• Title/Summary/Keyword: Start-up delay

검색결과 50건 처리시간 0.021초

A Reset-Free Anti-Harmonic Programmable MDLL-Based Frequency Multiplier

  • Park, Geontae;Kim, Hyungtak;Kim, Jongsun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권5호
    • /
    • pp.459-464
    • /
    • 2013
  • A reset-free anti-harmonic programmable multiplying delay-locked loop (MDLL) that provides flexible integer clock multiplication for high performance clocking applications is presented. The proposed MDLL removes harmonic locking problems by utilizing a simple harmonic lock detector and control logic, which allows this MDLL to change the input clock frequency and multiplication factor during operation without the use of start-up circuitry and external reset. A programmable voltage controlled delay line (VCDL) is utilized to achieve a wide operating frequency range from 80 MHz to 1.2 GHz with a multiplication factor of 4, 5, 8, 10, 16 and 20. This MDLL achieves a measured peak-to-peak jitter of 20 ps at 1.2 GHz.

스위치드 릴럭턴스 모터의 센서리스제어를 위한 전압펄스주입 알고리즘 (Sensorless Control of Switched Reluctance Motor Using Impressed Voltage Pulse Algorithm)

  • 윤용호;정균하;이태원;원충연;김지원
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2005년도 전력전자학술대회 논문집
    • /
    • pp.33-35
    • /
    • 2005
  • We propose an improved sensorless drive method of Switched Reluctance Motors using impressed voltage pulses. Conventional impressed voltage pulse method has a problem of phase delay because of low -pass filter. So In this paper we propose an unproved sensorless driving method based on the impressed voltage pulse using new phase-shift circuit technique that overcomes the phase delay and start-up problem.

  • PDF

초기공정에서 공정변화에 대한 신경망을 이용한 관리도 형태 연구 (A study on the control chart pattern for detecting shifts using neural network in start-up process)

  • 이희춘
    • 한국산업정보학회논문지
    • /
    • 제6권3호
    • /
    • pp.65-70
    • /
    • 2001
  • 이 논문에서는 초기공정에서 개별관측치를 이용하여 공정변화를 지적하는 효율적인 관리도 패턴을 제시한다. 신경망 모델을 적용한 공정관리 기법이 부분적으로 통계적이거나 다른 분석기법보다 우월하지 않을 수도 있지만 학습된 자료관계는 분석적 가정이나 잘못된 모수 때문에 발생되는 오류를 평가할 수 있는 능력이 있으므로 완벽한 공정관리 모델을 추구할 수 있다. 이 논문에서는 BP 알고리즘을 사용하며, 신경망을 이용한 관리도는 작은 공정변화에 특히 예민하다. 공정관리에 영향을 주는 최적의 모수를 구하는 유용한 방법이 신경망을 이용하는 방법임을 제시하며 신경망을 이용한 관리도와 X, EWMA 관리도 비교를 위해 평균 런의 길이를 이용한다.

  • PDF

양팔 클러스터장비의 초기 전이 기간 스케줄링 (Scheduling Start-up Transient Periods of Dual Armed Cluster Tools)

  • 홍경효;김자희
    • 한국시뮬레이션학회논문지
    • /
    • 제24권3호
    • /
    • pp.17-26
    • /
    • 2015
  • 생산성과 웨이퍼의 품질을 향상하기 위해 다양한 공정에서 사용되는 클러스터 장비는 단순한 구성에도 불구하고 병렬 공정모듈, 중간버퍼의 부재, 시간 제약 때문에 스케줄이 쉽지 않다. 그래서 스케줄링에 대한 많은 연구가 진행되었지만 대부분 시간이 변동되지 않는다는 가정 하에서 주기별로 동일한 스케줄이 반복되는 안정 상태를 연구하였다. 본 연구에서는 시간 제약을 만족시키면서도 원하는 안정 상태의 스케줄로 안착할 수 있는 스케줄 전략을 제시한다. 제안된 스케줄 전략은 작업시간이 지속적으로 변동되는 상황에서도 강건하다. 마지막으로 이 전략들이 실제로 강건하고, 원하는 안정 상태로 갈 수 있다는 것을 보여주기 위하여 시뮬레이션을 수행한다.

동적 블록수송환경을 위한 네트워크 흐름모형 기반의 트랜스포터 일정계획 (Transporter Scheduling Based on a Network Flow Model for Dynamic Block Transportation Environment)

  • 이운식;임원일;구평회
    • 산업공학
    • /
    • 제22권1호
    • /
    • pp.63-72
    • /
    • 2009
  • This paper considers a transporter scheduling problem under dynamic block transportation environment in shipbuilding. In dynamic situations, there exist the addition, cancellation or change of block transportation requirements, sudden breakdowns and maintenance of transporters. The transportation of the blocks in the shipyard has some distinct characteristics. Some blocks are available to be picked up at a specific time during the planning horizon while some other blocks need to be delivered before a specific time. These requirements cause two penalty times: 1) delay times incurred when a block is picked up after a required start time, and 2) tardy times incurred when a block shipment is completed after the required delivery time. The blocks are located at different areas in the shipyard and transported by transporters. The objective of this paper is to propose a heuristic algorithm based on a network flow model which minimize the weighted sum of empty transporter travel times, delay times, and tardy times. Also, a rolling-horizon scheduling method is proposed for dynamic block transportation environment. The performance of the proposed heuristic algorithms are evaluated through a simulation experiment.

동적 블록수송환경을 위한 트랜스포터 일정계획 (Transporter Scheduling for Dynamic Block Transportation Environment)

  • 이운식;임원일;구평회;주철민
    • 산업공학
    • /
    • 제21권3호
    • /
    • pp.274-282
    • /
    • 2008
  • This paper considers a transporter scheduling problem under dynamic block transportation environment in shipbuilding. In dynamic situations, there exist the addition or cancellation of block transportation requirements, sudden breakdowns and maintenance of transporters. The transportation of the blocks in the shipyard has some distinct characteristics. Some blocks are available to be picked up at a specific time during the planning horizon while some other blocks need to be delivered before a specific time. These requirements cause two penalty times : 1) delay times incurred when a block is picked up after a required start time, and 2) tardy times incurred when a block shipment is completed after the required delivery time. The blocks are located at different areas in the shipyard and transported by transporters. The objective of this paper is to propose heuristic algorithms which minimize the weighted sum of empty transporter travel times, delay times, and tardy times. Four heuristic algorithms for transporter scheduling are proposed and their performance is evaluated.

Intelligent 2-DOF PID Control For Thermal Power Plant Using Immune Based Multiobjective

  • Kim, Dong-Hwa
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1371-1376
    • /
    • 2003
  • In the thermal power plant, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, Strictly maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature, the change of the dynamic characteristics in the reheater. Up to the present time, PID Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on tuning of the 2-DOF PID Controller on the DCS for steam temperature control using immune based multiobjective approach. The stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Therefore tuning technique of multiobjective based on immune network algorithms in this paper can be used effectively in tuning 2-DOF PID controllers.

  • PDF

플래시메모리 기반 컴퓨터시스템을 위한 고속 부팅 기법의 설계 및 성능평가 (Design and Evaluation of a Fast Boot-up Technique for Flash Memory based Computer Systems)

  • 임근수;김지홍;고건
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제32권11_12호
    • /
    • pp.587-597
    • /
    • 2005
  • 최근 플래시메모리에 기반한 내장형 컴퓨터시스템의 사용이 급증하고 있다. 이러한 내장형시스템은 일반적으로 빠른 부팅시간을 제공해야 한다 하지만 부팅과정에서 플래시메모리용 파일시스템을 초기화하는 마운팅 시간이 플래시메모리의 크기에 따라 1-25초가량 소요된다. 현재 플래시메모리 단일 칩의 용량은 매년 2배씩 증가하는 추세에 있기 때문에 플래시메모리용 파일시스템을 마운트하는 시간이 내장형 시스템의 부팅시간을 지연시키는 중요한 요인이 될 것이다. 본 논문에서는 플래시메모리용 파일시스템의 메타데이타를 언마운팅 시점에 플래시메모리에 기록하고 이후에 마운팅하는 시점에 빠르게 읽어 들임으로써 마운팅 시간을 크게 단축하는 메타데이타 스냅샷 기법들을 NOR형과 NAND형 플래시메모리의 특성에 맞춰 설계한다. 파일시스템이 정상적으로 언마운트되지 않은 경우에는 이를 자동으로 인식하고 빠르게 에러를 복구할 수 있는 새로운 기법들을 사용한다. 성능평가를 통해서 제안하는 기법들은 대표적인 플래시메모리용 파일시스템인 JFFS2와 비교하여 마운팅 시간을 100배가량 단축시킴을 보인다.

전압펄스 주입방식을 이용한 SRM 센서리스 제어 (Sensorless Driving System of Switched Reluctance Motor Using Impressed Voltage Pulse)

  • 윤용호;김연충;원충연
    • 전력전자학회논문지
    • /
    • 제10권4호
    • /
    • pp.388-396
    • /
    • 2005
  • SRM은 각종 산업분야에서 토크 리플과 소음 진동, 낮은 역률로 인하여 실제 적용에는 어려움이 있고 구동을 하기 위해서는 회전자위치 정보를 위한 센서가 필요하다. 따라서 본 논문에서는 전압펄스 주입방식을 이용한 센서리스 방식을 제안하였다. 기존 전압펄스 주입방식의 문제점인 위상지연 문제와 기존 센서리스 방식의 어려움이라 할 수 있는 초기구동 문제를 제안하였다. 또한 고성능 마이크로프로세서를 사용한 복잡한 연산과정 없이 단순한 범용 아날로그 소자만으로도 간단히 센서리스 방식을 구현하였다.

Adaptive Logarithmic Increase Congestion Control Algorithm for Satellite Networks

  • Shin, Minsu;Park, Mankyu;Oh, Deockgil;Kim, Byungchul;Lee, Jaeyong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권8호
    • /
    • pp.2796-2813
    • /
    • 2014
  • This paper presents a new algorithm called the adaptive logarithmic increase and adaptive decrease algorithm (A-LIAD), which mainly addresses the Round-Trip Time (RTT) fairness problem in satellite networks with a very high propagation delay as an alternative to the current TCP congestion control algorithm. We defined a new increasing function in the fashion of a logarithm depending on the increasing factor ${\alpha}$, which is different from the other logarithmic increase algorithm adopting a fixed value of ${\alpha}$ = 2 leading to a binary increase. In A-LIAD, the ${\alpha}$ value is derived in the RTT function through the analysis. With the modification of the increasing function applied for the congestion avoidance phase, a hybrid scheme is also presented for the slow start phase. From this hybrid scheme, we can avoid an overshooting problem during a slow start phase even without a SACK option. To verify the feasibility of the algorithm for deployment in a high-speed and long-distance network, several aspects are evaluated through an NS-2 simulation. We performed simulations for intra- and interfairness as well as utilization in different conditions of varying RTT, bandwidth, and PER. From these simulations, we showed that although A-LIAD is not the best in all aspects, it provides a competitive performance in almost all aspects, especially in the start-up and packet loss impact, and thus can be an alternative TCP congestion control algorithm for high BDP networks including a satellite network.