• 대한전기학회논문지:전력기술부문A
• /
• 제52권8호
• /
• pp.457-462
• /
• 2003

This paper presents an optimal operating strategy of distributed generation (DG) with reliability worth evaluation of distribution systems. Using DG for peak-shaving unit could reduce the overall system operating cost, and using DG for standby power unit could reduce the customer interruption cost. If DG operating cost is less than utility power cost in peak time, DG should be running to reduce the overall system operating cost. When customer interruption cost enlarges, however, standby power strategy may be the better operating strategy than peak-shaving strategy. Selection of whether DG should be operated for peak-shaving or for standby power, needs the accurate reliability worth evaluation and the accurate power cost evaluation. Instead of using annual average reliability worth, the concept of hourly reliability worth is introduced in this paper to determine the optimal operating decision of DG. Applying suggested hourly reliability worth, the distribution companies that possess DG could set up the optimal operating strategy of DG.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.691-701
• /
• 2019

To solve the problems in the contact charging of inspection robots, a wireless charging system for inspection robots and a control strategy are introduced in this paper. Circuit models of a wireless power system with a compound compensation circuit and a three-phase Class-D resonant inverter are set up based on circuit theory. An output voltage control method based on the equal spread regulation of the phase difference between adjacent phases and the parameter correction method in the primary compound compensation circuit are proposed. The dynamic characteristics of the key parameters varying with the secondary coil position are obtained to further investigate the adaptive location scheme during the access and exit processes of moving robots. Combining the output voltage control method and the adaptive location scheme, a transition control strategy for the standby and operation modes of the wireless charging systems for inspection robots is put forward to realize the system characteristics including the low standby power in the standby mode and the high receiving power in the operation mode. Finally, experiments are designed and conducted to verify the correctness of the theoretical research.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2840-2851
• /
• 2022

Electric boilers (EBs) are the backup steam source for the auxiliary steam system of high-temperature gas-cooled reactor nuclear power plants. When the plant is in normal operations, the EB is always in hot standby status. However, the current hot standby operation strategy has problems of slow response, high power consumption, and long operation time. To solve these problems, this study focuses on the optimization of hot standby operations for the EB system. First, mathematical models of an electrode immersion EB and its accompanying deaerator were established. Then, a control simulation platform of the EB system was developed in MATLAB/Simulink implementing the established mathematical models and corresponding control systems. Finally, two optimization strategies for the EB hot standby operation were proposed, followed by dynamic simulations of the EB system transient from hot standby to normal operations. The results indicate that the proposed optimization strategies can significantly speed up the transient response of the EB system from hot standby to normal operations and reduce the power consumption in hot standby operations, improving the dynamic performance and economy of the system.

• 한국국방경영분석학회지
• /
• 제24권1호
• /
• pp.98-109
• /
• 1998

This study develops a maintenance strategy for a reparable 2-unit standby system. The maintenance strategy implies the waiting time to call the repair facility when the unit-1 fails. Almeida and Souza set up the multi-attribute utility function consisting of system availability and repair cost for several maintenance strategies and decide the optimal maintenance strategy that maximize the expected value of the utility function. We decide the optimal maintenance strategy satisfying the following two criteria about the utility function : maximum variance using Almeida and Souza's utility function. It both criteria are not satisfied at the same time for every strategies, the strategy maximizing the lower confidence limit for expected utility function is regarded as an optimal one.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.486-492
• /
• 2013

Energy cost has been increasing rapidly to comply with environmental regulations worldwide and the manufacturing industry who consumes more than half of the total energy needs to improve their cost competitiveness considering environmental costs. Machine tools are essential elements in manufacturing industry and efforts have been made recently to increase their energy efficiency mainly by German and Japanese machine tool builders. In this paper, trends in energy saving technology are described on the hardware and software sides of peripheral equipment of machine tools. In addition, the power consumption of a machining center is measured and analyzed to develop a software-based standby strategy for energy saving with peripheral equipment of machine tools.

• 산업공학
• /
• 제25권2호
• /
• pp.153-162
• /
• 2012

The reliability is defined as a probability that a system will operate properly for a specified period of time under the design operating conditions without failure and it has been considered as one of the major design parameters in the field of industries. Reliability-Redundancy Optimization Problem(RROP) involves selec tion of components with multiple choices and redundancy levels for maximizing system reliability with constraints such as cost, weight, etc. However, in practice both active and cold standby redundancies may be used within a particular system design. Therefore, a redundancy strategy(active, cold standby) for each subsystem in order to maximize system reliability is considered in this study. Due to the nature of RROP, i.e. NP-hard problem, A Parallel Particle Swarm Optimization(PPSO) algorithm is proposed to solve the mathematical programming model and it gives consistently better quality solutions than existing studies for benchmark problems.

• 조명전기설비학회논문지
• /
• 제17권4호
• /
• pp.81-86
• /
• 2003

피크용 분산전원은 계통의 전체 운영비용을 줄일 수 있고, 대기용 분산전원은 수용가의 신뢰도를 향상시킬 수 있다. 피크용 분산전원과 대기용 분산전원은 해석하는데 있어서 다른 모델링을 세워야 하고 그에 따라 다른 방식으로 해석해야 하는데 이를 구현하기 위해서는 Monte-Carlo시뮬레이션 기법이 적합하다고 할 수 있다. 본 논문에서는 순차적 시뮬레이션 기법을 통해 두 가지 분산전원의 영향을 신뢰도 지수로 표현하고 이를 통해 두 가지 분산전원의 장단점을 살펴보도록 하겠다.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1469-1479
• /
• 2017

Primary-side regulation (PSR) scheme is widely applied in low power applications, such as cell phone chargers, network adapters, and LED drivers. However, the efficiency and standby power requirements have been improved to a high standard due to the new trends of DOE (Department Of Energy) Level VI and COC (Code Of Conduct specifications) V5. The major drawbacks of PSR include poor regulation due to inaccurate feedback and difficulty in acquiring acceptable regulation. A novel adaptive blanking strategy for constant current and constant voltage regulation is proposed in this paper. An accurate model for the sample blanking time related to transformer leakage inductance and the metal-oxide-semiconductor field-effect transistor (MOSFET) parasitic capacitance is established. The proposed strategy can achieve accurate detection for ultra-low standby power. In addition, numerous control factors are analyzed in detail to eliminate the influence of leakage inductance on the loop stability. A dedicated controller integrated circuit (IC) with a power MOSFET is fabricated to verify the effectiveness of the proposed control strategy. Experimental results demonstrated that the prototype based on the proposed IC has excellent performance.

• Journal of the Korean Statistical Society
• /
• 제7권1호
• /
• pp.61-80
• /
• 1978

This paper presents general solutions for stochastic square duels with continuous interfiring times and various firing strategies such as standby (S), concentrated (C), seperated (I) and random (R) firings. Analysis of these square duels with negative exponential interfiring times and equivalent values of rates of fire and single shot kill probabilities reveal three important facts: i) Strategy (C) is advantageous against the opponent's strategy (S) and the advantage becomes more pronounced for lower values of single shot kill probabilities. ii) Strategy (I) is always better than strategy (C) no matter which of (C) and (I) the opponent uses and its relative advantege increases to a quarter as single shot kill probabilities increase to one but decreases to zero as they go to zero. iii) However, strategy (I) has no advantage over strategy (C) for small values of single shot kill probabilities. In this paper, square duels with strategies (C) and (I) are based on the assumptions that duelists are homogeneous and both duelists of one side fire simultaneously. The problem of relaxing these assumptions and extension of square ($2 \times 2$) duels to more general ($m \times n) duels are now being investigated.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.281-282
• /
• 2011

본 논문에서는 휴대기기의 설계에서 전원절약기법에 대하여 연구하였다. 기존의 휴대형기기는 기능이 단순하고, 저 성능이였으나 점차 휴대형기기의 성능향상으로 고소비전력화 되고 있다. 본 논문에서는 주처리기와 대기모드 처리기를 사용하는 방안을 제안하고, 비교 검토하였다.