• Journal of Engineering Education Research
• /
• v.21 no.6
• /
• pp.35-43
• /
• 2018

In many universities, the Capstone Design course aims to educate creativity, teamwork and leadership, and ultimately aims to cultivate practitioners with practical ability required in the industry. Since the introduction of capstone design as a regular course, it has spread not only to engineering but also to the humanities and social sciences. A typical capstone design is usually carried out within a limited range of schedules and budgets within the scope of a major and a subject. In the case of a special-purpose capstone design, it is necessary to find out excellent items aiming at start-up and commercialization at an early stage, It contributes to the achievement of international convention participation, start-up and commercialization. The teaching styles of capstone design such as multidisciplinary capstone design, fusion capstone design, and global capstone design are developed and operated in various ways. Depending on each type, objectives, curriculum, scope of participation, operation method, performance and so on. In the case of capstone design, it is contributing to increase the achievements such as participation in international conventions, establishment of business and commercialization by early detection of excellent items aiming at start-up and commercialization, development and establishment of support process. Technological and Humanities Convergence Capstone Design Moel is named as the process of designing a four-level idea called "Idea Factory-based Technology-Humannities Fusion Capstone Design Process", and it is used to generate ideas, elaborate ideas, advanced ideas, and commercialization.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.509-516
• /
• 2015

Intangibility, measurement difficulty and irreversibility, which are the characteristics of service, have such problems as obscurity and uncertainty in quality evaluation. Technical entrepreneurship education, a sort of public service, also contains such characteristics of service. To objectively evaluate the service quality of technical entrepreneurship education, this paper drew up factors as hierarchical structure, centered on FAHP technique, and conducted pre-processing, inputted those factors into triangular fuzzy number fuzzy judgement matrix, and calculated their weights. In this manner, this paper proposed a TESE system, through which an analysis can be conducted by drawing relative importance and priorities of the factors. The proposed system can efficiently evaluate the qualitative technical start-up education service quality factors quantitatively in the diversely changing technical start-up environment in view of the highest result quality (41%), which means performance in the relative importance of major factors. Namely, this paper confirmed that clear decision making can be made through an experiment.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.103-114
• /
• 2012

The study is analyzed that policy support impact on youth entrepreneurship and to purpose enhancing the effectiveness of the policy support, would like to empirical study on support performance by start-up support program through education level of the founder, performance of the establishment enterprises and an empirical study of start-up support. This study reported that start-up support should be different from impact of performance of support by young founder to participate in the success of entrepreneurship incubator package or preliminary young founders and is focused on study of policy support. Examines the literature of associated young founder's characteristics and entrepreneurship support policies at domestic and foreign, and the government's support policies in order to achieve the purpose of this study, survey research as the basis of the model was set. This study surveyed to university student which were trained nationwide entrepreneurship program in order to validate the research model. The survey targeted engineering students who is practical technology foundation possible during from June 1, 2012 to June. 15, 2012, the way of data collection was directly surveryed to engineering students who participated in the entrepreneurship program. and an empirical analysis were collected each 157 call.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.77-86
• /
• 2014

By PISA 2007, TIMSS 2011, Korean high school students had high academic achievement to science and mathematics, while they had low attitude. Prospective college students are increasingly avoiding natural science and engineering. Moreover, the opportunities to learn to computer science in middle and high school are disappeared rapidly. The necessity of STEAM program based on Physical computing arise under these situation. Therefore, we developed STEAM program and studied the effects of the program in 2012. The result showed that students' scientific interests and attitude, scientific problem solving ability, scientific creative problem solving ability, personality test for children, and satisfaction of school life were enhanced. This study is follow-up study for the same students who improved every domain of the measurements. They were administerd pre-test at start of 2012, post-test at end of 2012, and delayed post-test at the end of 2013, on same test. The result of the study showed that only attitude to Scientific Inquiry was enhanced, but there was no significant result on the other domain of the test in comparison with start of 2012. But this result demonstrate the effect of STEAM education conversely.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2710-2716
• /
• 2015

Startup in the aging society is much harder than finding employment. However, we did an experimental research that the elderly are able to develop in the field of IoT via this education. Through this IT startup education, those people who can do develop and implement and they are able to start new business by develop new item. Installing education between hardware and software about Arduino and Scratch's methods have great effect on IT startup education for the elderly before solving problem which have existing programming education. While the IT startup education through IoT is more difficult subject compared to general education subject, this paper shows an easily accessible research outcome for the elderly through startup education. This paper proved that practical uses through the results.

• International Journal of Highway Engineering
• /
• v.19 no.4
• /
• pp.69-78
• /
• 2017

PURPOSES : In this study, we analyzed the road crossing behavior of older pedestrians on a mid-block signalized crosswalk, and compared it to that of younger pedestrians. In addition, we analyzed the correlation between accidents involving older pedestrians while crossing roads and their behavioral characteristics. Finally, we confirmed the reasons for an increase in accidents involving older pedestrians. METHODS : First, 30 areas with the highest incidence of accidents involving older pedestrians while crossing roads were selected as target areas for analysis. Next, we measured the start-up delay (the time elapsed from the moment the signal turns green to the moment the pedestrian starts walking) and head movement (the number of head turns during crossing a road) of 900 (450 older and 450 younger) pedestrians. The next step was to conduct a survey and confirm the differences in judgment between older and younger pedestrians about approaching vehicles. Finally, we analyzed the correlation between the survey results and traffic accidents. RESULTS : The average start-up delay and head movement of the older pedestrians was 1.58 seconds and 3.15 times, respectively. A definite correlation was obtained between head movement and the frequency of pedestrian traffic accidents. The results of our survey indicate that 17.3% of the older pedestrians and 7.8% of the younger pedestrians have a high crash risk. CONCLUSIONS : Behavioral characteristics of older pedestrians were closely correlated with accidents involving older pedestrians while crossing roads in mid-block signalized crosswalks. Our study indicates that in order to reduce the number of accidents involving older pedestrians, it is necessary to develop an improvement plan including measures such as installation of safety facilities taking the behavioral characteristics of older pedestrians into consideration and their safety education.

• Journal of Engineering Education Research
• /
• v.13 no.5
• /
• pp.41-48
• /
• 2010

In this paper, we proposed "Future Design and Success Engineering in Global Society by Self-Innovation" (an abbreviated name: FDSE). We started to make a small experiment between Korea Maritime University and Yamagata University at the current year. After inspecting the results, especially, successful and unsuccessful points in our lecture, we have to develop the strong points and amend the week points, through making the analysis of success-failure, which is his favorite management method. We have to level up the contents of our work in the future. The students for this lecture would learn from experiences of "the common knowledge (common field of discussion)", held common languages, common thought, common system. They filled up the blanks of "The Matrix Frame" which is mentioned in the previous report, and they expressed their own way of life (work, study). As a matter of course, their personal private affairs must not be made public. It is quite happy that the cultural, economical exchanges between Korea and Japan are now in full flourish and people do a lot of traveling each other. However, if this project will start on the educational global standard, we have a world-wide significance. Moreover, we can promote goodwill between Korea and Japan, and also we can contribute to a better international understanding and the peace of the world by students in both Universities. We hope that candidates for this lecture will have a rounded personality and be a life worthy of human being for realizing Self-Actualization in "Motivation and Personality" by Abraham Maslow.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.133-143
• /
• 2018

The purpose of this study is to investigate the reasons for preferring employment and the social influencing factors to improve future entrepreneurial intentions. Especially, this study investigates the influence of social influences such as parents', acquaintances, and individuals' experience of start - ups and employment and entrepreneurship club experiences on career choice of students who prefer employment. For this purpose, qualitative research method was applied to students who selected entrepreneurship career course among college students who completed entrepreneurship education. The results of this study are as follows: stable income, system experience, preference for parents' employment, lack of funds and lack of knowledge on start-ups. In addition, it was found that the intention of start-up is increased according to the experience of start-up of the acquaintance among the social influences of students who prefer employment. The result of this study suggests the methodology and learning direction of entrepreneurship education which can improve entrepreneurship intention and understanding of university students. In addition, this study proposes future research related to entrepreneurship education through empirical analysis.

• Journal of Engineering Education Research
• /
• v.26 no.2
• /
• pp.3-22
• /
• 2023

The purpose of universities is diversifying, such as education and research for the transfer of knowledge and technology, and training talented people with the competencies required in industrial sites. Therefore, universities are attempting various forms of industry-academic cooperation to maintain organic relations with companies and to conduct research activities, technology sharing, technology development, technology transfer, and human resources training. In particular, in the field of engineering education, various industry-academic cooperation programs such as field training, interns, and start-up support are actively developed and operated. Accordingly, the Engineering Education Innovation Research Information Center developed an online industry-academic cooperation capstone design matching platform for engineering education to enable collaboration between universities and companies nationwide. The industry-academic cooperation matching platform was developed under the theme of capstone design. Capstone design is a project-oriented and problem-based learning method that combines the knowledge and experiences acquired by the undergraduate department and designs and produces them. The subject of the Capstone design project was to solve corporate difficulties and allow companies and universities to collaborate. This study developed an online industry-academic cooperation capstone design matching platform according to analysis, design, development, evaluation, and execution procedures. This study is meaningful in that it has developed a channel through which students and companies, who are the subjects of industry-academic cooperation, can carry out projects and communicate organically through an online matching platform.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.61-72
• /
• 2020

Entrepreneurship works as a driving force in socio-economic innovation, the leading role in job creation and economic development. As the importance of entrepreneurship is increased, research on entrepreneurship training methods based on the capability model is vitalized in order to effectively develop entrepreneurship in the EU and OECD. In Korea, however, the research on entrepreneurship capability is nearly not proceeding while the outcome of entrepreneurship training is insufficient. The research, therefore, invented the entrepreneurship training model at K university after analyzing cases of entrepreneurship training from inside and outside of the country followed up through the theoretical consideration of entrepreneurship capability and collecting suggestions from experts. The training model rejects the existing economics-based theory education, focuses on the development of entrepreneurship capability, and suggests an educational process considering students' developing stage of entrepreneurship capabilities.