• Title/Summary/Keyword: Standard Site Method

검색결과 494건 처리시간 0.028초

커프크기와 측정부위에 따른 혈압측정치 비교 연구 (A Comparative Study of Blood Pressure According to Cuff Size and Measurement Site)

  • 송미령;김은경
    • 기본간호학회지
    • /
    • 제16권1호
    • /
    • pp.6-13
    • /
    • 2009
  • Purpose: The purpose of this study was to identify differences in blood pressure according to cuff size and measurement sites of the participants. Method: The participants consisted of 50 women and 50 men whose upper arm circumference was $26\sim30cm$. They had no chronic illness and gave consent to participate. Blood pressure of the wrist was measured in the sitting position, the upper arm with a standard cuff, large and small cuffs were used for measurement in supine position and the thigh in prone position. The data were analyzed with paired t-test using SPSS 12.0 program. Result: The data for the upper arm showed a difference in systolic and diastolic blood pressure depending on the site of measurement. There was a significant difference between measurements with a standard cuff and measurements with large and small cuffs. The systolic blood pressure of the wrist and the thigh were significantly lower than that of the upper arm. Conclusion: These results suggest that the selection of an appropriate cuff is an essential element in ensuring accuracy when measuring blood pressure and differences in systolic blood pressure for the upper arm, wrist and thigh indicate the need to record the measuring site when measuring blood pressure.

  • PDF

지형공간정보체계를 적용한 농장의 적지분석에 관한 연구 (Analysis of Suitable Site for Farmastead using GIS)

  • 이신호;오무영;최진용;김한중
    • 대한공간정보학회지
    • /
    • 제3권2호
    • /
    • pp.173-181
    • /
    • 1995
  • 전형적인 도시근교 농촌지역으로서 충청북도 청원군 지역에 대하여 농장적지 선정을 위하여 지형공간 분석을 실시하였다. 본 연구에서는 논밭적지와 개발제한구역, 거주지 적합 등급이 높은 지역을 제외하고 농장적지 등급을 5등급으로 구분하였다. 수지고도자료(DEM)와 정밀토양도, 행정경계도, 수계도, 개발제한구역 등을 수치자료화 하였고, 점수표를 작성하여 등급기준을 결정할 수 있도록 하였다. 본 연구의 결과는 지형공간정보체계(CGIS)가 주변 환경에 대한 영향을 고려하고 과학적인 적지선정을 통하여 농가소득 향상을 위한 농장적지 선정에 좋은 도구임을 보여주었다.

  • PDF

현장 중심적 경영혁신에 관한 연구 (A Study on the Management Innovation of the Spot)

  • 김기정
    • 산업진흥연구
    • /
    • 제2권2호
    • /
    • pp.23-29
    • /
    • 2017
  • 본 연구는 제조업의 위기탈출을 위한 새로운 방법을 제시하고자 현장 중심적 경영혁신 추진 내용을 정성적 성과와 정량적 성과로 나누어 살펴보았다. 현장 중심적 경영혁신은 관리자 중심의 관리방식에서 현장관리사원 중심의 관리 방식으로 전환하여 현장관리 사원이 당면한 문제점을 신속히 해결해가도록 도와주고 지원해 주는 조직으로 현장경영 교육을 통해서 일과 일이 아닌 것을 구분, 자신이 하고 있는 일의 낭비요인을 찾아 개선하고 고객의 요구에 맞추어 공정기준을 설정한다. 현장관리사원은 작업을 하기 전에 내가 할 일의 공정기준을 정확히 숙지하고, 사용할 원자재의 규격이 일치하는지 자주 검사를 실시하고, 자주 검사를 실시 후 규격을 검토하여 이상이 없으면 다음 공정에 인계해 주는 방법으로 교차 검증을 실시한다. 본 연구결과를 통해 제조기업의 경쟁력 제고를 위해 유용하게 활용될 수 있다. 급변하는 국제적 경영환경 변화에 적응하기 위해 새로운 경영혁신 기법이 요구되는 바, 본 연구가 이를 위한 또 하나의 시사점을 제공한 데 그 의의가 있다.

Splice Site Detection Using a Combination of Markov Model and Neural Network

  • M Abdul Baten, A.K.;Halgamuge, Saman K.;Wickramarachchi, Nalin;Rajapakse, Jagath C.
    • 한국생물정보학회:학술대회논문집
    • /
    • 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
    • /
    • pp.167-172
    • /
    • 2005
  • This paper introduces a method which improves the performance of the identification of splice sites in the genomic DNA sequence of eukaryotes. This method combines a low order Markov model in series with a neural network for the predictions of splice sites. The lower order Markov model incorporates the biological knowledge surrounding the splice sites as probabilistic parameters. The Neural network takes the Markov encoded parameters as the inputs and produces the prediction. Two types of neural networks are used for the comparison. This method reduces the computational complexity and shows encouraging accuracy in the predictions of splice sites when applied to several standard splice site dataset.

  • PDF

GIS에 의한 의사결정 시스템 구축에서 AHP의 적용기법 (AHP application method for construction of decision making system by using GIS)

  • 양인태;박재훈;최광식
    • 산업기술연구
    • /
    • 제18권
    • /
    • pp.27-34
    • /
    • 1998
  • According to growing interest in environmental quality with improvements of a standard of living site selection problems such as waste landfill sites, caused regional conflicts. This study investigates a waste landfill estimation method that was used to for storage, management, analysis and display of environmental information provided by geo-spatial information system(GIS) and analytic hierarchy process(AHP) as a decision-making method. If GIS is integrated with AHP, site selection problems of environmental hatred facilities shall be able to be very useful, because of AHP with flexibility which appropriately reflects opinions of the related group.

  • PDF

동다짐공법에 의한 쓰레기매립지반의 개량특성 분석 (Improvement of waste landfill by dynamic compaction method)

  • 정하익;곽수정
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.404-410
    • /
    • 2002
  • Dynamic compaction is an efficient ground improvement technique for loose soils and waste landfill. The improvement is obtained by controlled high energy tamping and its effects vary with the soil properties and energy input. This study demonstrated the application of dynamic compaction method for the improvement of waste landfill in construction site. Various tests and measurements such as standard penetration test, bore hole loading test, crater settlement, ground settlement, pore water pressure were peformed during dynamic compaction field test. From the field test results, the efficiency of dynamic compaction method for the improvement of waste landfill was proved.

  • PDF

송전선로 건설공사 연삭 삭도공법 개발 (Development of a Transport Method to use Continuous Cableway System for Transmission Line Construction Work)

  • 백승도;민병욱;김상덕;최진성;김도화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
    • /
    • pp.679-681
    • /
    • 2005
  • The materials for transmission line construction were transported by road which opened in mountainous areas until the mid 1990s, However, from the mid 1990s, as social interest in the environment standard increases, a cable way and helicopter transport methods of construction have been applied to minimize damage to the environment and to build an environmental friendly system. The current cable way method is a single cable way system which has a lower section base to load materials into a carriage and carry them to the tower construction site by use of an engine and a main rope. Then the carriage lowers itself via a slope between the tower construction site and the lower section base. The single cable way system has the demerits of site acquisition for the lower section base, forest felling when installing the wire rope, and it is not applicable to a even topology Also it has to be installed separately at each tower site. Accordingly, to carry materials without forest felling and regardless of slope, the chain cable way system was developed to provide materials for more than two towers consecutively by use of an engine carriage and winch.

  • PDF

구조물-지반 상호작용 영향을 고려한 새로운 지반계수 평가방법에 대한 제안 (Proposed New Evaluation Method of the Site Coefficients Considering the Effects of the Structure-Soil Interaction)

  • 김용석
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2006년도 학술발표회 논문집
    • /
    • pp.327-336
    • /
    • 2006
  • Site coefficients in IBC and KBC codes have some limits to predict the rational seismic responses of a structure, because they consider only the effect of the soil amplification without the effects of the structure-soil interaction. In this study, upper and lower limits of site coefficients are estimated through the pseudo 3-D elastic seismic response analyses of structures built on linear or nonlinear soil layers considering the structure-soil interaction effects. Soil characteristics of site classes of A, B, and C were assumed to be linear, and those of site classes of D and E were done to be nonlinear and the Ramberg-Osgood model was used to evaluate shear modulus and damping ratio of a soil layer depending on the shear wave velocity of a soil layer. Seismic analyses were performed with 12 weak or moderate earthquake records, scaled the peak acceleration to 0.1g or 0.2g and deconvoluted as earthquake records at the bedrock 30m beneath the outcrop. With the study results of the elastic seismic response analyses of structures, new standard response spectrum and upper and lower limits of the site coefficients of Fa and Fv at the short period range and the period of 1 second are suggested Including the structure-soil interaction effects.

  • PDF

임목폐기물의 현장 재활용을 위한 퇴비화기술 (The Composting Techniques for On-site Recycling of Wood Waste)

  • 허영진;고정현;주백;안태영
    • 한국환경복원기술학회지
    • /
    • 제12권4호
    • /
    • pp.72-80
    • /
    • 2009
  • The main purpose of this study is as follows : Finding a solution for fresh wood chips to be used as an alternative growing-media through a study of the formation method of a compost base that is applicable on both construction site and composting factory to ferment fresh wood chips produced from construction site as well as a study on adjuvant or secondary materials. The result from the experiment plot using wood chips sized 50mm or less, manure and fertilizer mixed manure as a source of nitrogen to compost fresh wood chips has shown that the temperatures 9days and 3days after the beginning of the experiment reached to $49.0^{\circ}C$ and $40.4^{\circ}C$ respectively, the heating duration was 7days and 4days respectively, and the C/N ratio was 26.5 and 25.3, each satisfying the standard for composted manure (25.0~40.0). Also, the other result from another experiment plot using mixture of sandy soil and microorganism as an inoculation source of microorganism has shown that the temperature 10days after the beginning of the experiment reached to $67.6^{\circ}C$ and lasted 16days. The experiment plot using sandy soil has shown the highest figure of $5.3{\sim}108$ CFU/g in terms of number of microorganism. The result from the experiment plots for on-site composting of fresh wood chips have shown that the experiment plot that used sandy soil with fertilizer due to supply restriction of manure as a nitrogen source in construction site reached the high temperature of $54.7^{\circ}C$ after 3days of experiment beginning and maintained heating state for 17days and reached 30.6 of C/N ratio, satisfying the standard for composted manure.

현장성능시험에 의한 터보냉동기의 정상상태모델 개발 (Steady-state Modelling of Centrigugal Chiller through On-Site Test)

  • 장영수;신영기;백영진;김영일
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.83-88
    • /
    • 2001
  • This paper presents modelling and analyzing method of centrifugal chiller which has a rated capacity of 200 RT(703 kW) through on-site performance test. Field data of chiller installed in the clean-room building of KIST have been collected, Simple models were developed for predicting the heat exchangers and system performances by regression of chiller operation data during 5 days in August. The models proposed here account for the effect of variations of cooling capacity, temperatures and flow rates of secondary fluids. The models are consistent with real performance data from June to September within ${\pm}5%$ error. The COP of centrifugal chiller are estimated under the standard rating conditions and reduced mass flow rate of chilled and cooling water.

  • PDF