• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.165-170
• /
• 2005

Sol-gel methods offer many advantages over conventional slip-casting, including the ability to produce ceramic membranes. They are purer, more homogeneous, more reactive and contain a wider variety of compositions. We produced ormosil sol using sol-gel process under various molecular weight of polymer species[polyethylene glycol(PEG)] in total system [Tetraethyl ortho silicate(TEOS)-polyethylene glycol(PEG)]. The properties of as-prepared ormosil sol such as viscosity and gelation time are characterized. Also, the ceramic membrane was prepared by dip-coating with synthetic sol and its microstructure was observed by scanning electron microscopy. The permeability and rejection efficiency of membrane for oil/water emulsion were evaluated as cross­flow apparatus. The ormosil sol coated membrane was easily formed by steric effect of polymer and it improved flux efficiency because infiltration into porous support decreased. Its flux efficiency was elevated about $200\;l/m^2h$ compared with colloidal sol coated membrane at point of five minutes from starting test.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.339-345
• /
• 2016

In this study, we numerically investigate the thermal performance of an enhanced radial heat sink with a perforation and chimney structure. We estimate the thermal performance of the enhanced radial heat sink, and compared it with that of a conventional radial heat sink. The results show that the radial heat sink with perforation has a higher thermal performance when either of the diameter and the number of perforations is high. With regards to the radial heat sink with a chimney structure, we investigate primarily the effect of the fin number, and the spacing between the chimney and the base plate on the thermal performance. The results show that there are optimal values for the fin number and the spacing between chimney and base plate. In addition, the enhanced radial heat sinks have maximum thermal performance when facing upward ($0^{\circ}$), while it has worst performance when facing sideward ($90^{\circ}$). The perforation and chimney are shown to cause thermal performance enhancements of 17% and 20%, respectively, compared with a conventional radial heat sink. The proposed method is useful for starting business, and is useful in terms of venture and entrepreneurship.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.61-71
• /
• 2017

The effects of joint density and size distribution on the hydrogeologic characteristics of jointed rock masses are addressed through numerical experiments based on the 2-D DFN (discrete fracture network) fluid flow analysis. Using two joint sets, a total of 51 2-D joint network system were generated with various joint density and size distribution. Twelve fluid flow directions were chosen every $30^{\circ}$ starting at $0^{\circ}$, and total of 612 $20m{\times}20m$ DFN blocks were prepared to calculate the directional block conductivity. Also, the theoretical block conductivity, principal conductivity tensor and average block conductivity for each generated joint network system were determined. The directional block conductivity and chance for the equivalent continuum behavior of the 2-D DFN system were found to increase with the increase of joint density or size distribution. However, the anisotropy of block hydraulic conductivity increases with the increase of density discrepancy between the joint sets, and the chance for the equivalent continuum behavior were found to decrease. The smaller the intersection angle of the two joint sets, the more the equivalent continuum behavior were affected by the change of joint density and size distribution. Even though the intersection angle is small enough that it is difficult to have equivalent continuum behavior, the chance for anisotropic equivalent continuum behavior increases as joint density or size distribution increases.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.536-546
• /
• 2006

Painterly animation is a method that expresses painterly images with a hand-painted appearance from a video, and the most crucial element for it is the temporal coherence of brush strokes between frames. A motion map is proposed in this paper as a solution to the issue of maintaining the temporal coherence in the brush strokes between the frames. A motion map is the region that frame-to-frame motions have occurred. Namely, this map refers to the region frame-to-frame edges move by the motion information with the motion occurred edges as a starting point. In this paper, we employ the optical flow method and block-based method to estimate the motion information. The method that yielded the biggest PSNR using the motion information (the directions and magnitudes) acquired by various methods of motion estimation has been chosen as the final motion information to form a motion map. The created motion map determine the part of the frame that should be re-painted. In order to express painterly images with a hand- painted appearance and maintain the temporal coherence of brush strokes, the motion information was applied to only the strong edges that determine the directions of the brush strokes. Also, this paper seek to reduce the flickering phenomenon between the frames by using the multiple exposure method and the difference map created by the difference between images of the source and the canvas. Maintenance of the coherence in the direction of the brush strokes was also attempted by a local gradient interpolation to maintain the structural coherence.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.1
• /
• pp.35-47
• /
• 2001

As the complexity of the our environment is further complicated by advancements in industry and increase in vehicle traffic flow, the incidents of injury causing accidents are on the rise. Consequently, there is increasing emphasis on the importance of systematic and continual safety education for injury preventive behaviors. This study investigates safety related problems of elementary school students based on the PRECEDE model, proposed by Green et al.(1980 Green), to comprehensively identify the requirements of school safety education. The identified requirements were used to diagnose the current state of elementary school safety education through the analysis of multidimensional factors. A questionnaire survey was conducted on 594 sixth grade students from randomly selected 4 schools in Seoul to examine their injury preventive behaviors and to determine the educational diagnosis variables that affect it. The duration of the survey was 3 weeks starting from April 12, 1999 to May 8, 1999. A summary of the survey results are presented below; 1. Situations in which accidents have occurred were, in their order of frequency, ‘during play or sports activities within the school grounds’ was most frequent at 59.6％, ‘during play on local streets’ at 49.5％, and ‘traffic accidents’ at 41.6％. 2. Categorization of the injury preventive behavior showed that ‘not playing at high traffic flow locations such as streets and construction sites’ had the higher level of observance, while ‘wearing of helmets and joint protection devices during playing’ was least observed. 3. Considering injury preventive behaviors in relation to educational diagnosis variables indicated, for predisposing factors, lower ‘perception to injury accidents’ (p〈0.001) combined with higher ‘concerns for injury accidents’(p〈0.001), ‘practice of preventive behavior’(p〈0.001), and ‘the level of safety knowledge’(p〈0.001) resulted in significantly higher observance of injury preventive behaviors. For enabling factors, higher ‘perceived level of the school safety education’ (p〈0.001) and ‘availability of safety education resources’(p〈0.01) indicated significantly higher observance of injury preventive behaviors. For the reinforcing factor, frequent exposure to ‘safety education brochure’ (p〈0.01) and ‘audio-visual material for safety education’(p〈0.01) combined with more ‘regional safety education’ (p〈0.01), ‘home safety education’ (p〈0.01), ‘school safety education’(p〈0.001), and, ‘parents’ observance of preventive behaviors' (p〈0.001) showed significantly higher observance of injury preventive behaviors. 4. An analysis of the factors that affect injury preventive behaviors showed that the enabling factor ‘awareness of school safety education’ had the highest correlation with injury preventive behaviors followed by factors, in their order of significance, ‘practice of preventive behavior’, ‘perception to injury accidents’, ‘level of safety knowledge’, ‘parents’ observances of preventive behaviors', and ‘concerns for injury accidents.’

• The Korean Journal of Pain
• /
• v.20 no.1
• /
• pp.15-20
• /
• 2007

Background: Lipo-prostaglandin E1 (Lipo-$PGE_1$) has vasodilating and platelet aggregation inhibitory characteristics and it has been used as a treatment for patients with blood flow dysfunction disease. Based on the mechanisms of lumbar spinal stenosis, including veno congestion, neuro-ischemia and mechanical compression, we aimed to study whether intravenous Lipo-$PGE_1$ injection has any therapeutic effect on hyperalgesia in a rat foraminal stenosis model. Methods: In this study, twenty male Sprague-Dawley rats were divided into the control (n = 10) and Lipo-$PGE_1$ (n = 10) groups. A small stainless steel rod was inserted into the L5-6 intervertebral foramen to induce intervertebral foramen stenosis and chronic DRG compression. In the Lipo-$PGE_1$ group, $0.15{\mu}g/kg$ of Lipo-$PGE_1$ were injected intravenously via a tail vein for 10 days starting from the $3^{rd}$ day after operation. Behavioral testing for mechanical and thermal hyperalgesia was performed for 3 weeks after the injections. Results: From the $10^{th}$ day after Lipo-$PGE_1$ injection, the rats in the experimental group showed significant recovery of their mechanical threshold, and this effect was maintained for 3 weeks. No significant differences of the thermal hyperalgesia were observed between the two groups. Conclusions: These findings suggest that intravenously injected Lipo-$PGE_1$ may be effective for alleviating neuropathic pain, which isthe main symptom of spinal stenosis, by improving the blood flow dysfunction.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.94-100
• /
• 2013

In this study, we have investigated the water quality and flow rate at the 3 sites of main stream and 11 sites of the branch stream of Hwang River from January, 2007 to 2010, and analyzed the effects on Hwang River with the purpose of using the data for as the fundamental information for water quality improvement and water resource management in the water system of Hap-Cheon Lake Upper Stream. The flow rate at 3 sites of the main stream and 11 sites of the branch stream increased during the rainy season between June and September, and continuously decreased during the dry season starting from autumn to winter. The results of correlation analysis with Pearson correlation coefficient showed that $BOD_5$ and $COD_{Mn}$, $BOD_5$ and T-P, and $COD_{Mn}$ and TSS at the 3 sites of the main stream had high correlation with each other. We have also analyzed the correlation between Chl-a and major factors at the 3 sites of the main stream. Chl-a and the water temperature Negative correlation coefficient and that of Chl-a and $BOD_5$, $COD_{Mn}$ Positive correlation coefficient showed. The N/P ratio at all the 3 sites of the main stream was higher than 16 by DIN/DIP and T-N/T-P, indicating that phosphorus is acting as the limited nutrient.

• Sim-seong Yeon-gu
• /
• v.38 no.1
• /
• pp.1-44
• /
• 2023

Hexagram Bi (比 ䷇ 8) is one of the hexagrams comprised of one-unbroken line and five-broken lines. The hexagrams of one-unbroken and five-broken lines symbolize the relationship and dynamics between one yang-consciousness and the five-yin unconsciousness. The hexagram of one-unbroken line and five-broken lines has six different images depending on the position of the one unbroken line from the beginning line to the top line. In terms of psychology, this means that the position change of one yang line in relation to five yin lines may symbolize the function of consciousness which clarifies and determines the content of the psyche. In addition, the flow of psychic energy can be examined through the process of one unbroken line's movement. In other words, the psychic contents of the beginning line of hexagram Bok (復 ䷗ 24), which is the beginning of the hexagram of one-unbroken line and five-broken lines, proceed sequentially, and then arrive at the process of the last sixth, hexagram Bak (剝 ䷖ 23) through the fifth, the hexagram Bi (8). That is, it can be said that the content of the hexagram and the line determined according to the position of one unbroken line show a certain psychic flow. As a result, the first hexagram Bok (復 ䷗ 24), after recovering and starting newly, means the beginning of consciousness. After that the process of proceeding with the second, third, and fourth lines represents the flow of consciousness. And in the fifth place, the fifth line of hexagram Bi, it reaches its peak and is placed in the optimal state of consciousness because of its right and centered position at this hexagram Bi. Like nature, the psyche gradually enters the path of decline from the highest state, which leads to the last sixth, the top line of hexagram Bak. However, the top line of the hexagram Bak, where everything falls off, contains the content of starting again in its top line. It is the beginning line of hexagram Bok to inherit this. This means the circumambulation of the psyche that changes from a psychologically difficult state of depression to a stage of recovery. There is a stage that must be passed in this circulation process, and that is the hexagram Gon (坤 ䷁ 2). October(tenth month)'s hexagram Gon is placed between hexagram Bak, the ninth month of the lunar calendar, and hexagram Bok, the eleventh month of the lunar calendar. This represents that the flow of recovery must go through a maternal process of hexagram Gon. The retreat to the psychological uterus is inevitable in regenerating the psyche. This process flows from the hexagram Bak and through hexagram Gon to the hexagram Bok. At this situation the hexagram Gon acts the absolutely necessary role. In addition, the main body of the hexagrams of one-unbroken and five-broken lines, including the Bi hexagram, is also the Gon hexagram composed of six-broken lines. In other words, all six hexagrams of one-unbroken and five-broken lines have a certain relationship with the Gon hexagram, and it would be meaningful to look at the correlation between the unbroken lines of the hexagrams of one-unbroken and five-broken lines and the corresponding broken lines of the hexagram Gon. This can be said to be the dynamics of the maternal unconscious connected to the state of consciousness in six forms. Therefore, each hexagram of one-unbroken and five-broken lines symbolizes the expression of the integration the mother archetype with the consciousness. Revealing this well is the meaning of the hexagram of one-unbroken and five-broken lines. Its hexagram image consists of a combination of Gon (☷), which symbolizes the mother, and the thunder (☳) the eldest son, the water (☵) the middle son and the mountain (☶) the third son. As a result, the hexagram Bok (復 ䷗ 24), Sa (師 ䷆ 7), Gyeom (謙 ䷠ 15), Ye (豫 ䷏ 16), Bi (比 ䷇ 8) and Bak (剝 ䷖ 23) are sequentially created in the order of the unbroken line. This is symbolically the evolutionary process of consciousness. In this way, the hexagrams of one-unbroken and five-broken lines, which mean the conjunction of mother and son, represent the advancing relationship between the maternal unconscious and consciousness. In addition, the relationship with the mother according to the position of the son is related to the dynamics of mother archetype to the attitude of consciousness. The psychological meaning can be deduced from the flow of six lines of hexagrams of one-unbroken and five-broken lines. And the state in which the activation of the consciousness is at its peak is the fifth line of the hexagram Bi, and comparing it with the contents of the corresponding fifth line of hexagram Gon not only can find the state and meaning of the conjunction of consciousness and the maternal unconscious, but the entire flow can be compared to the individuation process.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.366-375
• /
• 2019

This experiment aims to determine the proper irrigation scheduling based on a whole-substrate capacitance using a newly developed device (SCMD) by comparing with the integrated solar radiation automated irrigation system (ISR) and sap flow sensor automated irrigation system (SF) for the cultivation of tomato (Solanum lycopersicum L. 'Hoyong' 'Super Doterang') during spring to winter season. For the SCMD system, irrigation was conducted every 10 minutes after the first irrigation was started until the first run-off was occurred, of which the substrate capacitance was considered to be 100%. When the capacitance threshold (CT) was reached to the target point, irrigation was re-conducted. After that, when the target drain volume (TDV) was occurred, the irrigation stopped. The irrigation volume per event for the SCMD was set to 50, 75, or 100 mL at CT 0.9 and TDV 100 mL during the spring to summer cultivation, and the CT was set to 0.65, 0.75, 0.80, or 0.90 in the winter cultivation. When the irrigation volume per event was set to 50, 75, or 100 mL, the irrigation frequency in a day was 39, 29, and 19, respectively, and the drain rate was 3.04, 9.25, and 20.18%, respectively. When the CT was set to 0.65, 0.75, or 0.90 in winter, the irrigation frequency was about 6, 7, 15 times, respectively and the drain rate was 9.9, 10.8, 35.3% respectively. The signal of stem sap flow at the beginning of irrigation starting time did not correspond to that of solar irradiance when the irrigation volume per event was set to 50 or 75 mL, compared to that of 100 mL. In winter cultivation, the stem sap flow rate and substrate volumetric water content at the CT 0.65 treatment were very low, while they were very high at CT 0.90 was high. All the integrated data suggest that the proper range of irrigation volume per event is from 75 to 100 mL under at CT 0.9 and TDV 100 mL during the spring to summer cultivation, and the proper CT seems to be higher than 0.75 and lower than 0.90 under at 75 mL of the irrigation volume per event and TDV 70 mL during the winter cultivation. It is going to be necessary to investigate the relationship between capacitance value and substrate volumetric water content by determining the correction coefficient.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.57-71
• /
• 2015

This study was conducted to develop the fertigation system with a peristaltic hose pump and brushless DC motor. The fertigation system was consisted of sensor, main controller, motor control unit, peristaltic pump, water supply pump, control panel, and filter. The peristaltic pump discharges liquid by squeezing the tube with rollers. Rollers attached to the external circumference of the rotor compresses the flexible tube. The fluid is contained within a flexible tube fitted inside a circular pump casing. The developed fertigation system has no mixing tank but instead injects directly a concentrated nutrient solution into a water supply pipe. The revolution speed of the peristaltic pump is controlled by PWM (Pulse width modulation) method. When the revolution speed of the peristaltic pump was 300rpm, the flow rate of the 3.2, 4.8, 6.3mm diameter tube was 202, 530, 857mL/min, respectively. As increasing revolution speed, the flow rate of the peristaltic pump linearly increased. As the inner diameter of a tube larger, a slope of graph is more steep. Flow rate of three roller was more than that of four roller. Flow rate of a norprene tube with good restoring force was more than that of a pharmed tube. As EC sensor probe was installed in direct piping in comparison with bypass piping showed good performance. After starting the system, it took 16~17 seconds to stabilize EC. The maximum value of EC was 1.44~1.7dS/m at a setting value of 1.4dS/m. The developed fertigation system showed ±0.06dS/m deviation from the setting value of EC. In field test, Cucumber plants generally showed good growth. From these findings, this fertigation system can be appropriately suitable for fertigation culture for crops.