• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2000.11a
• /
• pp.66-69
• /
• 2000

To investigate the influence of feeding Enviro on noxious gas of environmental controlled poultry house and performance of broiler chicks. Diets contained 21.5, 19.00 CP and 3,100, 3,200 kcal/kg ME, respectively for starting and finishing period. Enviro were supplemented with 0, 0.2, 0.4, 0.6 and 0, 0.1, 0.2, 0.3% in Expt 1and 2, respectively. CO$_2$and ammonia gas were periodically detected for finishing period in Expt 1. Weight gain, feed intake and feed conversion(FC) were measured for five weeks in Expt. 2. ND antibody titer were also measured after primary and booster vaccination at two and four weeks old. In Expt 1, chicks fed 0.2% Enviro showed 32.8ppm and 1719 ppm of ammonia gas, CO$_2$in poultry house and significantly decrease compared to that of control(P<0.05). Weight gain of chicks fed 0.1 and 0.2% Enviro was significantly increased for starting period(P<0.05) but was not statistically different for finishing period. Feed intake was no significantly different of all treatments. Chicks showed lower FC in 0.3% Enviro treatment for starting period(P<0.05) than others, but was not for finishing period. ND AB titet of chicks fed Enviro was prone to be higher than control, but was not significantly different. The results of these experiments indicated that 0.1% Enviro supplement would be maximize the performance of broiler chicks.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.6
• /
• pp.409-418
• /
• 2020

Objectives: This study conducted an age-period-cohort (APC) analysis of trends in healthy lifestyle behaviors in Japan. Methods: We used National Health and Nutrition Survey data on salt intake and prevalence of smoking, drinking, and physical activity between 1995 and 2018 in Japan. Age groups were defined from 20 years to 69 years old in 10-year increments. Cohorts were defined for each age group of each year with a 1-year shift, and cohorts born in 1926-1935 (first cohort) until 1989-1998 (last cohort) were examined. We conducted a Bayesian APC analysis, calculating estimated values for each behavior by age group, period, and cohort. Results: Estimated salt intake decreased from cohorts born in the 1930s to the 1960s, but increased thereafter in both genders, and the magnitude of increase was larger for men. Estimated smoking prevalence increased in the cohorts starting from the 1930s for men and the 1940s for women, and then decreased starting in the cohorts born in the 1970s for both genders. Although estimated drinking prevalence decreased starting in the cohorts born in approximately 1960 for men, for women it increased until the cohorts born in approximately 1970. Estimated physical activity prevalence decreased starting in the cohorts born in the 1940s in both genders, but the magnitude of decrease was larger for women. Conclusions: Trends in cohort effects differed by gender, which might be related to changes in the social environment for women. Improvements in dietary and exercise habits are required in more recently born cohorts of both genders.

• The Journal of Korean Medicine
• /
• v.15 no.2 s.28
• /
• pp.241-252
• /
• 1994

It is known that the pattern of combustion temperature can be classified into preheating, heating. retaining and cooling periods. In this experiment. the authors have studied the heating mechanism by the density of moxa material during the heating and retaining periods. The starting point. the point at which it begins to reach the maximum gradient temperature. the ending point of the heating period. and the ending point of the retaining period were measured in order to get effective stmulation by repetition of moxa-combustion. For the experiment. samples of 300mg. 400mg, and 500mg of moxa material were molded into conical molds with each 10mm in diameter and height resulting in the volume of $0.26cm^3$. The following results were obtained: The $300mg/0.26cm^3$ denstiy sample reached al1 points tested faster than the samples of $400mg/0.26cm^3$ and $500mg/0.26cm^3$ It dose not reveal any statistical differences between $400mg/0.26cm^3$ and $500mg/0.26cm^3$ in the ending point. the point at which it begins to reach the maximum gradient temperature of the heating period or the ending point of the reataining period The only difference shown was in the starting point of the heating period. According to the above results. it is concluded that the lower density moxa material reached each point of the the respective period faster than the high density moxa material.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.951-951
• /
• 2005

The characteristics of Boussinesq starting forced plumes were investigated in this study. Two distinct periods in the transient plume penetration were identified, namely the Period of Flow Development (PFD) and Period of Developed Flow (PDF). PFD refers to the time period whereby the penetration rate is governed by the complex vortex dynamics initiated by the exit conditions that can include vortex coalescence, vortex leapfrogging, pinching off of the head vortex from the trailing stem and the eventual reconnection. The pinch-off and reconnection leads to an overshoot of the plume front which is a common observation reported in previous studies. The penetration rate in PDF is more predictable and depends on the continuous feeding of buoyancy and momentum into the head vortex by the trailing buoyant-jet stem. Similarity solutions are developed for PDF to describe the temporal variation of the penetration rate, by incorporating the behavior of an isolated buoyant vortex ring and recent laboratory results on the trailing buoyant jet. In particular, the variations of velocity ratios between the head vortex and trailing buoyant jet are analytically computed. To verify the similarity solutions, experiments were conducted on vertical starting forced plumes using planar laser induced fluorescence (PLIF).

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.166-170
• /
• 1997

A Single phase induction motor is the predominant fractional horsepower power rated, extensively used in domestic and industrial application. For example, these motors provide the motive power to washing machines, fans, refrigerators, etc. In this paper, single phase induction motor input current was detected by a small current transformer and determined TRIAC gate signal by using op-amp analog circuit. The soft-start strategy is based on limited auxiliary current angle during starting period in the closed-loop control. The Simulation and experimental result show the motor's starting characteristics of the proposal starting system and are compared with centrifugal switch starting motor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.748-757
• /
• 2007

This paper is intended to solve the technical problem that fails in large-capacity induction motor starting due to serious voltage drop during starting period. One induction motor that is established already can reach in steady-state using reactor starting method but the voltage magnitude of PCC (point of common coupling) has dropped down a little. When the same capacity induction motor is installed additionally in the PCC, where the existing induction motor is operating, voltage drop becomes more serious by starting of additional induction motor. As a result, the additional induction motor fails in starting. Therefore, voltage compensation method is proposed so that all of two induction motors can be started completely. First, modeling technique is described in order to implement starting characteristics of large induction motor. And then, this paper proposes strategic starting scheme by proper voltage compensation that use no-load transformer tap control (NLTC) and step voltage regulator (SVR) for starting of two large induction motors successfully and improving the feeding network voltage profile during the starting period. The induction motor discussed in this paper is the pumped induction motor of 2500kVA capacity that is operating by KOWACO (Korea Water Resources Corporation). Modeling and simulation is conducted using PSCAD/EMTDC software.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.379-382
• /
• 2011

Engine test as well as unload test of starting motor itself was performed to evaluate the braking characteristics of starting system used for initial spin-up of gas turbine for power generation. Through the experimental evaluation of the braking performance with the capacity of braking resistor of the starting motor, we have achieved quantitative data to secure robust braking characteristics in emergency during the starting period of the gas turbine. It is possible to establish a capacity selection criterion of braking resistor to ensure the starting reliability of the gas turbine.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.123-137
• /
• 2003

This study is to present more effective starting skills through analysis of kinematic characteristics of starting motions in 300m Time Trials of Inline Skating. To achieve this goal, 6 athletes, 3 in the national team and 3 in business teams were chosen and their starting motions were examined with three-dimensional image analyses. The results of analyses in regard of positions and speed of the bodily center and angles, angular velocity, and linear velocity of articulations of lower limbs by sections of starting motions are as follows: In case of the central position, though it is effective to reduce the air resistance by lowering the upper part of the body maximumly, it is reasonable to accelerate by raising the upper part of the body to some degree for the running posture at the lower speed in the starting section. In the starting section, it is efficient to minimize the period of time in touching the ground. for this, it is necessary to train for taking motions without slippage while touching the ground. While 3 athletes in business teams kicked the ground as running right after the starting, the others in the national team slid on the ground. As the number of steps increased, the movable speed changed quickly. Thus the movable speed of athletes in the national team indicated big differences in two to three steps. If these factors are well supported, the push-away starting method might be better than the running starting method in terms of improvement of records.

• Korean Management Science Review
• /
• v.7 no.2
• /
• pp.51-57
• /
• 1990

The purpose of this thesis is to find the shortest path between two nodes on an acyclic network where the arc costs are determined by the starting time at the starting node of the arc. A branch and bound method for optimal solutions and a heuristic method is developed. In heuristic method Dijkstra algorithm is modified to maintain the minimum arrival times of maximum informations in the each time period at each node and is updated by the result with the insertion technique. Expermetal results among two methods are presented with regard to run time and solution qualities.

• Journal of Korean Academy of Nursing
• /
• v.3 no.3
• /
• pp.119-132
• /
• 1973

This study observed on habitual methods of toilet training for infants and toddlers in Korea thru 300 mothers at four medical institutions Ewha Woman′s University Hospital, Ewha Maternal and Child Health Center, Severance Hospital and Seoul National University Hospital) with a design to analyze beginning time, duration of period, methods employed, motives, equipments used, special terminology used for the subject training. The main purpose of this study was to generalize the proper methods of toilet training, and also to contribute a better psychological education for the mother and child. The results obtained from this study were as follows; 1. Majority of (67.3%) observed were in the age category between 30 and 40 years, and dominant numbers (64.7%) were housewives with high level of education and from middle class family background. 2. In the most cases (85%), toilet training was carried out by mothers(including wives who had a job) while more than half of mothers (53.7%) maintained their important motive for the training was "due to having high regard for cleanliness" 3. As for the time of beginning toilet training: finding indicated that starting period was decided (70%) at inconsiderate desertion of each mother. whereas, only minority group (30%) represents the cases where mother started the training when they consider tile child was physically and psychologically randy. Also greater number (77.7%) started bladder training prior to that of bowel. 4. It is noticeable that in course of training a large number of mothers (48.3%) applied strict training method when the child proper talenting, and the more rigid and strict in tile training. the more malformation of personality of the infant and toddler were seen after the training period (P<0.01). 5. Over the half of the total cases denoted (bowel 54.3%, bladder 67.7%) starting period before one year and in most cases (bowel 79.3%, bladder 729)the training was accomplished within 12 month, and therefore it was noted that earlier start(before 1 year) shortened the training period (with 12 month) . There was no significant difference between male and female infants in both starting period and duration of period in bladder training, however, in bowel training there was a tendency that female started earlier(7-12 months needed, 51.4%) than tile male (13-18 months needed, largest number 41.4%), and also in cases of female the period for needed for training were shorter than the cases of male. 6. Many a number (bowel 50.3%, bladder 97.7%) employed the method of continuous talenting at regular interval in accordance with that of child′s habit formed before training. Equipment used were various kinds, however, pieces of paper for male (45.5%) and piss pot or bedpost (42.3%) for female were common, on the other hand, "Eung-ga" for defecation (52.3%) and "Shii" for the urination (95.3%) were most standard expression that used during the training period.