• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.169-172
• /
• 2008

Recently, landscape lighting is more and more installing in many places such as park, cultural heritages, large-scale structures, bridges, apartment, and so on. However, there is no the government-set official estimation for standard wages constructing luminaries for landscape lighting. The cost of construction is estimated based on the standard wages of related-similar installations such as internal lighting fixtures or the designer's subjective decision. Sometimes, it is overestimated or underestimated. In this paper, the fundamental process for estimating the standard wages constructing luminaries for landscape lighting is studied. The estimation method of standard wages constructing lighting fixtures was examined on the basis of the type and capacities of luminaries, installation places, type and shapes of installation auxiliary materials, worker's skill, and etc. As a result, some results obtained in this work were significantly, different with the standard wages for internal electric wiring published by Korea Electric Association. In the future, to improve the accuracy of the estimation of the standard wages for constructing luminaries for landscope lighting, detailed factors related to the installation condition and dimensions and types of luminaries should be considered.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1406-1411
• /
• 2005

The creep rupture data for type 316LN stainless steels were collected through literature survey or experimental data produced in KAERI. Using these data, polynomial equations for predicting creep life were obtained by Larson-Miller (L-M), Orr-Sherby-Dorn (O-S-D) and Manson-Haferd (M-H) etc. time-temperature parametric (TTP) methods. Standard error of estimate (SEE) values for the each parameter was obtained with different temperatures through the statistical process of the creep data. The results of L-M, O-S-D and M-H methods showed good creep-life prediction, but M-H method showed better agreement than L-M and O-S-D methods. Especially, it was found that SEE values of M-H method at $700^{\circ}C$ were lower than that of L-M and O-S-D methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.74-80
• /
• 2005

A number of creep rupture data for type 316LN stainless steels were collected through literature survey or experimental data produced in KAERI. Using these data, polynomial equations for predicting creep life were obtained by Larson-Miller (L-M), Orr-Sherby-Dorn (O-S-D) and Manson-Haferd (M-H) parameters using time-temperature parametric (TTP) methods. Standard error of estimate (SEE) values for the each parameter was obtained with different temperatures through the statistical process of the creep data. The results of L-M, O-S-D and M-H methods showed good creep-life prediction, but M-H method showed better agreement than L-M and O-S-D methods. Especially, it was found that SEE values of M-H method at $700^{\circ}C$ were lower than that of L-M and O-S-D methods.

• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.131-143
• /
• 2003

This treatise deals with the profitable suit image design of middle-aged men by examining visual effects in physical design. The sample of this study is people who lives in Kwangju, the Republic of Korea and 20-50 age's men and women. And it is very variety in each population statistics factors the differences of associate design visual effect which considering the difference of sex and age group, numbers of button, a figure and material pattern. Firstly, look into the associate design visual effect by sex and button number. In men's group, the style with three buttons was the most attractive and that with two buttons was the least attractive. In 50's group, the style with two buttons was the least attractive and those with 1.3 and 4 buttons were a little attractive. Secondly, in the difference of associate design with sex and shape, men's group was considered that standard type was the most attractive shape, women's group was thought that lean and standard types were the most attractive shape. So we can know that the attractive shape is different with sex. In the difference of association design with age and shape, 20's considered that standard type was the most modernistic and fat type was the least modernistic. 30's considered that lean type was the most modernistic and 50's thought that fat type and standard type were the most modernistic. Thirdly, see the sex and material pattern. In familarity, men's group considered that stripe pattern was more familiar than checks and plain patterns. And they considered that striped pattern and plain was more manly than checks. In sex and material pattern, 20's thought that plain was the most attractive, stripe was the next, and checks was not attractive. 40's estimated that plain and stripe were more attractive than checks. 50's judged that stripe was the most attractive material. Thus. the attraction is different with ages and material patterns.

• Water for future
• /
• v.10 no.1
• /
• pp.95-100
• /
• 1977

The empirical area-reduction method by W.M. Borland and C.R. Miller and its revised procedure by W.T. Moody were made of fitting the area and storage curves to the Van't Hul distributions. It should be noted that the reservoir is classified into one of the four standard types on the basis of the topographical feature of the reservoir in application of the method. In other words, this method did not take into account several considerafble factors affecting the mode of sediment deposition, but only the shape of the reservoir as a governign factor. This is why the method occasionally creates ambiguity in classification and accordingly leads to unexpected mode of deposition. This paper describes a generating an formula to decide the standard classification of four types Van's Hul distributions, taking into consideration quantitatively sediment-loss percent and capacity-inflow ratio as well as the shape of the reservoirs by multiple regression analysis using the least square method to get a better fit to the design curves. The result is expressed as $Y=-1.95+55.8X_1+0.14X_2+0.12X_3$ in which the the values of Y locate the standard type I through type IV in the range from ten to forty with the interval of ten. The regression analysis was correlated well with the standard errors of estimate of around two except for the case of the type IV. This formula does not give big difference from the Borland's work in general sityation, but it demonstrates acceptable results, giving somewhat precise replys for the specific reservoirs. Its application to the Soyang Lake, one of the largest reservoirs in the country, defined clearly the type II, while the original method located it in the boundary of the type II and type III.

• Quality Improvement in Health Care
• /
• v.25 no.2
• /
• pp.44-55
• /
• 2019

Purpose: To investigate whether changes in Medical Aid (MA) status are associated with unmet need and catastrophic health expenditure (CHE). Methods: Data from the 2010 to 2014 Korea Health Panel (KHP) were used. The impact of changes in annual MA status ('MA to MA,' 'MA to MA Exit,' 'MA Exit to MA,' and 'MA Exit to MA Exit') on unmet need (all-cause and financial) and CHE (10% and 40% of household capacity to pay) were examined using the generalized estimating equation (GEE) model. Analysis was conducted separately for MA type I and II individuals. Results: In 1,164 Medical Aid type I individuals, compared to the 'MA to MA' group, the 'MA to MA Exit' group had increased likelihoods of all-cause and financial unmet need. This group also showed higher likelihoods of CHE at the 10% standard. The 'MA Exit to MA Exit' group showed increased likelihoods at the 10% and 40% CHE standards. In 852 type II recipients, the 'MA to MA Exit' group had higher likelihoods of CHE at the 10% standard. Conclusions: Type 1 MA exit beneficiaries had higher likelihoods of all-cause and financial unmet need, along CHE at the 10% standard. Type I 'MA Exit to MA Exit' beneficiaries also showed higher likelihoods of CHE at the 10% and 40% standards. In type II recipients, MA exit beneficiaries had higher likelihoods of CHE at the 10% standard. The results infer the importance of monitoring MA exit beneficiaries as they may be vulnerable to unmet need and CHE.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1167-1171
• /
• 1993

A highly efficient hydropneumatic water supply system type BGY is designed and built in accordance with ISO standard. The technical features of BYG type pump unit can be summarized as follows: - reduce hydropneumatic tank capacity at the ratio of 1/10 - 1/30 compared with conventional method. - ISO standard pumps can be used. - the development of highly efficient water supply system type BYG is based on long-term experiences with the proven constant pressure water supply technique which minimize pressure fluctuation, rapid pilsation, etc. The text contains the operation principle of BYG type water supply system, introduction of closed cycle control process focused on Mini PC and experimental results of type BYG-IVS-90x45.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.97-103
• /
• 2011

This study is numerical analysis on flow characteristic in a standard cyclone dust separator. The cyclone dust separator is widely used in a industrial applications as a method for dust removed from gases. In cyclone chamber, a very complex flow field is formed, involving the interaction between highly swirling velocity and turbulent field. Numerical analysis with computational fluid dynamics(CFD) was carried out to investigate the working fluid that flow into cyclone dust separator. Helical entry type was increasing flow rate compared with tangent entry type. And according to increasing pressure difference was increased fan power. But, helical entry type was high performance dust separator, in comparison with tangent entry type.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.4
• /
• pp.71-78
• /
• 2011

This paper contains the selection of operation parameters for protection and control of steam turbine in a Korea Standard Type Nuclear Power Plant. The safety of nuclear reactor must be ensured which generates nuclear energy and produces steam. Also, the safety of turbine, which consume the nuclear energy as a core machine, must be ensured. For the purpose of this, we describe how the operating parameters were selected, reviewed, implemented into the operator console and finally put into actual operation of the system.

• The Korean Journal of Community Living Science
• /
• v.12 no.2
• /
• pp.75-87
• /
• 2001

This study examines the impact of marital conflict and conflict-coping type on the marital satisfaction of rural married person. Data were obtained from 476 who married living in rural area. The major finding of this study are as follows. First, marital conflict were shown to be low, while in terms of degree of seriousness, envirnmental, interpersonal and intrapersonal are in descending order. Also, husband perceived marital conflict higher than wife. On the whole husband and wife used more reasoning coping type. And marital satisfaction was higher in husband's side. Second, living standard and conflict-coping types influence on marital satisfaction of rural men and women who married. That is, the higher husband perceived living standard and the less they used verbal aggression behavior and physical violence behavior and then the higher they perceived marital satisfaction. And the higher wives perceived living standard, they used more reasioning behavior and then the higher they perceived marital satisfaction.