• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.499-505
• /
• 1999

The time paramters most frequently used in hydrology are the tuime of concentration, lag time , time base, time to equilibrium , time to peak, time of travel, and residence time. Especially the time of concentraion constitute an important part of operating rainfall-runoff modeling and determining critical rainfall intensity. In the result of simulation , we discoved that SCS foumula has the highest value with length, Kerby with height and SCS with slop respectively, while only Kraven formula has the lowest value in them. With concerning to relative sensitivty, the time of concentraion was marked the constant effect according to increase of length and slope level, and the length has much more effect than the slope relatively in parameters.

• Journal of Information Technology Services
• /
• v.1 no.1
• /
• pp.119-139
• /
• 2002

It is noteworthy that IMT -2000 communication network based on All-HP/AIN(Advanced Intelligent Network) should accomodate current and future wire/wireless AIN service easily through integration and gearing AIN construction elements. In this paper. Intelligent Farmer model(I-Farmer Model) and methodology are suggested in order to solve the several problems including standardization on implementation of Q3 interface in Telecommunication Management Network(TMN) agents which is caused by heterogeneous platform environment and future maintenance. Also this paper proposes ITI algorithm transforming the system which is designed by I-Farmer model to Interface Specification Model(ISM) applying the I-Farmer model. In addition to ITI algorithm. we suggest NTS(Node to SIB) algorithm converting entity node and ILB/OLB component in agent system designed by the I-Farmer model to SIB of AIN GFP(Global Functional Plane) and to ASIB for application program.

• Electronics and Telecommunications Trends
• /
• v.39 no.1
• /
• pp.25-35
• /
• 2024

Wireless communication, including mobile networks and local area networks, has become an essential service in the society. Wireless communication is evolving to include sensing services, as demonstrated by the increasing attention in organizations and standards such as 3GPP and IEEE 802.11. This survey presents technology trends in the integration of sensing and communication. The standardization status along with use cases provided by standards are explained. In addition, core and supporting technologies such as channel modeling, waveform design, and artificial intelligence are analyzed.

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.1-13
• /
• 2012

Various input data required for water quality modeling have considerable impacts on modeling results and relevant analysis due to the absence of data standardization and lack of data accuracy. With this in mind, this study mainly focused on the designing Korean Reach File for more effective water quality modeling through the supply of database composed with accurate hydraulic and hydrologic data. The Korean Reach File is the hydraulic database with the locational information of individual reaches, and each reach represents the stream reach of homogeneous hydraulic characteristics. In detail, it has reach code designating each stream reach, and topological information including catalog unit, segment, marker and index. It was also designed considering linkage of existing codes such as stream name and stream code. The devised reach code was implemented to Kyungan River at the City of Gwangju of Kyunggi Province and the results showed that the reach code could effectively support the input database integrating basic numerous data required for water quality modeling based on a criterion as well as easier linkage and utilization with existing database. In addition, more systematic water quality management was enabled through the linkage of existing data such as treatment facilities, pollutant data, and management institutes using the reach codes defined for each stream section. In the future, more efforts need to be made to adopt the reach code as the national standard data thereby enabling utilization of numerous relevant database through the assigning of reach code to individual stream reaches nationwide.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.7-14
• /
• 2008

To nurture skilled IT professionals required in the 21st information society, we have been faced to the need of learner-centered open lifelong education through the e-learning system that crosses the boundaries of time, space and geography. The object of this research is primarily as-is analysis of the IT contents in present cyber institutions, then making out the basic research data by to-be analysis and international standardization trend through benchmarking. Eventually this research intends to produce a prototype of the contents especially for the subjects related to the IT which is based on the modeling of e-Learning standard contents development model. It is possible that the final output of this project is used for the contents producing and operating data in cyber universities and institutions. This output also enhances the international competitiveness by the standardization and presents a standardized guideline to the domestic cyber education institutions.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.418-424
• /
• 2007

The purpose of this study is to propose a standard of converting 3D shape of men in twenties to 2D patterns. This can be a basis for scientific and automatic pattern making for high quality custom clothes. Firstly, representative 3D body shape of men was modeled. Then the 3D model was divided into 3 shells, front, side and back. Among them, the front shell was divided into 4 blocks by bust line and princess line. Secondly, curves are generated on each block according to matrix combination by grid method. Then triangles were developed into 2D pieces by reflecting the 3D curve length. The grid was arranged to maintain outer curve length. Next, the area of developed pieces and block were calculated and difference ratio between the block area and the developed pieces' area is calculated. Also, area difference ratio by the number of triangles is calculated. The difference ratio was represented as graphs and optimal section is selected by the shape of graphs. The optimal matrix was set considering connection with other blocks. Curves of torso upper front shell were regenerated by the optimal matrix and developed into pieces. We validated it's suitability by comparing difference ratio between the block area and the developed pieces' area of optimal section. The results showed that there was no significant difference between block area and the pieces' area developed by optimal matrix. The optimal matrix for 2D developing could be characterized as two types according to block's shape characteristics, one is affected by triangle number, the other is affected by number of raws more than columns. Through this study, both the 2D pattern developing from 3D body shape and 3D modeling from 2D pattern is possible, so it's standardization also possible.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.187-197
• /
• 2015

Oriental mineral medicines are single or mixture of more than one mineral species or rock/fossil which are used to treat disease. Mineral medicines remove harmful or useless substances to decrease toxicity and secondary effects, and cause the manufacture of medical compounds with increased efficacy. The extraction test is an accepted in vitro system to predict the bioaccessibility of major and minor elements from mineral medicine. It incorporates gastrointerstinal tract parameters representative of a human body that including stomach and small intestinal pH which are the same as digestion condition. The bioaccessibility of a mineral medicine is the fraction that is soluble in the gastrointestinal environment and is available for absorption. Reaction path modeling in the human body can predict digestion with gastric fluid as well as absorption in the small intestine, existence in body fluids and reaction progress of the exhaust process according to pH conditions in body. Also reaction path modeling can predict bioavailability, which is equal to existence rate in the body and the form and amount of a medicine in the body after intake. The study results from predicating the existence form mineral medicines in the body, and proving the effective ingredient using bioaccessibitily and human risk assessment, suggest these that should be necessary data for new medicine development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.743-751
• /
• 2016

It is critical to effectively change the measures of prevention from the breakdown maintenance proceeding an apartment housing maintenance task scope. It is necessary that systematization be performed for a series of tasks, such as facility inspection, diagnosis and replacement. In addition, it is preceded by establishing a standardization for maintenance work scope. Therefore, this study examined the problems related to public rental housing maintenance work scope to manage it more systematically. In addition, the study suggests a work process section for facility repairs, long term replacement and general maintenance using one on one interviews with experts to classify the occupants, management office and head office. This study's standard work system is expected to provide fairness and transparency in addition to improving the productivity in public rental housing maintenance via an efficiency promotion plan. In addition, it is used as the basic reference for developing a system of public rental housing maintenance costs and diagnosis actions. Finally, it is necessary to create improvements that provide a more objective work system standardization throughout the analysis of the productivity data according to the work flow and the review of the occupants, management office and head office in the future applications of the pilot site.

• Spatial Information Research
• /
• v.7 no.2
• /
• pp.175-190
• /
• 1999

Recently , as GIS technology is rapidly improved and stabilized, there are some needs to reuse pre-developed and powerful GIS technology. GIS standardization based on components and open interfaces becomes a way to solve those reusability of previous GIS technology. This GIS standardization currently focuses on building the GIS Data Infrastructure that is being deployed globally. Especially, OpenGIS consortium which is mainly made up of international GIS leading vendors is announcing some GIS abstract specifications and implementation specifications. This study focuses on how could we design and implement the OLE/COM-based data provider component based on various DBMS or file systems, how could these data provider components be used for enterprise UIS(Urban Information Systems) and how could various formatted GIS data be shared in one system. Also some problems practically caused by an implementation process of data provider component are listed up and some solutions are given. Furthermore, design and analysis of UML(Unified Modeling Language) was reformed through the data provider component development task and this UML methodology is able to indicate a standardized model for newly developed data provider component.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.347-358
• /
• 2022

In order to satisfy the extraction and use of information such as estimates and processes required in the design and construction stages of BIM, which is an expectation of overall construction operation for the design and construction stage of domestic buildings, it is insufficient to supply and apply mobile technologies or terminals. In this paper, standardization of BIM-based processes from the design stage to the construction stage is proposed as an efficient construction system method through mobile-based simulation and test-bed case analysis review. The current status and potential of BIM application were identified through theoretical review of BIM and case studies at home and abroad. In addition, the overall flow of the project and the direction of effective process construction were investigated through each process by 3D, 4D, and 5D execution stage and the role of each collaborator. 4D building process BIM simulation system using mobile was implemented by applying a visualization engine that simulates process information, object information connection module, and related object information. Therefore, it was possible to minimize the possibility of re-construction of the BIM design and construction process model through the visualization of 2D drawings based on the 3D model of the building and the review of errors and interferences in the drawings. In addition, in the implementation of simulation for each process of the construction process through mobile devices, it was possible to support construction progress and process management according to the optimal option selected by the user.