• Journal of the Korean Data and Information Science Society
• /
• 제16권2호
• /
• pp.451-456
• /
• 2005

We introduce the standard two-sided power normal distribution and consider the relation between the probability in standard two-sided power distribution and the probability in standard two-sided power normal distribution and obtain the even moment of the special two-sided power normal distribution including the cases considered by Gupta and Nadarajah(2004)

• 품질경영학회지
• /
• 제25권1호
• /
• pp.182-192
• /
• 1997

The well-known standard normal distribution has been used within the limit of standard variable value of u=3.59. However, the probability values above the limit are not given in the literature. In this study, a probability computation program for standard normal distribution to u=5.99 with the proportional normal distribution a, pp.oximation suggested by Abramowitz and Stegun, Hastings is developed. The new standard normal distribution table developed by the program is presented and will be of help to estimate of probability values for testing and estimation of process mean value, lot acceptable probability, defective percentage of PPM unit of an out-of specification limit, process capability, test power of control charts, probability and statistics.

• Communications for Statistical Applications and Methods
• /
• 제7권1호
• /
• pp.285-290
• /
• 2000

We noted a property of a stationary distribution on the matrix C, which is the covariance matrix of order statistics of standard normal distribution That is the sup norm of th powers of C is ee' divided by its dimension. The matrix C can be taken as a transition probability matrix in an acyclic Markov chain.

• 대한수학회지
• /
• 제46권6호
• /
• pp.1267-1276
• /
• 2009

This paper presents a method for approximation of the standard normal distribution by using hyperbolic tangent based functions. The presented approximate formula for the cumulative distribution depends on one numerical coefficient only, and its accuracy is admissible. Furthermore, in some particular cases, closed forms of inverse formulas are derived. Numerical results of the present method are compared with those of an existing method.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.707-712
• /
• 2008

The fatigue characteristics of a material or a structure are generally derived from fatigue tests of standard specimens. However, test results of standard specimens are different from those of real structures or components. Therefore, to calculate more accurate fatigue life, the geometrical effect and surface condition must be considered by comparing test results of standard specimens with those of real structures or components. Thus the object of this paper is to evaluate the fatigue characteristics of a real waterwork pipe. Also, to evaluate fatigue characteristic based on life distribution, the statistical fatigue characteristics were analyzed by the normal distribution and related data of P-S-N curve.

• Communications for Statistical Applications and Methods
• /
• 제16권4호
• /
• pp.707-711
• /
• 2009

We propose new cointegration tests using signs of the regressors as instrumental variable. Our tests have the asymptotic standard normal distribution and are free from the dimension of regressors under the null hypothesis of no cointegration. A Monte-Carlo simulation shows that the proposed tests have a stable size and an improved power. Particulary, the tests have better power for small numbers of observations.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.

• 한국수산과학회지
• /
• 제29권3호
• /
• pp.386-392
• /
• 1996

A numerical method based on genetic algorithms was introduced to characterize the grain-size distribution more effectively. This technique was proved significant particularly for multimodal size distributions, as was verified for samples from Korea Strait continental shelf. Sediment samples collected from the Korea Strait continental shelf revealed that $96\%$ of the grain-size distributions were multimodal. Therefore, the use of grain-size parameters was not the ideal method. As an alternative method, the decomposition of sue curves into elementary normal component curves was used. Means and standard deviations of 593 decomposed normal components were calculated by a numerical method from 268 size curves of Korea Strait sediments. The mean values of decomposed normal components showed peaks at $1\~3\phi\;and\;7\~9\phi$ size classes. The plot of mean and standard deviation values of the coarse fraction normal components on the map showed a characteristic areal distribution. The characteristic distribution was found to derive from underlying Pleistocene sediment on the basis of sea bottom geologic distribution of the area. The method of decomposition into normal components was found to be more effective than the analysis using traditional grain-size parameters in investigation of multimodal size distribution of Korea Strait shelf sediment.

• 콘크리트학회논문집
• /
• 제27권5호
• /
• pp.531-539
• /
• 2015

잔골재 표준입도를 고려하여 조파쇄 바텀애시를 혼입한 일반강도 모르타르의 성능을 실험적으로 분석하였다. 비교군으로서, 파쇄하지 않은 일반 바텀애시를 천연잔골재와 단순 치환하여 사용하였다. 바텀애시를 결합재와 일반 잔골재 사이의 입도를 갖도록 굵게 파쇄할 경우, 입자의 흡수율 및 표건상태 비중이 일반 잔골재 수준으로 조절되었다. 잔골재 표준입도를 고려해 조파쇄 바텀애시를 혼입하는 방법은, 바텀애시 원재료를 일반 잔골재와 단순 치환하던 기존의 배합방법에서 발생하던 모르타르의 유동성 감소 및 강도 감소를 동시에 막을 수 있는 해법이 될 수 있음을 확인하였다. 조파쇄 바텀애시를 30% 이내로 모르타르에 혼입할 경우, 모르타르의 동탄성계수 및 건조수축은 일반골재 모르타르에 비해 크게 변화하지 않았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1691-1694
• /
• 2005

The fatigue characteristic of a material or a structure is derived from fatigue tests of standard specimens. However test results of standard specimens are very different from those of real structures or components. Therefore, to calculate more accurate fatigue life, the geometrical effect and surface condition must be considered by comparing test results of standard specimens with those of real structures or components. Thus the object of this paper is to evaluate the fatigue characteristic of a real waterwork pipe by conducting fatigue tests with standard specimens and non-standard(plate-shaped) specimens of base metal and weld metal. Also, to evaluate fatigue characteristic based on life distribution, statistical fatigue characteristic was analyzed by the normal distribution and related data of P-S-N curve.