• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1217-1226
• /
• 2002

This study aims at the effective estimation of water supply capacity of small scale reservoir and the proposal of the data which is necessary to establish the water resources management plan of down stream area of the reservoir in the future by comparison and examination about reservoir operation technique for the security of agricultural water in small scale reservoir. The result of flow calculation by Tank model is used for the input data as the inflow data which is needed for the analysis of water supply capacity. Stochastic method, simulation method, and optimization method are used to examine the water supply capacity, and water security amount is compared with each method. From the analyses of water supply capacities by each method, slightly different results are shown in spite of the effort to compare them equally using input data such as inflow data under equal conditions, and the comparison of water supply capacities by each method are as follows; linear planning method, simulation method, and transition probability matrix method in the order of amount from the largest. It is thought that the simulation method in which comparatively reasonable application of the inflow data is possible and is simulated in successive time series dam operation of the three methods used in this study thus, simulation model is proper to estimate the water supply capacity of agricultural small scale reservoir. And it is judged that the heightening of efficiency of water resources utilization according to the development of downstream area of dam may be possible using the upward readjusted water supply amount of $55.18{\tiems}10^6ton$ and $63.7{\times}10^6ton$ at 95% and 90% supply reliability respectively which are above the planning water supply amount of $50.0{\times}10^6$ton when the simulation method is introduced as the standard.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.306-311
• /
• 2017

In the future ubiquitous network, information will collect data from various sensors in the field. Since the sensor nodes are equipped with small, often irreplaceable, batteries with limited power capacity, it is essential that the network be energy-efficient in order to maximize its lifetime. In this paper, we propose an effective network routing method that can operate with low power as well as the transmission of data and information obtained from sensor networks, and identified the number of sensors with the best connectivity to help with the proper placement of the sensor. These purposes of this research are the development of the sensor middle-ware to integrate the maritime information and the proposal of the routing algorithm for gathering the maritime information of various sensors. In addition, for more secure ship navigation, we proposed a method to construct a sensor network using various electronic equipments that are difficult to access in a ship, and then construct a communication system using NMEA(the national marine electronics association), a ship communication standard, in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.280-291
• /
• 2020

Objectives: Hazard classification is a controversial issue in the new MSDS system in which chemical companies have to prepare and submit MSDS for chemicals that they manufacture or import to the competent authorities according to the amended Occupational Safety and Health Act. The aim of this study is to suggest how to apply and manage harmonized hazard classification criteria and results by investigating current hazard classification systems and trends. Methods: The domestic issues about different hazard classification criteria and results were investigated by reviewing the literature and business outcomes regarding KOSHA. We also checked official and unofficial reports from the UN to understand international discussion about the topic. Chemical hazard classification results from agencies providing chemical information were analyzed to compare a harmonized rate between classifications. Furthermore, a field survey of a few chemical companies was conducted. Results: Under the related competent authorities, an integrated standard proposal was developed to harmonize the domestic hazard classification criteria. Although harmonized chemical information is strongly needed, we recognized the uncertainty and difficulty of harmonized hazard classification from the UN global list project review. In practice the harmonization rate of the classification was generally low between the classification in KOSHA, MoE, and EU CLP. Among hazard classes, health hazards largely led the disharmony. The field survey revealed a change of perception that the main body of chemical information production is manufacturers. Approaches and solutions about hazard classification issues differed depending on business size, types of chemical handling, and other factors. Conclusions: We proposed reasonable ways by time and step to apply hazard classification in the new MSDS system. Chemical manufacturers should make and offer chemical information including responsible hazard classifications. The government should primarily accept these classifications, evaluate them by priority, and support or supervise workplaces in order to communicate reliable chemical information.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.15-32
• /
• 2011

This study was carried out to investigate the soil characteristics and propose the management for the Monument Beobsoo Marsh, Korea. The soil properties of O.M, $Ca^{2+}$, $Na^+$ and CEC were higher and the soil properties of pH_{1:5}$ and $P_2O_5$ were lower the studied sites than other marsh sites in Korea. Although the Heavy metals such as Pb, Hg, Cd, Cu, Zn, Cr and As were lower compare to the safety standard of soil pollution in Korea, the overall conservation management plan based on long-term monitoring should be considered just because it varied by the point and non-point source pollution within the studied marsh. The source of water pollution varied due to non-point polluting origins such as sewage inlet, degraded terrain for agriculture, fishing sites, sites of removed water grasses, pesticides, chemical fertilizers, as well as fallen leaves. The creation of an artificial marsh is recommended due to the soil environment of the studied sites may be changed owing to the accumulated contaminants from the sources of both of point or non-point contaminants. The establishment of the zones of core, buffer and transition which is basic management structure of the UNESCO MaB could be applied to manage the studied site. Simultaneously the promotion of voluntary participation and education of the local residents are needed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.249-249
• /
• 2015

Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.95-103
• /
• 2016

The absolute value management method is widely used in the most of the earth retaining construction, which evaluates the safety by comparing measurement result and management criteria. Therefore, the management criteria is the standard to evaluate the safety of the site, and in other words, the criteria is a direct factor of the evaluation. That means that the safety of the site can not be acquired if the management criteria is not proper, even though the measurement system is perfectly set. However, many of field technicians do not have rely on the current management criteria, and they even recognize the necessity of the revision. Therefore, in this study, the necessity of the revision was studied. Also, the optimum criteria selection and the application were performed based on the test results of earth retaining deflection and probabilistic theory. The absolute value management method was used for this study. The details are tabulated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.43-50
• /
• 2020

The purpose of this study is to examine the case of constructing information and communication facilities in daycare centers and to propose an educational environment that can foster young talents who can lead the era of the fourth industrial revolution. In particular, after COVID19, a method was proposed to create an information and communication environment suitable for children to receive personalized education, and to create an environment for experiential education if possible, and at the same time to enable averaging of customized learning. Since there has been no research on information and communication facilities in daycare centers, we intend to place significance on starting, and in the future, to foster creative and contextual children, we will reduce the movement of teachers through smart speakers and mobile devices, and tailor the educational environment through AI data. I think that the design of the daycare center should be changed in the direction of making the product. To this end, the CM role of information and communication supervision is needed, and it is hoped that it will become a design standard for daycare centers after COVID19 by developing research on daycare centers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.212-215
• /
• 2016

In this paper, a 5.08 GHz Ring Voltage Controlled Oscillator(Ring VCO) was implemented using $0.18{\mu}m$ standard CMOS technology. The proposal Ring VCO is 3-stage structure. This research confirmed that the each stage's different transistor size ratio influence the current change and alter power consumption consequentially. This circuit is formed to control the current thereby adding the Current Mirror and to tune the frequency by supplying control voltage. It has an 65.5 %(1.88~5.45 GHz) tuning range. The measured output power is -0.30 dBm. The phase noise is -87.50 dBc/Hz @1 MHz offset with operating frequency of 5.08 GHz fundamental frequency. The total power consumption of Ring VCO is 31.2 mW with 2.4 V supply voltage.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.247-256
• /
• 2001

Software is developing toward having more large scale and many functions day by day. Also, user’s requirements level for software is being high, especially, requirements for software quality is being high continuously. Methods which can satisfy such User’s requirements is being studied in various viewpoint. First of all, study about quality evaluation system and methodology is energetically in progress in viewpoint to improve quality of software by feed-back software quality evaluation result to developers. In this paper, we define metrics according to a system and developed quality measurement tables according to internal characteristics system of quality characteristics, subcharacteritics, internal characteristics for reliability between quality characteristics of international standard, ISO/IEC 9126 about software quality. And we propose evaluation results about development products using internal characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.96-102
• /
• 2014

In this paper, we proposed new dual-rail data encoding that mixed 4-phase handshaking protocol and 2-phase handshaking protocol for asynchronous system design to reduce signal activities and power consumption. The dual-rail data encoding 4-phase handshaking protocol should leat to much signal activities and power consumption by return to space state. Ideally, the dual-rail data encoding 2-phase handshaking protocol should lead to faster circuits and lower power consumption than the dual-rail 4-phase handshaking protocol, but can not designed using standard library. We use a benchmark circuit that contains a multiplier block, an adder block, and latches to evaluate the proposed dual-rail data encoding. The benchmark circuit using the proposed dual-rail data encoding shows an over 35% reduction in power consumption with 4-phase dual-rail data encoding.