• 제목/요약/키워드: Starting Angle

검색결과 185건 처리시간 0.024초

관상동맥의 기하학적 형상변화에 따른 동맥경화 위험도 (Atherogenic Risk Stratification According to Changes in the Geometrical Shape of the Coronary Artery)

  • 서상호;박준길;노형운;이병권;권혁문
    • 대한기계학회논문집B
    • /
    • 제34권10호
    • /
    • pp.893-899
    • /
    • 2010
  • 박동유동조건에서 관상동맥 내의 유동특성과 혈류역학적 인자 분포를 선행연구에서 수행하여 혈류역학이 관상동맥 내의 협착현상과 연관관계가 있음을 밝혔다. 동맥경화증의 호발부위인 관상동맥 분지부에서 혈류역학적 변수를 분석하여 동맥경화증의 발생기전을 규명하는 것이 본 연구의 목적이다. 동맥경화증에 의한 협착현상은 혈액과 혈관벽 사이의 생화학 반응뿐 아니라 유동박리나 벽전단응력과 같은 혈류역학적 인자와도 관계 있음을 확인하였다. 관상동맥 분지부의 분지각이 증가할수록 분지부 단면에서의 재순환영역의 크기가 증가하고 교란유동이 발생하게 된다. 이 재순환영역이 관상동맥에서 동맥경화의 시작점으로 의심되는 영역이라 할 수 있다.

고속도로 휴게소 연결로 설계 기준 설정에 관한 연구 (A Development of the Design Guidelines for Connecting Roads in Highway Rest Area)

  • 이철수;원제무
    • 한국도로학회논문집
    • /
    • 제15권1호
    • /
    • pp.143-154
    • /
    • 2013
  • PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

배드민턴 스매시와 드롭 동작 시 선수의 기량 차이에 따른 상지 동작의 운동학적 비교 분석 (The Kinematic Analysis of Upper Extremities for Badminton Smash and Drop Motions depends on the Player's Level)

  • 조아라;류시현;윤석훈
    • 한국운동역학회지
    • /
    • 제23권3호
    • /
    • pp.201-208
    • /
    • 2013
  • The aim of this study was to investigate badminton smash and drop motion depends on player's level. To perform this study, ten male badminton players were participated: five skilled players (SG, age: $21.6{\pm}1.1$ yrs, height: $181.4{\pm}6.8$ cm, body mass: $72.4{\pm}5.7$ kg, career: $11.2{\pm}1.1$ yrs) and five less-skilled players (LSG, age: $21.2{\pm}1.1$ yrs, height: $180.2{\pm}5.6$ cm, body mass: $73.6{\pm}6.7$ kg, career: $10.6{\pm}0.9$ yrs). Three-dimensional motion analysis with 7 infrared cameras was performed with a sampling frequency as 200 Hz. Player's swing motion was divided into four events: starting motion (E1), backswing (E2), impact (E3), following (E4). For all upper joints, LSG showed greater angle differences between drop and smash motions than that of SG at E3 (p<.05). For all upper joints, greater angular velocities were found in SG than that of LSG. For both groups, significantly smaller angular velocities were found in drop motion than that of smash motion (p<.05). The greater sequential angular velocities (proximal to distal) were found in SG than LSG during smash motion. Based on our findings, performing the same motion between drop and smash would be related to enhance performance at badminton competition. It is expected that these results will be useful in developing a training program for enhancing performance of badminton athletes.

마그네슘열환원법을 이용한 실리콘-탄소 복합재 제조 및 리튬이차전지 음극재로의 이용 (Preparation of Silicon-Carbon Composite via Magnesiothermic Reduction Method and Its Application to the Anode Material for Lithium Ion Battery)

  • 김으뜸;권순형;김명수;정지철
    • 한국재료학회지
    • /
    • 제24권5호
    • /
    • pp.243-248
    • /
    • 2014
  • Silicon-carbon composite was prepared by the magnesiothermic reduction of mesoporous silica and subsequent impregnation with a carbon precursor. This was applied for use as an anode material for high-performance lithium-ion batteries. Well-ordered mesoporous silica(SBA-15) was employed as a starting material for the mesoporous silicon, and sucrose was used as a carbon source. It was found that complete removal of by-products ($Mg_2Si$ and $Mg_2SiO_4$) formed by side reactions of silica and magnesium during the magnesiothermic reduction, was a crucial factor for successful formation of mesoporous silicon. Successful formation of the silicon-carbon composite was well confirmed by appropriate characterization tools (e.g., $N_2$ adsorption-desorption, small-angle X-ray scattering, X-ray diffraction, and thermogravimetric analyses). A lithium-ion battery was fabricated using the prepared silicon-carbon composite as the anode, and lithium foil as the counter-electrode. Electrochemical analysis revealed that the silicon-carbon composite showed better cycling stability than graphite, when used as the anode in the lithium-ion battery. This improvement could be due to the fact that carbon efficiently suppressed the change in volume of the silicon material caused by the charge-discharge cycle. This indicates that silicon-carbon composite, prepared via the magnesiothermic reduction and impregnation methods, could be an efficient anode material for lithium ion batteries.

능형 피하경 피판을 사용한 사지부 화상후 구축성 함몰 Scar Band 재건 (Rhombus Subcutaneous Pedicle Skin Flap for Reconstruction of Linear Depressed Postburn Scar Band)

  • 김동철;김지훈;유성훈;신치호;이종건
    • 대한화상학회지
    • /
    • 제23권1호
    • /
    • pp.25-29
    • /
    • 2020
  • This paper presents our clinical experiences for reconstruction of the linear depressed postburn scar band by rhombus subcutaneous pedicle skin flap (RSPF). We report new RSPF, it's versatility, and effectiveness for correction of the mild to moderate linear depressed postburn scar band. To correct the postburn scar band, we have newly designed the Rhombus Subcutaneous Pedicle Skin Flap (RSPF), which is made as rhombus-shaped skin flap on the inside of scar band. After excision of burn scar band, the each vertex of RSPF flap is advanced into the skin defects at apex of extended skin incision, which is starting from the upper and lower portion of the removed burn scar band at a near right angle. This flap can add more extra skin to adjacent superior and inferior area of excised scar band. We have experienced 2 cases of RSPF for reconstruction of linear depressed postburn scar band deformities in lower extremity. After 3 weeks to 3 months postoperative follow ups, relatively satisfactory results were obtained in all cases. We had successfully reconstructed the linear depressed postburn scar postburn band of lower extremity using the rhombus subcutaneous pedicle skin flap. For the correction of mild to moderate sized linear depressed postburn scar band deformities in extremity, the RSPF is simple, and very effective without donor morbidity.

Analytical and experimental exploration of sobol sequence based DoE for response estimation through hybrid simulation and polynomial chaos expansion

  • Rui Zhang;Chengyu Yang;Hetao Hou;Karlel Cornejo;Cheng Chen
    • Smart Structures and Systems
    • /
    • 제31권2호
    • /
    • pp.113-130
    • /
    • 2023
  • Hybrid simulation (HS) has attracted community attention in recent years as an efficient and effective experimental technique for structural performance evaluation in size-limited laboratories. Traditional hybrid simulations usually take deterministic properties for their numerical substructures therefore could not account for inherent uncertainties within the engineering structures to provide probabilistic performance assessment. Reliable structural performance evaluation, therefore, calls for stochastic hybrid simulation (SHS) to explicitly account for substructure uncertainties. The experimental design of SHS is explored in this study to account for uncertainties within analytical substructures. Both computational simulation and laboratory experiments are conducted to evaluate the pseudo-random Sobol sequence for the experimental design of SHS. Meta-modeling through polynomial chaos expansion (PCE) is established from a computational simulation of a nonlinear single-degree-of-freedom (SDOF) structure to evaluate the influence of nonlinear behavior and ground motions uncertainties. A series of hybrid simulations are further conducted in the laboratory to validate the findings from computational analysis. It is shown that the Sobol sequence provides a good starting point for the experimental design of stochastic hybrid simulation. However, nonlinear structural behavior involving stiffness and strength degradation could significantly increase the number of hybrid simulations to acquire accurate statistical estimation for the structural response of interests. Compared with the statistical moments calculated directly from hybrid simulations in the laboratory, the meta-model through PCE gives more accurate estimation, therefore, providing a more effective way for uncertainty quantification.

왕흥사 목탑의 복원 연구 (A Study on the Restoration of the Wangheungsa Temple's Wooden Pagoda)

  • 김경표;성상모
    • 건축역사연구
    • /
    • 제19권3호
    • /
    • pp.7-29
    • /
    • 2010
  • The form of the Wangheungsa Temple's wooden pagoda site is that of the traditional form of the wooden pagodas constructed during the Baekjae Period. Likewise, it is an important ruin for conducting research on the form and type of the wooden pagodas constructed during the Baekjae Period. In particular, the method used for the installation of the central pillar's cornerstone is a new technique. The purpose of this research is to restore the ruin of the Wangheungsa Temple's wooden pagoda of the Baekjae Period that remains at the Wangheungsa Temple's wooden pagoda site. Until now, research conducted on the wooden pagoda took place mostly centered on the Hwangryongsa Temple's wooden pagoda. Meanwhile, the reality concerning Baekjae's wooden pagoda is one in which there were not many parallel cases pertain to the design for restoration. This research paper wants to conduct academic examination of the Wangheungsa Temple's wooden pagoda to organize the intention of design and design process in a simple manner. This research included review of the Baekjae Period's wooden pagoda related ruins and the review of the existing wooden pagoda ruin to analyze the wooden pagoda construction technique of the era. Then, current status of the Wangheungsa Temple's wooden pagoda site is identified to define the characteristics of the wooden pagoda, and to set up the layout format and the measure to estimate the size of the wooden pagoda in order to design each part. Ultimately, techniques and formats used for the restoration of the wooden pagoda were aligned with the wooden pagoda of the Baekjae Period. Basically, conditions that can be traced from the current status of the Wangheungsa Temple site excavation using the primary standards as the standard. Wangheungsa Temple's wooden pagoda was designed into the wooden pagoda of the Baekjae's prosperity phase. The plane was formed into $3{\times}3$ compartments to design into three tier pagoda. The height was decided by factoring in the distance between the East-West corridors, size of the compartment in the middle, and the view that is visible from above the terrace when entering into the waterway. Basically, the origin of the wooden structure format is based on the Goguryeo style, but also the linkage with China's southern regional styles and Japan's ancient wooden pagoda methods was factored in. As for the format of the central pillar, it looks as if the column that was erected after digging the ground was used when setting up the columns in the beginning. During the actual construction work of the wooden pagoda, central pillar looks as if it was erected by setting up the cornerstone on the ground. The reason that the reclaimed part of pillar that use the underground central cornerstone as the support was not utilized, was because the Eccentric Load of the central pillar's cornerstone was factored in the state of the layers of soil piled up one layer at a time that is repeated with the yellow clay and sandy clay and the yellow clay that were formed separately with the $80cm{\times}80cm$ angle at the upper part of the central pillar's cornerstone was factored in as well. Thus, it was presumed that the central pillar was erected in the actual design using the ground style format. It is possible to presume the cases in which the reclaimed part of pillar were used when constructed for the first time, but in which central pillar was installed later on, after the supplementary materials of the underground column is corroded. In this case, however, technique in which soil is piled up one layer at a time to lay down the foundation of a building structure cannot be the method used in that period, and the reclamation cannot fill up using the $80cm{\times}80cm$ angle. Thus, it was presumed that the layers of soil for building structure's foundation was solidified properly on top of the central pillar's cornerstone when the first wooden pagoda construction work was taking place, and that the ground style central pillar was erected on its upper part by placing the cornerstone once again. Wangheungsa Temple's wooden pagoda is significant from the structure development aspect of the Korean wooden pagodas along with the Hwangryongsa Temple's wooden pagoda. Wangheungsa Temple's wooden pagoda construction technique which was developed during the prosperity phase of the Baekjae Period is presumed to have served as a role model for the construction of the Iksan Mireuksa Temple's wooden pagoda and Hwangryongsa Temple's wooden pagoda. With the plan to complement the work further by excavating more, the basic wooden pagoda model was set up for this research. Wangheungsa Temple's wooden pagoda was constructed as at the Baekjae Kingdom wide initiative, and it was the starting point for the construction of superb pagoda using state of the art construction techniques of the era during the Baekjae's prosperous years, amidst the utmost interest of all the Baekjae populace. Starting out from its inherent nature of enshrining Sakyamuni's ashes, it served as the model that represented the unity of all the Baekjae populace and the spirit of the Baekjae people. It interpreted these in the most mature manner on the Korean peninsula at the time.

골격성 III급 부정교합자에서 중심위 변위가 두부 방사선 계측치에 미치는 영향 (The effect of CR-CO discrepancy on cephalometric measurements in Class III malocclusion patients)

  • 박양수;김종철;황현식
    • 대한치과교정학회지
    • /
    • 제26권3호
    • /
    • pp.255-265
    • /
    • 1996
  • 본 연구는 III급 부정교합자에서 중심교합상태의 두부 방사선 사진과 MPI 수치를 이용하여 중심위로 전환한 두부 방사선 사진(Centrically related cephalometrics)을 계측하여 중심위 변위시 유의한 계측치 변화가 있는지 확인하고자 시행되었다. 교정치료의 경험이 없는 25명의 III급 부정교합군과 25명의 정상교합군을 대상으로 하여, 중심교합위 상태의 측모 두부 방사선 사진과 중심위 및 중심교합위 기록을 채득하고, 모형을 SAM II 교합기에 부착하였다. 중심위 변위 량은 MPI(Mandibular Position Indicator)를 이용하여 계측하였으며, MPI 수치와 중심교합위 상태의 측모 두부 방사선 사진의 투사도를 이용하여 Conversion work sheet상에서 중심위 전환을 시행하였다. 두부 방사선 계측 항목은 하악골의 위치와 관계되는 것을 선택하였다. 정상교합군과 III급 부정교합군에서 중심위와 중심교합위간의 계측치 변화를 연구하여 다음과 같은 결과를 얻었다. 1. 하악 과두에서의 중심위 변위량은 정상교합군에서 전후방 변위량$({\Delta}X)0.56{\pm}0.50mm$, 수직적 변위량$({\Delta}Z)-0.61{\pm}0.53mm$였으며, III급 부정교합군에서 전후방 변위량$({\Delta}X)0.93{\pm}0.77mm$, 수직적 변위량$({\Delta}Z)-0.64{\pm}0.89mm$로, 두군 모두 후하방 변위양상을 나타냈다. III급 부정교합군에서 정상교합군보다 전후방 변위량이 더 크게 나타났으나 통계학적인 유의성은 없었다. 2. 중심교합위와 중심위 두부 방사선 사진의 계측치를 비교해 본 결과 정상교합군에서 ANB, Facial angle, Facial convexity, ODI 둥의 항목이 유의한 차이를 나타냈다. III급 부정교합군에서는 ANB, Facial angle, Facial convexity, ODI, SNB, APDI, L1-FP 등 유의한 차이를 보이는 항목이 더 많았고 유의성도 더 높게 나타났다. 3. 두부 방사선 사진의 계측치 변화는 중심위 변위와는 연관성이 있었으나, 정상교합군과 III급 부정교합군에 대한 연관성이 없었다. 이상의 결과는 중심위 변위량이 임상적으로 재현할 수 있는 중심위 위치에서 정상적으로 변위되는 양보다 큰 경우 중심위는 교정 환자에서 적절한 진단과 치료 계획 수립을 위한 기준 점으로 고려되어야 함을 시사하였다.

  • PDF

상지(上肢) 외전위(外轉位)에서 시행(施行)한 쇄골상(鎖骨上) 상완신경총차단(上腕神經叢遮斷) (Supraclavicular Brachial Plexus block with Arm-Hyperabduction)

  • 임권;임화택;김동권;박오;김성열;오흥근
    • The Korean Journal of Pain
    • /
    • 제1권2호
    • /
    • pp.214-222
    • /
    • 1988
  • With the arm in hyperabduction, we have carried out 525 procedures of supraclavicular brachial plexus block from Aug. 1976 to June 1980, whereas block with the arm in adduction has been customarily performed by other authors. The anesthetic procedure is as follows: 1) The patient lies in the dorsal recumbent position without a pillow under his head or shoulder. His arm is hyperabducted more than a 90 degree angle from his side, and his head is turned to the side opposite from that to be blocked. 2) An "X" is marked at a point 1 cm above the mid clavicle, immediately lateral to the edge of the anterior scalene muscle, and on the palpable portion of the subclavian artery. The area is aseptically prepared and draped. 3) A 22 gauge 3.5cm needle attached to a syringe filled with 2% lidocaine (7~8mg/kg of body weight) and epineprine(1 : 200,000) is inserted caudally toward the second portion of the artery where it crosses the first rib and parallel with the lateral border of the muscle until a paresthesia is obtained. 4) Paresthesia is usually elicited while inserting the needle tip about 1~2 em in depth. If so, the local anesthetic solution is injected after careful aspiration. 5) If no paresthesia is elicited, the needle is withdrawn and redirected in an attempt to elicit paresthesia. 6) If, after several attempts, no paresthesia is obtained, the local anesthetic solution is injected into the perivascular sheath after confirming that the artery is not punctured. 7) Immediately after starting surgery, Valium is injected for sedation by the intravenous route in almost all cases. The age distribution of the cases was from 11 to 80 years. Sex distribution was 476 males and 49 females (Table 1). Operative procedures consisted of 103 open reductions, 114 skin grafts combined with spinal anesthesia in 14, 87 debridements, 75 repairs, i.e. tendon (41), nerve(32), and artery (2), 58 corrections of abnormalities, 27 amputations above the elbow (5), below the elbow (3) and fingers (17), 20 primary closures, 18 incisions and curettages, 2 replantations of cut fingers. respectively (Table 2). Paresthesia was obtained in all cases. Onset of analgesia occured within 5 minutes, starting in the deltoid region in almost all cases. Complete anesthesia of the entire arm appeared within 10 minutes but was delayed 15 to 20 minutes in 5 cases and failed in one case. Thus, our success rate was nearly 100%. The duration of anesthesia after a single injection ranged from $3\frac{1}{2}$ to $4\frac{1}{2}$, hours in 94% of the cases. The operative time ranged from 0.5 to 4 hours in 92.4% of the cases(Table 3). Repeat blocks were carried out in 33 cases when operative times which were more than 4 hours in 22 cases and the others were completed within 4 hours (Table 4). Two patients of the 33 cases, who received microvasular surgery were injected twice with 2% lidocaine 20 ml for a total of $13\frac{1}{2}$ hours. The 157 patients who received surgery on the forearms or hands had pneumatic tourniquets (250 torrs) applied without tourniquet pain. There was no pneumothorax, hematoma or phrenic nerve paralysis in any of the unilateral and 27 bilateral blocks, but there was hoarseness in two, Horner's syndrome in 11 and shivering in 7 cases. No general seizures or other side effects were observed. By 20ml of 60% urcgratin study, we confirm ed the position of the needle tip to be in a safer position when the arm is in hyperabduction than when it is in adduction. And also that the humoral head caused some obstraction of the distal flow of the dye, indicating that less local anesthetic solution would be needed for satisfactory anesthesia. (Fig. 3,4).

  • PDF

현장실험을 통한 저진동·저소음 진폭가변형 진동해머 성능 평가 (Performance Evaluation of the Vibro Hammer with Variable Amplitude by Field Tests)

  • 한진태;이준용;최창호;박정열
    • 한국지반신소재학회논문집
    • /
    • 제14권3호
    • /
    • pp.1-12
    • /
    • 2015
  • 국내외에서 차수벽이나 흙막이 벽체로 많이 사용되고 있는 강널말뚝의 관입시 일반적으로 진동해머를 이용하여 시공하고 있다. 진동해머 중에서도 유압식 진동해머가 많이 사용되고 있는데, 진동해머의 시동을 켜고 끌 경우 진동해머 편심축의 이동에 따라 고유진동수의 변화로 진동해머에서 공진이 일어나 진동 및 소음이 크게 발생하는 문제점이 있다. 이에 본 연구에서는 일반 유압식 진동해머에서 발생하는 공진 발생에 의한 진동 및 소음을 줄이기 위하여 진폭가변형 유압진동해머를 개발하였다. 개발된 진폭가변형 유압진동해머는 두 쌍의 편심체 수평 각도를 조절하여 진동수 및 진폭을 조절할 수 있으며, 일반 유압식 진동해머와 개발된 진폭가변형 유압진동해머의 기진체 현장실험을 이용한 성능 평가 비교를 통해, 기존 일반 유압식 진동해머에 비해 진폭가변형 유압진동해머의 진동 및 소음이 감소함을 확인하였다. 또한 현장실험 결과 진폭가변형 유압진동해머는 굴삭기의 추력으로 인해 기존 전기식 진동해머에 비해 관입속도가 증가하였으며, 일반 유압식 진동해머에 비해서도 진폭가변으로 지반조건에 따라 관입속도가 빨라질 수 있음을 확인하였다.