• 제목/요약/키워드: Standard unit cost

검색결과 197건 처리시간 0.026초

국내 개발 인공위성을 위한 저비용 원격명령 처리 시스템 구현 및 분석 (Development and Analysis of Low Cost Telecommand Processing System for Domestic Development Satellites)

  • 박상섭;이성진;전용기
    • 한국항공우주학회지
    • /
    • 제49권6호
    • /
    • pp.481-488
    • /
    • 2021
  • 인공위성의 원격명령 처리시스템은 상태감시, 제어 및 미션 실행을 위한 원격명령을 제공하는 유일한 통로이다. 국내의 인공위성은 과학 및 기술 위성, 다목적 위성 및 정지궤도 위성으로 나눌 수 있으며 CCSDS 표준 프로토콜을 사용하여 지상국과 통신을 수행한다. 그러나 기존의 국내개발 위성은 소프트웨어를 사용하여 원격명령어를 디코딩하여 소프트웨어 개발 및 검증 비용이 높고 하드웨어와 비교할 때 상대적으로 성능이 낮다. 본 연구에서는 원격명령 디코딩 ASIC을 이용한 원격 명령 처리시스템을 제시한다. 이 시스템의 하드웨어는 telecommand RAM, protocol RAM/ROM, telecommand ASIC, interface FPGA 및 relay block으로 구성되었다. 이 시스템은 인공위성이 사용하는 일반 명령 및 펄스 명령을 처리한다. 시스템을 시험 및 검증하기 위해 점검 장비 및 시험환경을 구축하였다. 제안한 ASIC 기반의 telecommand 처리시스템은 소프트웨어 기반 디코딩 시스템에 비해 개발 비용을 1/5로 줄였을 뿐만 아니라 성능은 105배 향상되었다.

대기행렬을 이용한 위음성률이 있는 코로나 취합검사 시스템의 분석 (The Analysis of COVID-19 Pooled-Testing Systems with False Negatives Using a Queueing Model)

  • 김길환
    • 산업경영시스템학회지
    • /
    • 제44권4호
    • /
    • pp.154-168
    • /
    • 2021
  • COVID-19 has been spreading all around the world, and threatening global health. In this situation, identifying and isolating infected individuals rapidly has been one of the most important measures to contain the epidemic. However, the standard diagnosis procedure with RT-PCR (Reverse Transcriptase Polymerase Chain Reaction) is costly and time-consuming. For this reason, pooled testing for COVID-19 has been proposed from the early stage of the COVID-19 pandemic to reduce the cost and time of identifying the COVID-19 infection. For pooled testing, how many samples are tested in group is the most significant factor to the performance of the test system. When the arrivals of test requirements and the test time are stochastic, batch-service queueing models have been utilized for the analysis of pooled-testing systems. However, most of them do not consider the false-negative test results of pooled testing in their performance analysis. For the COVID-19 RT-PCR test, there is a small but certain possibility of false-negative test results, and the group-test size affects not only the time and cost of pooled testing, but also the false-negative rate of pooled testing, which is a significant concern to public health authorities. In this study, we analyze the performance of COVID-19 pooled-testing systems with false-negative test results. To do this, we first formulate the COVID-19 pooled-testing systems with false negatives as a batch-service queuing model, and then obtain the performance measures such as the expected number of test requirements in the system, the expected number of RP-PCR tests for a test sample, the false-negative group-test rate, and the total cost per unit time, using the queueing analysis. We also present a numerical example to demonstrate the applicability of our analysis, and draw a couple of implications for COVID-19 pooled testing.

BMS 데이터를 활용한 콘크리트 교량의 결함-공법-비용 매핑 알고리즘 개발 (Development of Defect-Repair Method-Cost Mapping Algorithm of Concrete Bridge Using BMS Data)

  • 이창준;박원영;차용운;장영훈;박태일
    • 대한토목학회논문집
    • /
    • 제43권2호
    • /
    • pp.267-275
    • /
    • 2023
  • 최근 30년 이상 노후화된 국내 인프라의 증가로 한정된 예산 내에서 인프라 유지관리를 위한 정확한 유지관리 비용산출과 그에 따른 적절한 예산분배의 중요성이 증대되고 있다. 이에 본 연구에서는 콘크리트 교량의 대표적인 결함과 이에 대한 보수보강 공법들을 매칭하고 유지보수에 필요한 비용을 산정하였다. 표준품셈과 BMS (Bridge Management System) 데이터 분석을 통해 교량의 보수보강 공법을 분류하였으며, 결함의 위치와 종류, 크기에 따라 결함-공법을 매칭하였다. 그리고 표준품셈을 기준으로 단위당 작업량과 물량을 계산하여 노무비, 경비, 재료비를 구분하여 산출하였다. 서울시 교량 유지보수 내역서와 비교를 통해 평균 예측 정확도가 85.1 %가 나왔으며, 결함의 간단한 조건을 통해 유지보수 비용을 파악할 수 있다. 향후 현장 조건을 고려한 장비 및 야간작업 여부를 추가하여 더 높은 유지보수 비용을 파악할 수 있을 것으로 기대된다.

The Energy Analysis and Evaluation of the NEO-Hanok

  • Han, Sang Hee;Park, So Yeon;Park, Hyo Soon
    • KIEAE Journal
    • /
    • 제14권2호
    • /
    • pp.77-86
    • /
    • 2014
  • Plenty of efforts have been made in the traditional architecture of Korea, Hanok, to develop various elements such as restoration, the introduction of new design, and energy-saving while systemic setups on standard and evaluation of eco-friendly energy design of Hanok are lacking. If we evaluate energy performance based on current standards without reflecting unique features of Hanok on the system, Hanok will be included in the very low grade among the residential buildings being included in the approval system of eco-friendly architecture or the unique features will be modified and the burden of increased construction cost. Therefore, this study is to prepare the basic reference for the introductory evaluation system by evaluating the energy performance level of NEO-Hanok based on the current building energy rating system. The result for NEO-Hanok based on the building energy rating system, we propose the rating standard with scorecard elements of NEO-Hanok by considering the necessity of identity and standard for NEO-Hanok. As a result of infiltration test to check the tightness, it was measured as 10.81 times/h (50 ACH). As we switch from the main insulation for the wall from the glass wool 64k(0.035W/mk) to rigid polyurethane foam first class first unit (0.024W/mk), the result was slightly increased from the first demand quantity rating yield $249.8kWh/m^2{\cdot}yr$ to $235.0kWh/m^2{\cdot}yr$. Current certificate system is focused more on the heating load than the cooling load, it is disadvantageous for Hanok, which has less cooling energy consumption in summer. The rating result from the target building study is level 4.

6 시그마의 적용에 대한 연구 (An Application Study of Six Sigma in Clinical Chemistry)

  • 장상우;김남용;최호성;박용원;추경복;윤근영
    • 대한임상검사과학회지
    • /
    • 제36권2호
    • /
    • pp.121-126
    • /
    • 2004
  • The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.

  • PDF

Quality Control of Majoon-e-Nisyan and its Acute Oral Toxicity Study in Experimental Rats

  • Shaikh, Masud;Husain, Gulam M.;Naikodi, Mohammed Abdul Rasheed;Kazmi, Munawwar H.;Viquar, Uzma
    • 셀메드
    • /
    • 제11권1호
    • /
    • pp.2.1-2.8
    • /
    • 2021
  • The clinical condition Amnesia causes difficulty in learning new information and the inability to recall past events. It is primarily concerned with recent memory loss. Majoon-e-Nisyan (MJN) is a polyherbal Unani formulation, present in a semi-solid form. It is widely used potent drug of the Unani System of Medicine (USM) for treating Nisyan (amnesia). In the present study polyherbal Unani formulation, MJN has been studied for its quality control and acute toxicity. Standardization (quality control) of drugs deals with drug identity, drug quality and purity determination. Standardization of MJN had been done as per the Unani pharmacopoeial parameters approved by World Health Organization (WHO) - Pharmacognostical parameters, Physico-chemical parameters, high-performance thin-layer chromatography (HPTLC), microbial load, aflatoxin, and heavy metals. Solvents and chemicals used in the study were of analytical grade and used instrument were calibrated. By conducting an acute oral toxicity study in rats, the safety of MJN was assessed. The limit test method of OECD guideline 425 was followed in the study. Results of standardization and standard operating procedures (SOPs) for preparation of MJN may serve as the standard reference in the future. The data generated in the study for the quality control of MJN proved the quality of formulation and shows that MJN is not toxic in rats following acute dosing up to 2000 mg/kg bw. The data obtained in the paper for MJN may be used as a standard guideline for preparation of the formulation which can save time, cost, and resources for future research endeavours.

건설공사 공정별 건설폐기물 발생량 비교 및 폐기물 발생 원단위 산정에 관한 연구 (Comparison of the Construction Waste Generated by the Project and the Estimation of the Waste Generation Unit)

  • 송태협;성진욱
    • 한국건설순환자원학회논문집
    • /
    • 제5권4호
    • /
    • pp.427-434
    • /
    • 2017
  • 건설폐기물의 발생은 해체단계와 신축단계로 구분할 수 있으며 대부분의 폐기물은 해체단계에서 발생하고 있다. 그러나 최근 국내 신축 건설공사가 연간 150조 규모로 확대됨에 따라 신축공사가 급격하게 증가하고 있다. 특히 건설폐기물 배출이 많은 건축공사의 규모가 100조를 초과함에 따라 신축현장에서의 건설폐기물 발생량에 대한 관리가 요구되고 있다. 신축현장은 해체공사 현장과 달리 발생된 폐기물을 성상별로 분리하여 배출이 가능하며, 상대적으로 이물질 함량이 적게 발생한다. 본 연구에서는 신축현장의 건설폐기물 성상별 발생량을 조사하고, 이를 바탕으로 건설폐기물 발생 원단위를 산정하고자 하였다. 또한 기존 발생 원단위가 콘크리트와 혼합폐기물 중심으로 되어 있어 합성수지, 폐목재, 폐보드류를 추가적인 항목으로 설정하여 원단위 설정을 하였다. 원단위 조사는 총 공사 기간별 발생하는 성상별 폐기물 조사를 실시하였다. 조사결과 신축건설현장은 초반 30%까지와 70% 이후의 공정에서 대부분의 폐기물이 배출되는 것으로 보사되었으며, 혼합건설폐기물의 비율이 45%로 높게 나타났다. 원단위 분석결과 본 연구에서 산출한 결과는 기존의 표준 품셈에 비하여 약 1.9배의 폐기물이 배출되는 것으로 나타났다.

대도시 혼잡구간의 아스팔트 포장에 대한 경제성 분석 모델 연구 (A Study on the Economical Analysis Model for Asphalt Pavementin Congestion Area of Metropolitan)

  • 조병완;태기호;김도근
    • 대한토목학회논문집
    • /
    • 제26권5D호
    • /
    • pp.771-781
    • /
    • 2006
  • 본 연구는 대도시 아스팔트 포장에 대한 포장공법에 대한 LCC 분석모델 개발 및 VE 평가에 관한 연구로 대도시 포장의 공용연수 동안에 발생하는 총 생애주기비용을 고려하여, 지역 특성과 교통량 등 포장의 수명에 영향을 주는 인자에 대해 보다 효율적으로 대처할 수 있는 포장공법 선정에 대한 의사 결정을 지원하기 위해 수행되었다. 이를 위해 우리나라의 대표적 대도시라고 할 수 있는 서울시의 관련 자료를 토대로 LCC 분석모델을 개발하였고, 관련 실무자의 의견을 반영하여 VE 평가를 실시하였다. LCC 분석모델 개발은 포장공법별로 공통되는 비용항목을 제외한 포장공법 선정에 직접적으로 영향을 주는 비용항목으로 구성하였으며, 이렇게 개발된 LCC 분석모델을 서울시에 현재 공용중인 사례 대상노선을 선정하여 적용해 그 타당성을 검토하였다. 분석에 사용되는 비용항목의 근거자료는 서울시 통계자료와 단가산출 기준자료 등을 이용하여 분석의 신뢰성을 높였다. 개발된 LCC 분석 모델은 대도시 아스팔트 포장에 국한적으로 사용되고 있는 개질 아스팔트와 재생 아스팔트를 일반아스팔트와 비교 분석하여 대도시의 지역 특성과 교통량 등을 고려한 최적 포장공법의 선정을 지원할 수 있을 것이라 판단된다.

일 대학병원 호스피스 병동 입원 환자의 간호활동시간 측정과 원가산정 (Determination of Cost and Measurement of nursing Care Hours for Hospice Patients Hospitalized in one University Hospital)

  • 김경운
    • 간호행정학회지
    • /
    • 제6권3호
    • /
    • pp.389-404
    • /
    • 2000
  • This study was designed to determine the cost and measurement of nursing care hours for hospice patients hostpitalized in one university hospital. 314 inpatients in the hospice unit 11 nursing manpower were enrolled. Study was taken place in C University Hospital from 8th to 28th, Nov, 1999. Researcher and investigator did pilot study for selecting compatible hospice patient classification indicators. After modifying patient classification indicators and nursing care details for general ward, approved of content validity by specialist. Using hospice patient classification indicators and per 5 min continuing observation method, researcher and investigator recorded direct nursing care hours, indirect nursing care hours, and personnel time on hospice nursing care hours, and personnel time on hospice nursing care activities sheet. All of the patients were classified into Class I(mildly ill), Class II (moderately ill), Class III (acutely ill), and Class IV (critically ill) by patient classification system (PCS) which had been carefully developed to be suitable for the Korean hospice ward. And then the elements of the nursing care cost was investigated. Based on the data from an accounting section (Riccolo, 1988), nursing care hours per patient per day in each class and nursing care cost per patient per hour were multiplied. And then the mean of the nursing care cost per patient per day in each class was calculated. Using SAS, The number of patients in class and nursing activities in duty for nursing care hours were calculated the percent, the mean, the standard deviation respectively. According to the ANOVA and the $Scheff{\'{e}$ test, direct nursing care hours per patient per day for the each class were analyzed. The results of this study were summarized as follows : 1. Distribution of patient class : class IN(33.5%) was the largest class the rest were class II(26.1%) class III(22.6%), class I(17.8%). Nursing care requirements of the inpatients in hospice ward were greater than that of the inpatients in general ward. 2. Direct nursing care activities : Measurement ${\cdot}$ observation 41.7%, medication 16.6%, exercise ${\cdot}$ safety 12.5%, education ${\cdot}$ communication 7.2% etc. The mean hours of direct nursing care per patient per day per duty were needed ; 69.3 min for day duty, 64.7 min for evening duty, 88.2 min for night duty, 38.7 min for shift duty. The mean hours of direct nursing care of night duty was longer than that of the other duty. Direct nursing care hours per patient per day in each class were needed ; 3.1 hrs for class I, 3.9 hrs for class II, 4.7 hrs for class III, and 5.2 hrs for class IV. The mean hours of direct nursing care per patient per day without the PCS was 4.1 hours. The mean hours of direct nursing care per patient per day in class was increased significantly according to increasing nursing care requirements of the inpatients(F=49.04, p=.0001). The each class was significantly different(p<0.05). The mean hours of direct nursing care of several direct nursing care activities in each class were increased according to increasing nursing care requirements of the inpatients(p<0.05) ; class III and class IV for medication and education ${\cdot}$ communication, class I, class III and class IV for measurement ${\cdot}$ observation, class I, class II and class IV for elimination ${\cdot}$ irrigation, all of class for exercise ${\cdot}$ safety. 3. Indirect nursing care activities and personnel time : Recognization 24.2%, house keeping activity 22.7%, charting 17.2%, personnel time 11.8% etc. The mean hours of indirect nursing care and personnel time per nursing manpower was 4.7 hrs. The mean hours of indirect nursing care and personnel time per duty were 294.8 min for day duty, 212.3 min for evening duty, 387.9 min for night duty, 143.3 min for shift duty. The mean of indirect nursing care hours and personnel time of night duty was longer than that of the other duty. 4. The mean hours of indirect nursing care and personnel time per patient per day was 2.5 hrs. 5. The mean hours of nursing care per patient per day in each class were class I 5.6 hrs, class II 6.4 hrs, class III 7.2 hrs, class IV 7.7 hrs. 6. The elements of the nursing care cost were composed of 2,212 won for direct nursing care cost, 267 won for direct material cost and 307 won for indirect cost. Sum of the elements of the nursing care cost was 2,786 won. 7. The mean cost of the nursing care per patient per day in each class were 15,601.6 won for class I, 17,830.4 won for class II, 20,259.2 won for class III, 21,452.2 won for class IV. As above, using modified hospice patient classification indicators and nursing care activity details, many critical ill patients were hospitalized in the hospice unit and it reflected that the more nursing care requirements of the patients, the more direct nursing care hours. Emotional ${\cdot}$ spiritual care, pain ${\cdot}$ symptom control, terminal care, education ${\cdot}$ communication, narcotics management and delivery, attending funeral ceremony, the major nursing care activities, were also the independent hospice service. But it is not compensated by the present medical insurance system. Exercise ${\cdot}$ safety, elimination ${\cdot}$ irrigation needed more nursing care hours as equal to that of intensive care units. The present nursing management fee in the medical insurance system compensated only a part of nursing car service in hospice unit, which rewarded lower cost that that of nursing care.

  • PDF

패션소품생산 분야의 국가직무능력표준(NCS) 개발에 관한 연구 (A Study on the National Competency Standards of Fashion Accessories Production)

  • 서승희;이신영
    • 복식
    • /
    • 제65권1호
    • /
    • pp.46-60
    • /
    • 2015
  • This study analyzed the process of development and verification of standards through the competency analysis of fashion accessories products in the development of 'National Competency Standards'(NCS), which was carried out in 2013 for the fashion industry. The NCS for fashion accessories production was developed through three Focus Group Interviews (FGIs) and fashion accessories production was defined as "the process of design, development and manufacture intended to produce items that improve the degree of completion of fashion products that are produced from textile fabric, knitted fabric, leather and other materials such as bags, belts, hats, gloves, scarves, neckties and socks with the exception of clothes". The competency unit for fashion accessories production was analyzed in 11 categories: development of design; development of materials; production of prototype samples; calculation of cost; determination of mass production model and price; planning of main manufacture process; ordering of materials; planning for mass production; preparation for mass production; mass production; and inspection of completed products, and the verification was carried out on development outcomes through a survey carried out of on-site personnel. This study recommends the following direction for future improvements based on an analysis of the development process of the NCS for fashion accessories production. First, future development of standards should first provide a rational category system for each area of fashion good production based on the production process, which should be followed by a detailed competency survey. Second, in order to ensure a more efficient verification survey, an expert for each competency unit should be designated for the develop standard to induce a more sincere response. Also the questionnaire should require supplementation in order to collect the various additional opinions of experts of the field. Finally, this study concludes that it is urgent to procure an education infrastructure and specialized professors in order to apply the competency standard for fashion accessories production to the education sector. This study also concludes that the government will be required to provide systematic and consistent support aimed at supplementing development and forming a firm collaborative working environment for the industry and academia in order to improve the current education environment and build a more field-oriented education environment.