• Communications for Statistical Applications and Methods
• /
• v.17 no.5
• /
• pp.647-652
• /
• 2010

By using a Malliavin calculus, we prove the central limit theorem on the power variation of the product of the unordered rectangles associated with a standard Brownian sheet.

• IE interfaces
• /
• v.18 no.4
• /
• pp.444-453
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed "adequate". The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimators are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.10a
• /
• pp.185-190
• /
• 1993

In this paper, we investigate the effect of production uncertainty - especially demand fluctuation and activity time variation, to production control policies. First, we examine three famous production control policies, namely, MRP, JIT, OPT, from shop floor control perspective and analyze the difference among them. Based on these, simulation studies are performed to draw out the effects of demand fluctuation which are classified into demand lumpiness and demand irregularity, and, the effects of activity time variation which are classified into standard time variation and non-standard time variation. Experimental investigation shows that, in terms of demand fluctuations, MRP is affected by demand lumpiness, but JIT by demand irregularity. And we also see that both MRP and JIT are influenced by standard time variation with respect to activity time variations.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.975-982
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed 'adequate'. The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within-part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimates are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.426-435
• /
• 2012

The variation of stream flow is the one of the most important factors which influence on that of water quality in the unit watershed. The target water quality goal is established and permissible load is allotted in the base of the standard flow condition along with its water quality for the management of Total Maximum Daily Loads (TMDLs). A standard flow selected could cause problems in the load allotment if it was not properly arranged. This study reviewed the acquisition of water quality data, the self-variation and the retainability in water quality on the specific flow conditions. This study also proposed the median and the adjusted average flow condition out of general flow conditions as alternative standard flow conditions. It is considered that the alternatives can make the water quality data easily acquired and the water quality representativeness more enhanced on the standard flow conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.974-978
• /
• 1991

Electro-pneumatic valve is an electro-mechanical device which converts electric signal into pneumatic flow mu or pressure. A measurement of dynamic response time is very important to evaluate valve performance. Dynamic response time of electro-pneumatic valve has a variation accordance with valve types, operating way and test standard. In this study, automatic measurement system of dynamic response time is composed based on test condition of dynamic response time test standard(CETOP, JIS). Also, in this study test pressure variation characteristics accordance with variation of solenoid excitation power, and we developed dynamic response measurement system enable to compare of and analyze these two characteristics.

• Journal of The Korean Astronomical Society
• /
• v.42 no.6
• /
• pp.161-174
• /
• 2009

Observation of standard stars is of crucial importance in stellar photometry. We have studied the standard transformation relations of the UBV RI CCD photometric system at the Maidanak Astronomical Observatory in Uzbekistan. All observations were made with the AZT-22 1.5m telescope, SITe 2k CCD or Fairchild 486 CCD, and standard Bessell UBV RI filters from 2003 August to 2007 September. We observed many standard stars around the celestial equator observed by SAAO astronomers. The atmospheric extinction coefficients, photometric zero points, and time variation of photometric zero points of each night were determined. Secondary extinction coefficients and photometric zero points were very stable, while primary extinction coefficients showed a distinct seasonal variation. We also determined the transformation coefficients for each filter. For B, V, R, and I filters, the transformation to the SAAO standard system could be achieved with a straight line or a combination of two straight lines. However, in the case of the U filter and Fairchild 486 CCD combination, a significant non-linear correction term - related to the size of Balmer jump or the strength of the Balmer lines - of up to 0:08 mags was required. We found that our data matched well the SAAO photometry in V, B - V, V - I, and R - I. But in U - B, the difference in zero point was about 3.6 mmag and the scatter was about 0.02 mag. We attribute the relatively large scatter in U -B to the larger error in U of the SAAO photometry. We confirm the mostly small differences between the SAAO standard UBV RI system and the Landolt standard system. We also attempted to interpret the seasonal variation of the atmospheric extinction coefficients in the context of scattering sources in the earth's atmosphere.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.397-402
• /
• 2015

This study is to compare variation indexes by monthly, weekly and hourly using AIS data, which was collected for 365 days from January 1st to December 31st, 2013 at Mokpo Port and then, computed the maximum standard error by observation days. The comparison of monthly variation indexes showed that the monthly variation indexes for September and February were 1.11 and 0.84, respectively, in turn revealing that the maritime traffic in September was about 32.1 % larger than February. Also, the daily variation indexes for Tuesday and Sunday were 1.05 and 0.92, respectively, in turn revealing that the maritime traffic in Tuesday was about 14.1 % larger than Sunday. When the maritime traffic investigation is executed for at least 1 week in consideration of the daily variation index, it is possible to reduce the maximum standard error rate to be within 21 %. Therefore, if the maritime traffic investigation is made in the month and week with low maritime traffic, each variation index should be applied to reflect the actual maritime traffic.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2015

Wax deposition hinders oil flow assurance. Huge amount of money and time were required for mitigation of wax deposition in the oil field. For prediction and mitigation of wax deposition problem, Wax Appearance Temperature(WAT), which is the temperature at which the first wax crystals start to form, needs to be measured in advance. There is a standard method which is optical way to measure the WAT of transparent oil. However, standard method cannot be applied to opaque oil which is common produced oil in the field. In this study, WAT of three transparent oil samples were measured using heat flux variation analysis, viscosity variation analysis and density variation analysis, and compared with WAT measured by standard method. As a result, WAT measured by density variation analysis is the more reliable than heat flux variation analysis and viscosity variation analysis. WAT of two opaque oils were measured using density variation analysis.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.137-144
• /
• 2002

This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the variation of the upper body surface with the use of the method of Surgical tape. The subject were 3 middle elementary schoolboys classified standard somatotype, and arm-movements were consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. Shoulder point was moved to be the inside or upside and the shape of the armhole-line was differently changed as the arm-movement become larger. By moving to upside of the anterior armpit point, posterior armpit point and armpit point, the increase of the side seam length and the ascent of the line of width between armpits were distinct. And by arm-movements, in the items of horizontal, front neck base girth, back upper bust girth, back bust girth and back waist girth were increased and the other standard lines were apt to be decreased. In the items of vertical, all standard lines of front side and side seam length showed increased, back waist length and back length showed decreased. The variation of armhole was indefinite. In the rate of the variation, the shoulder length showed the maximum rate of contraction by 41.3%, decreasing 3.7 cm in $180^{\circ}$ degrees, and the side seam length showed the maximum rate of expansion by 60.6%, increasing 8.97 cm in the same degrees.