• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.60-66
• /
• 2007

The first Korean cold room facility for ice mechanics experiments was assembled in 2004. Since then, the $4m{\times}6m$ cold room facility has been used, extensively under various environmental and loading conditions. After reviewing published references on cold room testing methods and also by trial and error, the standard procedures for testing and preparing laboratory ice material were established for the measurement of basic ice properties. In this paper, laboratory experimental techniques with the cold room facility and standard procedures established for ice material properties are introduced. Test specimens include laboratory-grown fresh water ice and frozen soils. Tests are carried out for unconfined compressive strength. Preparation and dimension of the specimen are the most important issues arising in cold room tests. The details of specimen preparation, testing procedure and strength test results are also discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.307-313
• /
• 2010

Quantitative analytical condition for lead and cadmium in copper contained carbon materials using solvent extraction followed by inductively coupled plasma-atomic emission spectrometry was studied. Copper contained carbon samples were dissolved by nitric acid-perchloric acid digestion. Lead and cadmium were determined after separation with KCN masked copper by an dithizone-chloroform solvent extraction. Recovery efficiency of analyte elements was satisfactory, and most of matrix elements causing interference could be effectively eliminated by the separation. Lead and cadmium were quantitatively determined without influence of sample matrix, by applying it procedure to artifact sample.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.30 no.6
• /
• pp.397-401
• /
• 2016

The quality control is a fundamental procedure for the standardization of herbal medicine to guarantee the consistency of efficacy and safety. For a long time, the quality analysis of herbal medicine has been largely dependent on the routine sensory evaluation, such as taste, smell, color, and shape. However, with the recent development of analytical instruments, various scientific approaches have been introduced in this field. On the basis of the theory that the biological activities of herbal medicine are mainly contributed by its chemical compositions, several types of chemical markers have been suggested for the quality evaluation. In addition to the analytical methods for the specific marker compound(s), including analytical marker and active marker, recently, chemical fingerprinting, a method comparing the chromatographic pattern of the whole chemical components, has been developed and widely accepted as a reliable approach for the quality control of herbal medicine. Moreover, in order to exactly understand the relationship between complex compounds and their holistic biological activities in herbal medicine, unique strategies, such as "BECCs (bioactive equivalent combinatorial components)" and "PhytomicsQC" have been established. In this article, we give an overview of the several categories of chemical markers and the recent research trends for the quality evaluation of herbal medicine.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.151-157
• /
• 2005

For the treatment of regulatory clearance of the soils, a procedure for the radionuclides and radioactivity concentration analysis is under development. A strategy for soil sampling including random sampling after homogenization and standardization was set up. Statistical representativeness is considered for not only sampling strategy but also sample size. In this study, designed sample size was designed with confidence interval and error bound of soil using the pilot samples which were taken following the sampling strategy.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.712-721
• /
• 2002

The active network is a new networking approach to allow new protocols to be developed easily by solving the limitation of the existing protocol development procedure and the long protocol standardization process. So far many research institutes and universities have proposed active node architectures and active packet formats, but still there are some problems needed to be solved. One of them is the active packet format and the routing approach which consider the requirements of various active applications. Therefore, in this paper, we figure cut the requirements of various active applications and design four types of active packet formats that reflect these requirements and propose routing schemes appropriate for these characteristics. Also we propose an active node architecture which reflect these requirements.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.161-168
• /
• 2011

Objective: The aim of this study is to review the ISO(the International Organization for Standardization) standards recommendations on a human error tolerant control room design. Background: ISO TC(Technical Committee) 159 published a variety of international standards on design of mental and physical work, design of displays and controls, and workstation layout design. A proper edition of these standards can be a good resource for a human error tolerant control center design guidelines. Method: Recommendations of ISO TC 159 standards were grouped into arrangement of control suite, layout of control room, layout and dimensions of workstations, design of displays and controls, environmental design, alarm, automation, management system design, procedure and training. Results: It was found that some standards on the design of supervisory control and data acquisition(SCADA), alarm, automation, layout, workload management, and environment can be used for human error prevention guidelines in the control center design. Conclusion: ISO TC 159 standards were not sufficient to cover all the ergonomics area of control center design. Application: Designers can have technical aids from these ISO standards to improve ergonomic performance of their control center.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.577-596
• /
• 2020

Drought is a natural disaster that directly affects agriculture, which has a great impact on the global agricultural production system and yield. The lack of water storage in most parts of the country due to the lack of precipitation has caused a great increase in social interest in drought due to the dryness of rice fields and crops. As the drought period increases and the drought intensity becomes stronger, it is believed that drought damage to crops will continue; thus, it is necessary to understand the vulnerability to irrigation performance and the ability of irrigation facilities. Therefore, this study conducted a vulnerability assessment of irrigation facilities (public Groundwater well) in cities across the country. The survey was conducted using statistical data from 2007 to 2016, and the vulnerability score was calculated according to the vulnerability evaluation procedure for drought in the irrigation facilities (public groundwater wells). Among 157 regions, 136 areas were very vulnerable; 14 areas were vulnerable; 3 areas were normal; 4 areas were good, and 0 areas were excellent. The vulnerability assessment can be used as basic data for the development or maintenance of field irrigation facilities in the future by understanding the vulnerability of irrigation facilities.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1941-1954
• /
• 1999

This paper presents a design and implementation of CRs(CHILL Run-time support System) to adapt the concurrent processing facilities of CHILL(CCITT High Level Language) which had recommended by ITU-T(International Telecommunication Union Telecommunication Standardization Sector). Because the CHILL provides more various concurrent processing facilities that other concurrent programming language, a design and implementation on CRS can give us real effects to gain the major functionalities and the techniques of the concurrent processing. In this paper, we design the interface rules of concurrent functions to conform with the CHILL compiler. We use the concurrent processing primitives as the library style to be invoked by procedure calls, and implement the start-up routine of the CHILL program, the context switching routine, and the CHILL process control parts to control be execution of the CHILL processes concurrently.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2006

Study of effective synthesis has been amplified in working-level image process corresponding to one of postproduction synthesis ares. However, it is very role to recognize the overall procedure of image composition and unprepared state on a research on variety and complexity for the specific composition method, it is necessary to materialize the overall pattern that can understand stream of image and standardization. In order to embody, it may be desirable that improve working efficiency of database by form called resources. In this paper, by providing the several values such as matte, key, motion, scale, position, or opacity characteristics, we directed th solving problems through the detailed examples while the user has the difficulty on image synthesis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.102-111
• /
• 2021

Maintainability is a major design parameter that includes availability as well as reliability in a RAM (reliability, availability, maintainability) analysis, and is an index that must be considered when developing a system. There is a lack of awareness of the importance of predicting and analyzing maintainability; therefore, it is dependent on past-experience data. To improve the utilization rate, maintainability must be managed as a key indicator to meet the user's requirements for failure maintenance time and to reduce life-cycle costs. To improve the maintainability-prediction accuracy in the detailed design stage, we present a maintainability-prediction method that applies Method B of the Military Standardization Handbook (MIL-HDBK-472) Procedure V, as well as a Korean maintainability-prediction software package that reflects the system complexity.