• 제목/요약/키워드: Standard reference material

검색결과 240건 처리시간 0.023초

흑연로 원자 흡광 광도기와 유도 결합 플라즈마 질량 분석기를 이용한 인체 혈중 카드뮴 농도 비교 (Comparison of Human Blood Cadmium Concentrations using Graphite Furnace Atomic Absorption Spectrometry (GF-AAS) and Inductively Coupled Plasma-mass Spectrometry (ICP-MS))

  • 권정연;김병권;임현주;서정욱;강민경;김유미;홍영습
    • 한국환경보건학회지
    • /
    • 제44권5호
    • /
    • pp.491-501
    • /
    • 2018
  • Objectives: The aims of this study were to compare concentrations and the correspondence of human blood cadmium by using graphite furnace atomic absorption spectrometry (GF-AAS) and inductively coupled plasma-mass spectrometry (ICP-MS), which are representative methods of heavy metal analysis. Methods: We randomly selected 79 people who agreed to participate in the research project. After confirming the linearity of the calibration curves for GF-AAS and ICP-MS, the concentrations of cadmium in a quality control standard material and blood samples were measured, and the correlation and the degree of agreement were compared. Results: The detection limit of ICP-MS (IDL: $0.000{\mu}g/L$, MDL: $0.06{\mu}g/L$) was lower than that of GF-AAS (IDL: $0.085{\mu}g/L$, MDL: $0.327{\mu}g/L$). The coefficient of variation of the quality control standard material showed stable values for both ICP-MS (clinchek-1: 5.35%, clinchek-2: 6.22%) and GF-AAS (clinchek-1: 7.92%, clinchek-2: 5.22%). Recovery was relatively high for both ICP-MS (clinchek-1: 95.1%, clinchek-2: 92.8%) and GF-AAS (clinchek-1: 91.4%, clinchek-2: 98.8%), with more than 90%. The geometric mean, median, and percentile of blood samples were all similar. The agreement of the two instruments compared with the bias of the analytical values found that about 81% of the analytical values were within ${\pm}30%$ of the deviation from the ideal reference line (y=0). As a result of the agreement limit, the value included in the confidence interval was about 94%, which shows high agreement. Conclusion: In this study, we confirmed there was no significant difference in concentrations of a quality control standard material and blood samples. Since ICP-MS showed lower concentrations than GF-AAS at concentrations below the method detection limit of GF-AAS, it is expected that more precise results will be obtained by analyzing blood cadmium with ICP-MS.

해양퇴적물내 다환방향족탄화수소 분석을 위한 표준작업절차서 제안 (Proposal of Standard Method for the Analysis of Polycyclic Aromatic Hydrocarbons in Marine Sediments)

  • 이효진;김기범;최윤석
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제14권3호
    • /
    • pp.163-175
    • /
    • 2011
  • 현재 국내의 수많은 연구기관과 대학에서 다양한 화학분석법과 기기를 이용하여 다환방향족탄화수소(polycyclic aromatic hydrocarbons, PAHs)자료를 산출해 내고 있으나, 자료에 대한 엄격한 정도관리가 이루어지지 않은 관계로 자료를 산출한 상대 기관에 대한 신뢰가 부족하고, 농도에 대한 절대 비교가 불가능한 경우가 많았다. 그러므로 본 연구에서는 최신의 분석방법으로 국내외학술지 및 연구보고서에 게재되어진 20여 편의 참고문헌으로부터 보편적으로 받아들여지는 분석방법과 자료질을 조사하여 이를 반영한 표준작업 절차서를 제시하였다. 이 절차서에 따라 표준물질 첨가법으로 회수율을 검정하였을 때 좋은 회수율 값을 보여주었다. 또한 PAHs 분석하고 있는 기존의 연구 기관들의 경우 굳이 실험법을 바꾸지 않더라도 표준시료의 사용 등 환경정도관리를 통해 산출되어진 자료가 신뢰성을 획득할 수 있는 방안을 절차서 내에 포함하였다.

컴파운딩 업체의 TDABC 적용사례 연구: K사 TDABC 적용 및 수익성 개선 (TDABC Application Case Study of Compounding Company: TDABC Application and Improvement of Profitability of Company K)

  • 류대영;이성욱
    • 아태비즈니스연구
    • /
    • 제14권2호
    • /
    • pp.101-118
    • /
    • 2023
  • Purpose - The purpose of this study is to find out how a company can do reasonable cost calculations in a simple way and establish profitability improvement strategies based on the results. Design/methodology/approach - In this study, a case that compounding company K applied TDABC was studied. A case study was conducted on the process of company K reviewing and applying TDABC and the process of implementing the cost calculation for each product by applying TDABC, and establishing a profitability improvement strategy for each product based on the results. Findings - Company K rearranged the production standard information of the compounding industry such as productivity and batch size of each product to apply TDABC. Cost calculation was performed for each product according to the revised production standard information. After the cost calculation for each product was carried out, Company K established a strategy to improve profitability of each product. The profitability improvement strategy was implemented in two ways: a cost reduction strategy and a product price increase strategy. As a result of the final strategy execution, the profitability of each product was improved. Research implications or Originality - This study found a reasonable costing standard in consideration of the specificity of the research target company, and applied it to cost calculation cost for each product. It contains the process of establishing production and sales strategies for each product based on the cost calculation results. It is expected that this case study will serve as a good reference material for establishing cost calculation and profitability improvement strategies in similar businesses.

microSelectron-HDR System에서 부인암 강내조사에 쓰이는 세 가지 Applicator Set들의 Ovoids에 대한 차폐효과 연구 (The Study of Shielding Effect on Ovoids of Three Different Gynecological Applicator Sets in microSelectron-HDR System)

  • 조영갑;박성용;최진호;김헌정;김우철;노준규;김주영
    • Journal of Radiation Protection and Research
    • /
    • 제23권4호
    • /
    • pp.259-266
    • /
    • 1998
  • Nucletron사의 microSelectron-High Dose-Rate(HDR) System에서 부인암의 강내 근접치료에 사용되는 Standard shielded applicator set(SSAS)와 Fletcher-Williamson applicator set(FWAS)는 standard applicator set(SAS)와 비교해서 다른 점이 ovoids 위와 아래 부분에 방광과 직장으로 가는 선량을 줄이기 위해 각각 스테인레스 강철(밀도 ${\varrho}=8,000\;kg/m^3$)과 텅스텐 합금(밀도 ${\varrho}=14,000\;kg/m^3$)으로 차폐가 되어 있다. 이에 본 연구에서는 특별히 고안한 지지장치를 사용해서 국제방사선단위위원회(ICRU) 보고서 38에서 권고한 직장과 방광의 위치에 대하여 두 shielded ovoids의 차패효과가 어느 정도인가를 알아보고자 하였다. 지지장치를 PTW사의 전산화된 3차원 물펜톰에 부착하고 SAS의 ovoids를 지지장치에 고정하였다. Ovoids의 끝 부분을 전리함(PTW 0.125cc)의 측정점 높이와 일치시키고 전리함을 좌우로 이동시키면서 선량을 측정하여 두 ovoids의 중간 위치를 확인하였다. 직장에 미치는 선량은 ovoids의 중간에 위치한 선원 M5로부터 posterior방향으로 수직으로 위치한 점들인 20(Rl) 25(R2) 30(R3) 40(R4), 50(R5), 60(R6) mm에서 측정하였다. 방광에 미치는 선량은 M5로부터 anterior방향으로 수직으로 위치한 점들인 20(Bl), 30(B2), 40(B3), 50(B4), 60(B5) mm에서 측정하였다 위와 같은 방법으로 SSAS와 FWAS의 ovoids에서도 각각의 점들에 대한 선량을 측정하였다. SAS와 SSAS의 직장에 미치는 선량차이는 실제 임상에서의 관심 점들과 가장 가까운 25 mm(R2)와 30 mm(R3)거리에서 각각 8.0% 6.0%였고 SAS와 FWAS의 직장에 미치는 선량차이는 25 mm(R2) 와 30 mm(R3)거리에서 각각 25.0% 23.0%로 나타났다. SAS와 SSAS의 방광에 미치는 선량차이는 20 m(Bl)와 30 mm(B2)거리에서 각각 8.0% 3.0%였고 SAS와 FWAS의 방광에 미치는 선량차이는 20 mm(Bl)와 30 mm(B2)거리에서 각각 23.0%, 17.0%로 나타났다. SAS를 SSAS나 FWAS로 대체하였을 때 직장에 미치는 선량은 SSAS는 최대 8.0 %, FWAS는 최대 26.0 %까지 감소되고 방광에 미치는 선량은 SSAS는 최대 8.0 % FWAS는 최대 23.0%까지 감소됨을 알 수 있었고 FWAS가 SSAS 보다 차폐효과가 더 좋은 것으로 나타났으며 이 두 종류의 shielded applicator set는 부인암의 근접치료시 직장과 방광으로 가는 선량을 감소시켜 환자치료의 최적화를 이룰 수 있을 것으로 생각된다.

  • PDF

중금속분석용 하천수 매질표준물질을 이용한 숙련도 결과 평가 (Evaluation of the proficiency testing results using river water-based reference materials for heavy metal analysis)

  • 송기봉;김영희;신선경;이수영;김현정;강학구;김일규;안희주
    • 분석과학
    • /
    • 제23권3호
    • /
    • pp.284-294
    • /
    • 2010
  • 하천수 시료를 이용한 중금속분석용 수질표준물질, NIER-I08RW 및 NIER-I09를 제조하여 납, 카드뮴, 크롬, 구리 등 중금속 4 종에 대한 인증분석 및 불확도 등을 평가하였다. 균질성 평가 결과, 병간균질도가 숙련도시험의 목표표준편차의 0.3 배 이하로서 숙련도시험용 시료로서 사용하기에 충분히 균질한 시료인 것으로 확인되었다. 제조된 표준물질을 이용하여 국내 환경측정분석기관을 대상으로 숙련도시험을 실시하고, 설정값의 설정방법에 따른 로버스트 Z 값의 변동을 비교하였다. 다른 항목에 비해 농도가 낮은 NIER-I08RW의 카드뮴 항목을 제외하고는, 특성값과 참가기관의 합의값의 차이인 상대편차, $B_{relative}$는 모두 ${\pm}$1 이하로서 크지 않았으며, 설정값을 달리 설정함으로 Z 값이 달라진 경우는 46 개로서 전체의 2.9%에 불과하였다.

레이저유도붕괴분광법을 활용한 토양의 정량분석 (Quantitative Elemental Analysis in Soils by using Laser Induced Breakdown Spectroscopy(LIBS))

  • 장용선;이계준;이정태;황선웅;진용익;박찬원;문용희
    • 한국토양비료학회지
    • /
    • 제42권5호
    • /
    • pp.399-407
    • /
    • 2009
  • 레이저 유도붕괴 분광법(LIBS)은 물질상태(고체, 액체, 기체)에 상관없이 신체 접촉시 오염 우려 및 미량 시료도 전처리 없이 동시에 많은 종류의 원소 분석으로 분석과정이 단순하고 신속하게 분석이 가능하며, 소형화된 레이저의 개발로 시료의 직접적인 채취가 어려운 조건의 현장분석에도 적합하다. 농산물 안정성 평가나 친환경 농업 및 정밀농업을 위한 조사 등에 활용될 수 있는 비파괴 실시간 정량분석기술로서 LIBS 분석법의 토양분석 가능성을 평가하고자 표준광물, 미국의 표준기술연구소의 표준토양, 미국 테네시주 초지 및 밭토양을 대상으로 토양 구성성분의 정성 정량적 분석에 필요한 측정조건을 조사하고 이를 토대로 LIBS에 의한 농도값과 기존의 화학분석법을 통해 측정한 결과를 비교하였다. LIBS 측정은 펄스형 Nd:YAG 레이저(Minilite II, Continuum, Santa Clara, CA)에서 나오는 1064 nm 에너지 파장의 광원을 시편의 플라즈마를 생성시키는데 사용하였고, 25 mJ/pulse 여기 에너지 빔을 펄스폭 35 ns, 펄스 반복 주기 10 Hz, 노출시간 10 s 동안 시료의 표면에 조사하였다. LIBS 분광은 0.03 nm의 해상력으로 200 nm에서 600 nm의 영역에서 50 m 이하로 분쇄하여 원형 펠렛 형태로 압축시킨 시료를 10 rpm의 속도로 회전시키면서 상온 상압의 실험실 조건에서 수행되었다. LIBS를 이용한 토양 중 주요한 원소의 적정 파장(nm)은 Al(I) 309.2 nm, Ca(I) 422.6 nm, Fe(I) 406.4 nm, Mg(I) 285.2 nm, Na(I) 589.2 nm, Si(I) 288.2 nm, Ti(I) 398.9 nm 이었다. LIBS의 피크강도가 물질 중 원소의 농도가 증가됨에 따라 각 원소의 특정 파장대에서 일정하게 증가되는 것으로 나타나고 있으나 표준물질의 LIBS의 신호비와 원소비를 통해 측정된 검량곡선의 상관계수($r^2$)는 0.863에서 0.977의 범위로 원소별로 상이할 뿐만 아니라 0.98에 미치지 못하였다. 또한, 토양 중 분석대상원소에 대하여 기존 ICP-AES에 의한 표준방법으로 분석된 시료의 측정값과 비교하여 상대적인 오차는 대략적으로 (-)40%에서 80%이상이며, 평균오차는 32.2%로 표준척도 20% 이상을 초과하였다. LIBS에 의한 토양분석은 토양의 조성과 입자의 크기에 따른 매질효과(matrix effect)로 표준물질의 검량곡선에서 결정계수가 낮고, 원소별 함량도 기준의 표준방법과 비교할 때 오차가 컸다. 따라서 LIBS에 의한 토양분석은 정성적인 분석 수준의 정밀도를 보였으며, 토양 매질의 영향을 최소화하기 위하여 기존의 분쇄 펠렛형 시료조제 및 회전측정 이외의 다양한 토양매질의 표준물질(standard reference material)의 확보, 새로운 전처리 방법 및 측정상 방법개선 등 신뢰성 있는 정량 분석을 위한 노력이 필요할 것으로 사료된다.

해양환경공정시험기준 제정/개정(안) 작성과정 소개: 중금속과 유기물질 분석 중심으로 (The Restoration/Revision Processes of the Korean Standard Methods for Marine Environment: Heavy Metals & Organic Compounds)

  • 정용훈;이동기;양재삼
    • 한국해양학회지:바다
    • /
    • 제21권2호
    • /
    • pp.78-90
    • /
    • 2016
  • 본 보고는 2014년 수행된 해양환경공정시험기준의 제정/개정(안)작성의 전체과정에 대한 안내 보고이다. 제정/개정(안) 작성과정은 수요자 설문조사, 인증표준물질(CRM) 분석을 통한 QA/QC 확인절차, 전문가 자문회의 3단계로 수행되었다. 이번 제정/개정(안) 작성과정에서 다섯 가지 주요 개선방안은 다음과 같다. 첫째, 해양환경 특유의 시료채취, 운반, 보관, 및 전처리에 관한 상세한 내용이 추가되었고, 둘째, 유기물질의 항목별 분석방법에서 되도록 동일한 초자기구와 유기용매를 사용할 수 있도록 편의성을 추구하였으며, 셋째, 인증표준물질(CRM) 분석과정을 통하여 QA/QC 검정을 수행함으로써 신뢰성을 확보하였으며, 넷째, 다양하고 새로운 정량기기에 대한 사용방법을 기술함으로써 편의성을 제고하였고, 다섯째, 분석절차를 쉽게 기술함으로써 사용자의 범위를 넓혔다. 이런 노력을 통해 향후 기대효과는 첫째, 철저한 QA/QC 과정을 거침으로써 국제적인 수준의 신뢰성과 동등성을 확보하고, 둘째, 사용자의 폭을 넓힘으로써 국가표준으로서 신뢰성과 대표성을 갖도록 하였다. 이번 제정/개정(안)에 포함하지 못한 몇 가지 내용은 향후 관련기관과 협조를 통해 조속히 해결될 수 있을 것으로 기대한다.

수입 유가공품 중 트랜스 지방산 함량 분석 (The Analysis for Trans Fatty Acids in Dairy Products Imported to Republic of Korea)

  • 박재우;박지성;정두경;송성옥;운재호;김진만;위성환
    • 한국축산식품학회지
    • /
    • 제31권3호
    • /
    • pp.477-483
    • /
    • 2011
  • 본 연구는 유가공품에 적용할 수 있는 트랜스 지방산 분석조건을 확립하고 우리나라로 수입되는 유제품의 트랜스 지방산 함량 수준을 확인하기 위해 실시되었다. 조지방 추출은 Rose-Gottlieb법으로 조제분유 표준인증물질을 분석하고 그 인증값과 비교하였던 바, CODEX 가이드에 부합되는 정확도를 나타냈다. 유제품의 트랜스 지방산 분석을 위해 가스크로마토그래프 오븐 온도 상승 조건을 다양하게 변형하여, 트랜스 지방산들이 양호한 분해능을 보이면서 분석되는 적합한 온도 조건을 제시하였고, 최적화된 분석법을 사용하여 우리나라로 수입되는 유가공품(13개 유형, 45제품)에 적용하였다. 수입되는 유제품의 트랜스 지방산 함량은 제품 100 g 당 0.1-5.4 g 범위를 나타내었다. 가장 많이 수입이 되는 치즈류는 0.1-2.4 g/100 g 제품(평균값 1.1 g/100 g, n=35)으로 확인된 반면, 치즈를 제외한 유가공품은 1.7-5.4 g/100 g 제품 수준이었다. 이러한 트랜스 지방산 함량은 반추동물의 제1위 미생물에 의해서 생성되어 우유 중에 존재하는 트랜스 지방산 함량수준이며, 원료로 사용되는 우유의 트랜스 지방산 함량이나 부가적으로 첨가되는 식물성 지방에서 유래되는 트랜스 지방산의 함량에 따라 검사대상 유제품에서 함량의 차이는 편차가 있을 것으로 평가하였다

생체내 혈중 납 표준물질의 제조 (In Vivo Preperation of Standard Reference Materials of Lead in Blood)

  • 정규철;최호춘
    • Journal of Preventive Medicine and Public Health
    • /
    • 제28권4호
    • /
    • pp.863-873
    • /
    • 1995
  • This report describes a preperation and characterization of canine blood lead(Pb) standard reference material(SRM). Three adult beagle dogs(A, B, and C)were orally dosed with gelatin capsules containing $Pb(NO_3)_2$, equivalent to $10\sim80mg$ Pb/kg body weight. Blood was drawn 24 hours after the dose from the cephalic vein into lead free 500ml Pyrex beaker in which EDTA.K was contained as an anticoagulant. The amount of lead given to individual dog was varied arbitrarily. Three month later, 3 canine animals were orally dosed with lead secondarily to make mixed SRM(D1) which was mixed different concentrations of lead in bloods with A1, B1, and C1 in vitro. The SRMs for A, B, C, A1, B1, C1, and D1 were distributed 2ml each into more than 300 lead free bottles, and were stored in refregerator at $4^{\circ}C$. The amount of lead in canine whole blood samples were determined using a Varian 30A atomic absorption spectrophotometer(AAS) with a model GTA-96 graphite tube atomizer with D2 background correction and a Hitachi Z-8100 AAS with Zeeman background correction. The sensitivity and detection limits for lead determination of Varian 30A were $0.46{\mu}g/L,\;0.34{\mu}g/L,\;and\;0.56{\mu}g/L,\;0.14{\mu}g/L$ of Hitachi Z-8100, respectively. Day to day variations in determination of blood lead concentration in a certain sample were $31.11{\pm}1.36{\mu}g/100ml$ by Varian 30A, and $33.08{\pm}0.82{\mu}g/100ml$ by Hitachi Z-8100, showing the difference of 3% between the two results. At the blood lead concentrations of $56.31{\pm}1.98{\mu}g/100ml(A),\;40.89{\pm}0.80{\mu}g/100ml(B),\;59.01{\pm}1.38{\mu}g/100ml(C)$, the precisions of replicated measurements by AAS were 3.52%, 1.96%, and 2.34%, respectively. Coefficient variation(CV) of SRMs(A, B, and C) within a standard sample were ranged from 0.92% to 7.50%, and those between 5 standard samples were 1.21%, 2.64%, and 1.11%, respectively, showing inter-vial variation of $1{\mu}g/100ml$. Lead levels in SRMs during one month storage were unchanged. The overall recoveries were $89.6\sim100.4%,\;91.6\sim101.9%,\;90.3\sim100.0%$ for A, B, and C SRMs, means were $56.46{\pm}2.69{\mu}g/100ml,\;39.35{\pm}1.89{\mu}g/100ml,\;57.40{\pm}2.31{\mu}g/100ml$, and measurement ranges were$52.88{\pm}59.26{\mu}g/100ml,\;37.47{\pm}41.68{\mu}g/100ml,\;54.80{\pm}60.69{\mu}g/100ml$, respectively. Those results were laid within confidence limits values. The lead concentrations in the mixed sample(D1) stored over one month period were ranged from $32.76{\mu}g/100ml\;to\;33.54{\mu}g/100ml$, with CV ranging from 1.2% to 2.7%. The results were similiar to each of single samples(A1, B1, and C1) in respect of homogeneity and stability. Results of the mixed blood sample analysed after 1 month storage at $4^{\circ}C$ by four other laboratories(L1, L2, L3, L4) were similar with those of our laboratory($L5;31.18{\pm}0.24{\mu}g/100ml$, acceptable range by $CDC;25.18\sim37.18{\mu}g/100ml$), showing the concentrations of $25.91{\pm}1.19{\mu}g/100ml(L1),\;34.16{\pm}0.22{\mu}g/100ml(L2),\;35.68{\pm}0.85{\mu}g/100ml(L3),\;30.95{\pm}0.46{\mu}g/100ml(L4)$ in a each samples.

  • PDF

Accuracy and reliability of stitched cone-beam computed tomography images

  • Egbert, Nicholas;Cagna, David R.;Ahuja, Swati;Wicks, Russell A.
    • Imaging Science in Dentistry
    • /
    • 제45권1호
    • /
    • pp.41-47
    • /
    • 2015
  • Purpose: This study was performed to evaluate the linear distance accuracy and reliability of stitched small field of view (FOV) cone-beam computed tomography (CBCT) reconstructed images for the fabrication of implant surgical guides. Material and Methods: Three gutta percha points were fixed on the inferior border of a cadaveric mandible to serve as control reference points. Ten additional gutta percha points, representing fiduciary markers, were scattered on the buccal and lingual cortices at the level of the proposed complete denture flange. A digital caliper was used to measure the distance between the reference points and fiduciary markers, which represented the anatomic linear dimension. The mandible was scanned using small FOV CBCT, and the images were then reconstructed and stitched using the manufacturer's imaging software. The same measurements were then taken with the CBCT software. Results: The anatomic linear dimension measurements and stitched small FOV CBCT measurements were statistically evaluated for linear accuracy. The mean difference between the anatomic linear dimension measurements and the stitched small FOV CBCT measurements was found to be 0.34 mm with a 95% confidence interval of +0.24 - +0.44 mm and a mean standard deviation of 0.30 mm. The difference between the control and the stitched small FOV CBCT measurements was insignificant within the parameters defined by this study. Conclusion: The proven accuracy of stitched small FOV CBCT data sets may allow image-guided fabrication of implant surgical stents from such data sets.