• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2006

The isotope dilution method was used for the determination of Br impurity in $1000{\mu}g/g$ Cl standard solution. Since relatively pure KCl salt was used for the preparation of the Cl standard solution, the Br impurity determination suffers from both spectral and non-spectral interferences due to the presence of a large amount of K and Cl matrices. AG2-X8 anion-exchange resin was employed to separate the Br analyte from the matrices, and RF power was raised to 1500 W and nebulizer gas flow rate was lowered to 0.77 L/min to reduce background from the $ArArH^+$ molecular ions. The Br impurity in the $1000{\mu}g/g$ Cl standard solution was determined to be 43.7 ng/g with the standard addition method. The analytical result was in good agreement with 41.2 ng/g (RSD 1.6%) determined by the isotope dilution method to lower uncertainty from poor reproducibility of the anion-exchange process.

• Korea Trade Review
• /
• v.48 no.2
• /
• pp.217-243
• /
• 2023

This study revealed practical implications by analyzing the clauses and disputable issues of the Korea Service Contract. Korea introduced Servcie Contract in the container part since Hanjin Shipping's bankrupcy and distributed the standard form(2019). After that, the standard form was revised during the supply chain crisis(2022). In the standard form, there are clause that require agreement due to conflicting interests of shipper and carrier. Therefore, the main clauses of the standard form were analyzed to derive the practical meaning to the both parties. In addition, in the process of introducing the standard form, the most disputable issues, liquidated damages and minimum quality commitment, were deeply analyzed to explain how shipper and carriers' benefit and loss differ as the clause changes. In conclusion, both parties must set LD at a very reasonable level so that they do not proceed separately with penalty. In addition, 'evenly' is a much more important than quantity for carrier in the establishment of MQC, so extra box option for shipper even during the peak season is needed to accommodate with service contract.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.2
• /
• pp.114-123
• /
• 2015

The BIM libraries and technical contents in order to develop common technical standards that reflect the contents for a BIM design support should be based. It is essential to redress the technological burden on design office requirements. The technical contents consisted of Material Information, Standard Details and Cost Information are made by system of standard classification. By connecting BIM libraries with each of information including the contents, it derives the consistent BIM data application through the integrated model. In addition, we look forward to introducing and applying BIM more easily through securing common technical contents which remove the pressure of engineering developments of each individual architectural design office and prevent overlapping investments.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.341-348
• /
• 2002

This manuscript introduces the Building Standard Law of Japan revised at 2000, June. Recently, The Building Standard Law of Japan was revised into the performance-based design format following the trend of international. The structural performance was evaluated for two limiting states; serviceability and soundness limit state, and safety limit state. The design earthquake forces were determined on the basis of seismic activities of the construction site, taking into consideration (a)characteristics of focal mechanism, (b)amplification by local surfaces geology, and (c)soil-structure interaction, in addition to the properties of the planned building including scale, configuration, foundation system, and structural characteristics.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.197-204
• /
• 1999

The extent of heavy metal pollution in agricultural in soils near the abandoned mine land site was investigated using their concentrations from the 47 sampling sites in B mine. Samples were prepared using 0.1N HCI - Korean Standard Methods - and then analysed for Cd, Cu, Pb, As and Cr by Inductively Coupled Plasma Spectrometer. In addition, soil and mine tailing samples were sequentially extracted to investigate the chemical speciation of heavy metals in them. The soils in the vicinity of mining area are highly contaminated by heavy metals ranging up to 5.96mg Cd/kg, 253.3mg Cu/kg, 76.7mg Pb/kg, and 15.45 mg As/kg, according to the analysis of Korean Standard Methods. The heavy metal levels by the sequential extraction are much higher than its level by Korean Standard Methods, and little correlated with each other. Based on the results, it is suggested that the As pollution in agricultural soils near the AMLS should be dealt as of prior significance in establishing reclamation strategies for the area.

• Journal of Engineering Education Research
• /
• v.20 no.4
• /
• pp.3-11
• /
• 2017

In this study, more than 2,500 cases using TRIZ methodology for 10 years from 2006 to 2016 in S company were analyzed to identify which TRIZ tools have been used for solving field problems. In the previous studies, some attempts were made to analyze the utilization of TRIZ tools, but all of them were based on very limited surveys or cases. The results of this study show that 40 inventive principles were most used, followed by separation principles, standard solutions, trimming, modeling using little people, patterns of evolution, ARIZ and Effects. In addition, detailed analysis were performed for widely used tools such as 40 inventive principles, separation principles, standard solutions, etc. The analysis would be a useful guide for the study and application of TRIZ tools in industry.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.2
• /
• pp.5-27
• /
• 2008

The purpose of this paper based on the preliminary research is to dove)or the standard job models for children's service of public and children libraries in Korea. To do so, the author surveyed and analysed the perception of library staff of current jobs for children's service using the online questionnaire. And author proposed the standard models(importance difficulty, professionalism, and performance requirements) of library jobs for strengthening children's services. In addition, the this study suggested a plans to enhance professionalism of children's librarian and to introduce its qualification system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.439-440
• /
• 2008

Five floor coverings were tested with three different types of floor structures in the standard test building in order to evaluate the effectiveness of the floor impact sound reduction. The level of floor impact sound reduction is influenced by not only the types of floor coverings but interrelationship between the floor coverings and floor structures. From the tests, it was found that floor coverings were effective in reducing the floor impact sound using the light impact source. In addition, proper mixtures of the floor structure and the floor covering have shown effectiveness to a certain extent in reducing the floor impact sound using the heavy impact source.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1998.05a
• /
• pp.22-22
• /
• 1998

This paper reviews the benefits of users participation in IMT-2000 standardization by the creation of users coalitions, focusing in particular on phased standards strategy necessary for the evolutionary approach from second generation to third generation systems. It first presents in detail the current status of IMT-2000 standardization progress occurring at each regional standard body including TIA of US, ETSI of Europe, TTA of Korea and ARIB of Japan. With this clear understanding of standardization situations worldwide, we may be able to come up with our standards strategies related to IPR issues and efficient standard-setting mechanism between manufacturers and service providers. In addition, this paper addresses the necessity for phased licensing of IMT-2000 service in order to avoid the high cost of new infrastructures and ensure an acceptable financial investment returns for existing cellular and PCS service providers. An author hopes that this paper can provide the adequate standardization directions of IMT-2000 to satisfy the varying regional and global market requirements.