• 융합신호처리학회논문지
• /
• 제16권3호
• /
• pp.115-121
• /
• 2015

가정 및 사무실의 전기/전자 기기가 내부 혹은 외부로부터 주 기능 수행을 위한 명령을 기다리고 있는 상태에서 소모되는 대기전력을 차단할 수 있는 장치를 저가로 개발하였다. 대기전력을 줄이기 위한 노력이 선진국들뿐만 아니라 국제적 차원에서 경주되고 있다. 우리나라도 가구당 전자/전기기기 보유대수가 증가되는 추세에 따른 대기전력이 점차 증가하고 있어 전기 에너지 낭비의 큰 요인이 되고 있다. 기존의 대기전력 차단장치는 그 장치 자체의 소비전력이 크고, 구조가 복잡하여 사용 의미를 퇴색시키는 문제점을 안고 있다. 본 논문에서는 기존 제품의 이러한 문제점을 보완시키고 대기전력을 완전히 차단하는 저가형 대기전력 차단장치를 제안한다. 그리고 제안한 대기전력 차단장치를 누전차단기와 콘센트에 적용하여 회로를 설계 및 구현하고 실험을 통하여 그 우수성을 확인하였다.

• 무역상무연구
• /
• 제39권
• /
• pp.87-103
• /
• 2008

Two kinds of security devices such as independent guarantees and standby letters of credit have been widely used in the international transactions. These devices design to protect one of the parties from a breach by its counter-party. Main uses of these guarantees and standby letters of credit are as follows : bid guarantee, performance guarantee, advance payment guarantee, payment guarantee, retention guarantee, etc. The standby letters of credit were first invented in the U.S.A. and have been widely used in the international and domestic contracts in the U.S.A. But the practical use of these credits is very unsatisfactory in Korea. The purpose of this study is to serve the increase of practical use of the standby letters of credit in Korea through the comparison study on the practical use of the credits between Korea and the U.S.A. Both devices are very similar in function, but they are very different in forms. The one has the form of letter of credits but the other has the form of guarantee. The letter of credit has the stability of governing rule, the legal certainty, and the preference in the field of the trade community comparing to the guarantee. I recommend to use standby letter of credit instead of bank guarantee in international transactions because of the merits of the credit aforesaid.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.233-240
• /
• 2015

We analyse reliability of multi-state UH-60 helicopter hydraulic pump system with a multi-functional standby component using Markov analysis method. The system consists of seven components: 2 main pumps, 1 standby pump, 2 primary servos, and 2 tail rotor servos. The standby pump can take over when one more than components fail. Therefore the standby pump is multi-functional standby component. The system has four states: good, deteriorated, dangerous, and failed. The components have 2 states: working and failed. We assume the system is unrepairable when the components fail. We estimate failure distributions and rates using collected failure time data in field. And we classify multi-state of the system according to emergency procedure of UH-60A student handout. We obtain the reliabilities of multi-state system using Visual Basic program because the differential equations is extremely complicated and tedious to solve.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.161-167
• /
• 2013

The purpose of this study was to assess power loss in the computer and office automation equipment and identified a way to save power consumptions through field measurement. In this study, the meaning of standby power was to consume power while waiting for the use of any electronic equipment. This standby consumption was about 11% of total power consumption even though we did not seriously realize it. Therefore, it was very important to measure accurate power consumption at the standby status of electronic equipment. In addition, it also helped to reduce potential risks of electricity associated disasters. This study proposed the way to reduce power losses through automatic turn off switches for power outlets and switches. Finally, this study can evaluate power consumption patterns that can reduce power consumptions and potential risks of power related disasters. This also can achieve the goals of sustainability that can reduce environmental impacts by lowering energy consumptions and greenhouse gas emissions.

• Communications for Statistical Applications and Methods
• /
• 제8권2호
• /
• pp.435-442
• /
• 2001

Bayes estimators and generalized ML estimators for reliability of a k-unit hot standby system with the perfect switch based upon a complete sample of failure times observed from an exponential distribution using noninformative, generalized uniform, and gamma priors for the failure rate are proposed, and MSE's of proposed several estimators for the standby system reliability are compared numerically each other through the Monte Carlo simulation.

• 산업경영시스템학회지
• /
• 제13권22호
• /
• pp.59-64
• /
• 1990

This paper is aimed to study the standby redundant system with the relay of parallel structure, by making use of the character of standby system, which reliability is higher than parallel system's if the relay has higher reliability than a certain level. By assigning the low-priced relay to the subsystem, this method increases the relay reliability, optimizes the standby redundant system reliability without violating the restrictions, and consequently reduces the cost.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 1부
• /
• pp.330-332
• /
• 2010

이동통신시스템에서 Warm standby sharing에 비하여 Hot standby sharing은 데이터 손실이 없고 오류 데이터가 확산되지 않는 등의 다수의 장점을 갖지만 동기화 문제로 인하여 이를 시스템에 실제로 구현하는 것은 어렵다. 따라서 본 연구에서는 Hot standby sharing에 비하여 기존의 Warm standby sharing이 갖는 동기화의 장점에 데이터 손실 및 거짓 데이터의 확산 문제를 개선할 수 있는 이중화 프로세서에 대한 마코프 모델을 설계하고자 한다.

• 한국산업정보학회논문지
• /
• 제20권4호
• /
• pp.75-87
• /
• 2015

중복시스템의 일반적인 구조는 기능을 수행하는 주요부품과 주요부품이 고장 나는 경우에 그 기능을 대신 수행하는 대기부품으로 구성되어 있다. 본 연구에서는 하나의 대기부품이 여러 개의 주요부품의 기능을 동시에 대신 수행할 수 있는 다기능 대기부품을 갖는 병렬시스템을 고려한다. 이 시스템을 구성하고 있는 모든 부품들은 작동상태와 고장상태만 갖는 반면 시스템은 구성 부품들의 상태에 따라 다중 상태를 갖는 것을 가정한다. 이러한 중복구조는 항공기와 같이 시스템의 중량이 중요한 요소인 시스템에서 많이 채택되고 있는 구조이다. 본 연구에서는 이와 같은 중복시스템의 신뢰도를 평가하기 위한 새로운 신뢰도모델링 기법을 제안하고 부품들이 상수고장률을 갖는 경우 마코프 분석 방법을 적용하여 시스템의 신뢰도를 구한다. 또한 본 연구에서 고려하고 있는 시스템과 기존에 이미 알려진 병렬시스템과 중복구조를 갖는 병렬시스템의 신뢰도를 비교하여 다기능 대기부품의 효과를 분석한다.

• 대한산업공학회지
• /
• 제39권2호
• /
• pp.90-98
• /
• 2013

The k-out-of-n system with mixed redundancy is defined as k-out-of-n system which both includes warm-standby and cold-standby components. In case that operating components in the system fail and the system needs quick transition of standby components to operation state, the k-out-of-n system with mixed redundancy is useful for decreasing system failure rate and operational cost. Reliability-Redundancy Optimization Problem (RROP) involves selection of components with multiple choices and redundancy levels for maximizing system reliability with constraints such as cost, weight, etc. A solution methodology by using harmony search algorithm for RROP of the k-out-of-n system with mixed redundancy to maximize system reliability was suggested in this study.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.725-731
• /
• 2006

Hot Standby sparing system detecting faults by using software, and being tolerant any faults by using Hardware Redundancy is difficult to perform quantitative reliability prediction and to detect real time faults. Therefore, this paper designs Hot Standby sparing system using hardware basis self checking logic in order to overcome this problem. It also performs failure mode analysis of Hot Standby sparing system with designed self checking logic by using FMEA (Failure Mode Effect Analysis), and identifies reliability assessment of the controller designed by quantifying the numbers of failure development by using FTA (Fault Tree Analysis)