• Journal of Korean Neurosurgical Society
• /
• 제51권1호
• /
• pp.20-23
• /
• 2012

Objective : To compare radiographic analysis on the sagittal lumbar curve when standing, sitting on a chair, and sitting on the floor. Methods : Thirty asymptomatic volunteers without a history of spinal pathology were recruited. The study population comprised 11 women and 19 men with a mean age of 29.8 years. An independent observer assessed whole lumbar lordosis (WL) and segmental lordosis (SL) between L1 and S1 using the Cobb's angle on lateral radiographs of the lumbar spine obtained from normal individuals when standing, sitting on a chair, and sitting on the floor. WL and SL at each segment were compared for each position. Results : WL when sitting on the floor was reduced by 72.9% than the average of that in the standing position. Of the total decrease in WL, 78% occurred between L4 to S1. There were significant decreases in SL at all lumbar spinal levels, except L1-2, when sitting on the floor as compared to when standing and sitting on a chair. Changes in WL between the positions when sitting on a chair and when sitting on the floor were mostly contributed by the loss of SL at the L4-5 and L5-S1 levels. Conclusion : When sitting on the floor, WL is relatively low; this is mostly because of decreasing lordosis at the L4-5 and L5-S1 levels. In the case of lower lumbar fusion, hyperflexion is expected at the adjacent segment when sitting on the floor. To avoid this, sitting with a lordotic lumbar curve is important. Surgeons should remember to create sufficient lordosis when performing lower lumbar fusion surgery in patients with an oriental life style.

• Journal of Fashion Business
• /
• 제17권1호
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2069-2079
• /
• 2004

This paper represents the description of a complex mathematical model of biomechanical interaction for human-rifle system during shooting. The model is developed by finite element method using bar elements. And three typical shooting positions, i.e. standing, kneeling and prone are used. Characteristics of interior/exterior ballistics and behaviors of human-rifle system are evaluated by this model, which takes into account the influence of environment, bullet, powder, barrel geometry parameters and anthropological parameters. The results of this study can be applied to anthropology, biomechanics, medical science, gait analysis, interior ballistics and exterior ballistics.

• The Journal of Korean Physical Therapy
• /
• 제25권3호
• /
• pp.143-148
• /
• 2013

Purpose: The purpose of this study was to investigate whether changes in electromyography (EMG) activations of spinal stability muscles with respiratory demand change were due to changes in respiratory demand or in postural demand. Methods: Forty healthy subjects (19male, 21female, $20.8{\pm}1.9$years old) performed quiet breathing and four different forced respiratory maneuvers (FRM) (Pulsed Lip Breathing, Diaphragmatic Breathing, Combination breathing, and respiratory muscle endurance training breathing) while in sitting and standing positions. EMG data for four muscles (TrA/IO, EO, RA, and ES) were collected and filtered using a band pass filter (20~200Hz) and a notch filter (60, 120, 180Hz). Results: There were no significant differences on percentage of change on %MVIC between QB and FRM (PLB, CB, DB, and RMET) between positions (all p>0.05).

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.210-215
• /
• 1999

The standing waves of the fourth bending ode of vibration and the first longitudinal mode of vibration were utilized to construct a ultrasonic linear motor. The geometrical dimensions of the vibrator were determined by Euler-Bernoulli theory. FEM(finite element method) employed to calculate the vibration mode of the metal-piezoceramic composite thin plate vibrator. ANSYS was used to design positions of the projections and calculate displacement of vibrator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.300-302
• /
• 1999

The standing waves of the fourth bending mode of vibration and first longitudinal mode of vibrator were utilized to construct a ultrasonic linear motor. The geometrical dimensions of the vibrator were determined by Euler-Bernoulli theoty. FEM(finite element method) employed to calculate the vibration mode of the metal-piezoceramic composite thin plate vibrator. ANSYS was used to design positions of the projections and calculate displacement of vibrator.

• Journal of Korean Physical Therapy Science
• /
• 제20권1호
• /
• pp.43-49
• /
• 2013

Background and purpose : The shoulder joints permit the greatest mobility of any joint area carries out the important function of stabilization for hand use. Research has now shown that grip strength has proven to be a reliable indicator for quality of life at an older age. The purpose of this study was to investigate the effects of testing posture and shoulder position on grip strength for repetitive gripping task. Methods : Forty(20male, 20female) college adult volunteers with no known shoulder dysfunction participated subject in two testing posture(sitting and standing) and three positions with shoulder flexion: (1) shoulder $0^{\circ}$ flexion (2) shoulder $90^{\circ}$ flexion (3) shoulder $180^{\circ}$ flexion. The paired t-test was used to determine any significant difference in grip strength between the testing posture and shoulder position. Results : The higher grip strength gained in the sitting with the shoulder $180^{\circ}$ flexion and the higher grip strength gained in the standing with the shoulder $180^{\circ}$ flexion. The second experiment showed that the grip strength was significant for sitting, standing position of shoulder $0^{\circ}$ flexion( p<0.05). Grip strength goes up as increase height and weight. Conclusion : These findings demonstrate that the theory does not fit with, because of the influence of gravity, a measure from the shoulder joint is the most high, $0^{\circ}$. And sitting posture and stance in the grip of a difference when compared SIT $0^{\circ}$ and standing position $0^{\circ}$ significant difference in indicated but, $90^{\circ}$ and $180^{\circ}$ in the sitting position and stance in the grip of the difference was not significant difference. To demonstrate the universality of this study's results, future studies should have a larger and more subject as well as a more even distribution of male and female subject. Therefore future research is needed to refine the definition and identify optimal methods of measuring this grip strength.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.136-144
• /
• 2022

Objective: This study was to identify the effect of pressure biofeedback applied in various postures that allow the application of abdominal drawing-in. Design: A cross sectional study. Methods: The study intended to compare changes in the thickness of abdominal muscles between different postures when abdominal drawing-in was performed using a pressure biofeedback unit in five postures and to compare differences in terms of measures such as the transverse abdominis's preferential activation ratio(PAR). Data measured from 30 healthy individuals were used for data analysis. A paired t-test and repeated measures analysis of variance was performed to compare the thickness of each abdominal muscle. Results: The transverse abdominis's and internal oblique's thickness showed statistically significant differences in all postures when abdominal drawing-in (p<0.05). In the comparison between the postures, statistically significant differences were observed between the positions of hook-lying and wall support standing and between supine and wall support standing and between hook-lying and sitting (p<0.05). In terms of the transverse abdominis's PAR in each posture, statistically significant differences were observed between hook-lying and quadruped, hook-lying and sitting, hook-lying and wall support standing, quadruped and supine, sitting and supine, as well as wall support standing and supine (p<0.05). Conclusions: When abdominal drawing-in using pressure biofeedback unit is performed for stabilization exercises, selecting and applying specific postures according to targeted muscles and the subject's functional ability will help provide a more efficient and accurate intervention.

• Korean Journal of Oriental Medicine
• /
• 제16권1호
• /
• pp.157-171
• /
• 2010

This study aimed to investigate the effect of four common types of Qigong position (standing, sitting, supine, and horse-riding position) on the autonomic nervous system. Thirty healthy subjects participated in this study once a week for four weeks. Electroencephalogram (EEG) was measured three times (before, during, and after the position) while the subject maintained one of four positions for ten minutes. There were significant changes in HRV components compared with EEG power spectra in the standing position. Especially, the ratio of low-to-high frequency (LF/HF) which represents a state of balance of autonomic nervous system was increased. In the sitting position, $\beta$ wave which reflects a state of alert consciousness was increased and both the sympathetic and parasympathetic nerves were activated. On the other hand, in the spine position, $\theta$ wave which signifies a state of relaxation was increased and heart rate (HR) was decreased. Activation of sympathetic and parasympathetic nerves was also observed in this position. Significant increases of indices related to awakening and concentration were observed accompanied by increase of HR and a sympathetic nerve was activated in the riding-horse position. In the present study, it was shown that each Qigong position caused various and significant changes in autonomic nervous system. It would be expected that these results can be applied in the choice of appropriate Qigong position according to objective of Qigong therapy although it is remained to further evaluate the effects of long-term maintenance of Qigong positions and repeated Qigong training.

• Korean Journal of Oriental Medicine
• /
• 제17권2호
• /
• pp.85-100
• /
• 2011

Objectives : This study aimed to investigate the effect of four common types of Qigong position (standing, sitting, supine, and horse-riding position) on the autonomic nervous system. Method : Thirty healthy subjects participated in this study once a week for four weeks. Heart Rate Variability (HRV) was measured three times (before, during, and after the position) while the subject maintained one of four positions for ten minutes. Result : There were significant changes HRV in the standing position. In the sitting position, both the sympathetic and parasympathetic nerves were activated. On the other hand, in the spine position, heart rate (HR) was decreased. Activation of sympathetic and parasympathetic nerves was also observed in this position. Significant increases of indices related to awakening and concentration were observed accompanied by increase of HR and a sympathetic nerve was activated in the riding-horse position. Conclusions : In the present study, it was shown that each Qigong position caused various and significant changes in autonomic nervous system. It would be expected that these results can be applied to choose appropriate Qigong position according to objective of Qigong therapy although it is remained to further evaluate the effects of long-term maintenance of Qigong positions and repeated Qigong training.