergoing both sudden pitch-up and constant rate pitching motion. In the unsteady flow analysis, a formation and a time-dependent locations of Starting Vortices are considered and the effect of Starting Vortices on aerodynamic characteristic of the wing was calculated. The present method can be extended to apply for more complicated cases such as pitching, flapping and rotating wing analysis.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.146-152
• /
• 2008

The frequency of lightning is increased due to improbable weather condition and global wanning. This phenomenon increases economical damage as well as human damage. Advanced countries like europe and north america have applied the facility standard of lightning by accumulating a store of quantitative data about lightning research. Lightning facility is composed of the lightning accepting part for induction lightning, ground connected electrode which conducts lightning current. The lightning accepting part is composed of normal rod, horizontal conductor, ESE lightning rod. Moreover, lightning accepting part is taken to use by the method of protection. This paper suggests HEC(Hybrid ESE-Conductor) method which mixes horizontal conductor and ESE lightning rod. This is also discovered by experiment that the starting point of corona discharge current is low, so it is efficient for lightning protection comparing with other methods. Moreover, distribution of electric field is analyzed qualitatively by finite element method. It also results in the relation of the starting point of corona discharge current. Corona discharge current makes minute current about some ${\mu}A$ between the electrodes by the strength of electric field. Also it occurs insulation destruction of gas, and it is developed to the shape of streamer by increase of the strength of electric field. We can find that the initial occurrence of streamer and contact probability of lightning can have advantage after researching the starting point of corona discharge current and discharge current of lightning striking point. This research demonstrates that the suggested HEC method is economically competitive as a lightning protection facility, and it takes a capably perfect role.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.411-417
• /
• 2008

Aerosol Deposition Method (ADM) is a novel technique to grow ceramic thick films with high density and nano-crystal structure at room temperature. $^{1,2)}$ For these unique advantages of ADM, it would be applied to the fabrication process of 3-D integration ceramic modules effectively. However, it is critical to control the properties of starting powders, because a film formation through ADM is achieved by impaction and consolidation of starting powders on the substrates. We fabricated alumina thick films by ADM for the application to integral substrates for RF modules. When the as-received alumina powders were used as a starting material without any treatments, it was observed that the dielectric properties of as-deposited alumina films, such as relative permittivity and loss tangent, showed high dependency on the frequency. In this study, some techniques of powder pre-treatments to improve the dielectric properties of alumina thick films will be shown and the effects of starting powders on the properties of AD films will be discussed.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.433-441
• /
• 2022

In general, in an emergency generator system for an electric facility including an induction motor load, an emergency power generation facility larger than the facility load capacity is built due to the initial starting current of the induction motor. In order to reduce this economic burden, various methods to reduce the inrush current of induction motors are applied to suppress the additional expansion of generators due to the reduction of power generation facilities and the increase in electrical facilities. Among these methods, when a system with a built-in soft start function of an induction motor using an inverter is built, it is the best way to reduce the inrush current of the induction motor to less than the rated current. However, in this case, the installation cost of the inverter to drive the induction motor increases. This paper proposes a soft start method of an induction motor by expanding the frequency and voltage control operation area of an emergency generator. In addition, proposed a speed calculation method based on power factor information, which is essential information for stable soft start of an induction motor, and a method for generating a speed command value of the governor for starting with maximum torque.

• Korean Journal of Adult Nursing
• /
• v.13 no.4
• /
• pp.620-631
• /
• 2001

Purpose: Fatigue is one of the most common complaints of cancer patients. In this study, we analyzed the change of fatigue level and general symptoms as time go by, so that, we could explain more on the mechanism and change of fatigue in relation with treatment, and explore the influencing factors. Method: The subjects of this study were 50 GI cancer patients who have visited the cancer center of A hospital in Suwon. We measured fatigue by using the Revised Piper Fatigue Scale(RPFS) at the time of starting and finishing induction chemotherapy, and starting the 2nd cycle of chemotherapy. Results: 1) The fatigue score was 2.81, 3.73, and 3.82 in a 10 point scale at the time of starting and finishing induction chemotherapy, and starting the 2nd chemotherapy, respectively. This means fatigue persisted until after the treatment. 2) Fifty two percent of participants complained of some kinds of symptoms when starting the treatment, and the proportion increased up to 92% when finishing the treatment. 3) Fatigue scores were significantly high in patients with fatigue-related symptoms than for patients without those symptoms. 4) Fatigue scores showed significant differences according to patients' general characteristics such as age, educational level, economic status, occupation, diagnosis, hematocrit, weight, and amount of sleepy. Conclusion: We have to develop intervention strategies to reduce fatigue in cancer patients in the consideration of influencing factors.

• Survey Research
• /
• v.3 no.2
• /
• pp.47-76
• /
• 2002

Starting point bias arises in the iterative bidding framework when the initial bid influences respondent's final bids. The bidding game has become the most commonly used method of asking the valuation question in contingent valuation studies. A bidding game is typically conducted by either personal or telephone interview. Bidding begins with an interviewer positing an initial bid (starting bid) to a respondent. If the respondent is willing to pay the initial bid, the interviewer revises the bid upward until a negative respondent is obtained. A negative response to the initial bid downward until an acceptable amount is found. The final bid is a measure of the respondent's Hicksian compensating or equivalent surplus for the item being valued. This paper explicity tested for starting point bias in bidding games. That is, it was asked whether final bids are influenced by the magnitude of the starting bids in the process of valuating the WTP when to improve the quality of running water in Seoul and its vicinity. The result shows staring point bias exists in the present data and its magnitude is ${\delta}$=-0.265237.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.4
• /
• pp.62-70
• /
• 1995

Brushless DC Motor (BDCM) is widely used in the industry such as a variable speed motor in a compressor for room air conditioners, because the motor can be easily controlled and operated over a wide speed range. The system to drive BDCM needs encoder that senses rotor position. Gut in a certain application, the position sensor has to be avoided. In the paper, various position sensorless drive systems for BDCM are investigated and critically evaluated, so that the effective method of sensorless control can be selected. Out of these methods, the freewheeling diode current sensing has many advantages. For example, the simple starting procedure makes it possible to perform sensorless control even in low speed. So the hardware design for this method has been carried out and the system has been implemented using DSP. The experimental results verified that the freewheeling diode current sensing approach has advantages in starting procedure and low speed sensing.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.255-256
• /
• 2016

This paper is presents a initial starting of SST with high voltage level source. Rush current flowing as difference between capacitor level and grid level can crush the whole system. Thus, industries have used initial constituted by resistance and relay. However the initial circuit used in industries can't apply high voltage application due to isolation and economic feasible problems. Therefore many countries study method can charge capacitor with another voltage sources. Also this paper introduce method charging primary side capacitor efficiently.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.98-100
• /
• 1996

In this paper, the Two-Double 1-2phase exciting driver circuit, in order to improving the starting characteristics of Linear Stepping Motor(LSM), is designed. And the static thrust forces of LSM is measured through the chopper constant current method according to the 2 phase, the Double 1-2phase, and the Two-Double 1-2phase exciting method.