• Korean Security Journal
• /
• no.9
• /
• pp.133-153
• /
• 2005

The suggestions that follow are about the effectual operating device for private security service. First, in legal and institutional policy, new establishment by law for private security and more support from government is asked. Moreover, the restructuring or M&A between petty companies and the pricing for security service should be performed. Second, in the structural aspect of private security industry, the professional education center for private security guards should be established and the terms of payment and welfare should be improved to the level above standard. In addition, it should be achieved to change the public to have a new and correct understanding of private security and develop the specialized parts suited to the characteristic and ability of each companies. Third, the construction of operating system for private security service should be achieved; recruit system for competent security guards, marketing strategy and enforcement system, widely known confidence to client, normal training system for security guards and post management system for client. This is also to be suited to the characteristic of each companies.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.87-93
• /
• 1997

A Special purpose program, based on the dimensional analysis, was developed to estimate the wide band turbulent noise in the blower of vehicle airhandling system. Acoustic power level was measured at 4 rating points around the operating condition. The experiment was performed on the reference blower model using international standard chamber, which could measure acoustic power according to the air-handling performance. Analytical model of the blower noise was determined by the measured data. Using the analytical acoustic model, it was possible to estimated the effect by the change of the operating condition, such as flow rate, static pressure and wheel rotating speed, furthermore, the diameter and the width of blower.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.443-445
• /
• 2006

In this paper, we present a model-driven approach to RTOS(Real Time Operating System)-based embedded software development and an automated tool that can produce RTOS-specific code. we defined generic RTOS APIs(Application Programming Interface) that are not bound to any specific RTOS but can provide most of typical RTOS services. The generic RTOS APIs can be used as a means for describing application's RTOS-related behavior from design stage. Out tool, called Trans-PI, is able to produce specific 'C' code aimed at POSIX(Portable Operating System Interface for UNIX)-complicant RTOSs. And it is also configurable to target other RTOSs that do not conform to the POSIX standard.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.3
• /
• pp.100-106
• /
• 2009

As an effort to prevent environmental problems caused by ozone depletion and global warming, alternative refrigerants are being developed, and one of the candidates is carbon dioxide. To overcome slightly low efficiency of $CO_2$ refrigeration system, air-conditioning cycle using an ejector was suggested. Ejector compensates throttling loss in an expansion device by reducing compression work. In this study, the ejector refrigeration cycle using $CO_2$ as a refrigerant is investigated to understand the effect of the mixing section diameter and refrigerant charge amount on the performance. If mixing section diameter is too large or too small, either cases show low performance. The optimum refrigerant charge amount which gives the best performance is found for standard operating conditions. The air-conditioning cycle was analyzed for several operating conditions.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.1
• /
• pp.91-102
• /
• 2020

Earthquakes and volcanic information can vary in type and extent, from raw data to processed data. In order to be able to analyzed and modeled, information needs to be opened in any formats and provided with metadata from the Korea Meteorological Agency and related data production organizations. We propose the metadata and data registry related to volcanic disasters in a form that can be used in conjunction with the Korea Meteorological Administration system that manages earthquake and volcanic data in Korea. The standard registry refers to a virtual system that checks the standards developed for over 20 years in the field of geographic information and receives information registration to grasp the location of geographical features. It is not only data from natural disasters such as earthquakes and volcanoes, but also national environmental survey results, and the cooperation system with other organizations dealing with national land information is also important, so a registry that creates and operates standards is necessary. Therefore, creating and operating the standard registry is necessary and expected to contribute to academic openness and data-driven policy.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.371-373
• /
• 2005

An enhancement for a transmission and substation equipment in power system make the system impedance to be lower. In principle, if the system impedance become low, system stability will be better, but the fault current become very higher. It is a very big problem for CB operating. As a fact of CB operating performance, high amplitude of the fault current may cause CB operation failure because of exceeding standard value in TRV. So we simulated TRV by using the EMTP. Generally there are two types of TRV in actual power system. One is short line fault, the other is bus terminal fault. In this paper, we simulated the TRv at short line fault as installed current limit reactors to reduce fault current in 345kV ultra-high voltage system. Short line fault is caused from single line fault in transmission line.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.991-996
• /
• 2010

In this paper, we designed a parallel I/O control system using IEEE 1284 operating modes and implemented remote control communication under the internet environment. The IEEE 1284 standard defines an interface compatible with several distinct operation modes and brings higher performance to the PC parallel port. Therefore, parallel port devices become easier to configure and simplify interface because new operating systems bring PnP function to the parallel port with the Device/ID identification sequence. With these enhancements, the parallel port become an even better low-cost, readily available I/O port on the PC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1473-1478
• /
• 2011

Since IT technology was combined with the power system, many systems and applications have been developed and also Integration between systems has been followed in order to meet much higher level. Futher more to reduce the cost of system integration there were needs standardized data model and interfaces among systems or applications. so IEC has reached to establish standard interfaces and data model. Most of the current distribution automation system in South Korea, each operating independently in an enclosed environment, are managed. As time goes by, however, because of resons that the system is increasingly complex by implenting new kind of power source and demand for electricity is rapidly increasing, it became difficult to predict with a independent data from one system. In this paper, In order to apply common infomation model and standard interfaces which are defined in IEC 61970/61968 to the exisiting distribution automation system in KEPCO, several software tools and applications which have been created will be introduced.

• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.689-696
• /
• 2012

A small integral reactor SMART (System Integrated Modular Advanced ReacTor), being developed in Korea since late 1990s and targeted to obtaining a standard design approval by the end of 2011, is introduced. The design scope and level for design certification (DC) is well described in the U.S. NRC SECY documents published the early 1990s. However, the documents are valid for a one-step licensing process called a combined operating license (COL) by the U.S. NRC, while Korea still uses a two-step licensing process. Thus, referencing the concept of the SECY documents, we have established the design scope and level for the SMART DC using the contexts of the standard review plan (SRP). Some examples of the results and issues raised during our review are briefly presented in this paper. The same methodology will be applied to other types of reactor under development in Korea, such as future VHTR reactors.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.19-33
• /
• 1999

This paper is concerned with developing a standard costing model based on the case study of PECT and GCT and analysing their profitability in order to improve operation efficiency and design business strategy. In doing so, the model can be a useful tool to analyze current calculation system of lease charge at the two terminals and to judge whether the level of lease charge currently applied to them is justifiable for their profitability. This paper also deals with break-even analysis of container terminal operating companies on the basis of the model and forecast of their profitability. On the top of that, it tries to look into the arguments and to suggest proposals for improving their profitability.