• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.561-564
• /
• 2009

In order to reduce damage from natural disasters, prevention activities through analysis and predicting based on meteorological factor and damage data is required. Other countries already have continuously studied on natural disasters and developed reducing disasters damage. But the risk assessment model for natural disaster is not to Korea. Therefore, a previous model of hurricane, Florida Public Hurricane Loss Model(FPHLM), is the basis and is applying to domestic situation. Accordingly, this study introduces the variables selecting process because input variables should be selected under Korea present state and be used. The estimating representative damage method would be necessary along with selecting housing types representing relevant areas because estimating damage amount of all over relevant areas housing was very hard during damage estimating process. But there is no exact representative housing types in the Korea. Therefore, we select housing types applicable to risk assessment model for natural disasters representing the Korea through previous studies and literature reviews. We using ASCE 7-98(Minimum Design Loads for Buildings and Other Structures, 1998) standard which estimated wind load using 3-second gust. ASCE 7-98 divided Main Wind Force Resistance System(MWFRS) and Component and Cladding(C&C) and it estimated wind load. Therefore, we estimate wind load affected by 3-second gust of a typhoon Maemi through calculating wind load process using selected representative detached house types in the process of selecting input variables for previous disaster predict model. The result of houses damage amount is about 230 hundred million won. This values are limit the 1-story detached dwelling, 19~29pyeong(62.81~95.56 $m^2$) of total area and flat roof. Therefore, this process is possible application to other type houses.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.2
• /
• pp.130-134
• /
• 2009

Objectives : A method of estimation using 8 populationbased cancer registries databases in Korea(KRCR DB) has been introduced as another strategy for validly estimating the national cancer incidence(NCI) in Korea. The purpose of this study was to evaluate the validity of this method with using the 7 KRCR DBs, excluding Seoul covering 21% of the total population of Korea. Methods : We designed the study method(NCSE_7) as same as the estimating method with using 8 KRCR DBs (NCSE_8) in order to ensure maximal comparability. We defined the expected number of cancer cases in each registry as the number of observed cases and then we added the weighted observed cases according to gender, age and the proportion of the population covered by each registry for the population of the seven regions and the population of all areas, with excluding these seven regions. From the expected number of total cancer incidents, the estimated NCI was calculated by dividing the expected number of cancer cases by the number of the total population. The standard error(SE) of the estimated incidence was also taken from the expected number of total cancer incidents. Results : Compared with the results of the NCSE_8, the overall age-standardized rates(ASR) in men and women became over-estimated and under-estimated, respectively. Primary sites that showed statistically significant differences were the colo-rectum, prostate, breast and thyroid. The index of death certificate only(DCO)and microscopically verified(MV)% indicating levels of data quality were decreased, especially for the brain in DCO% and kidney in the MV%. Conclusions : The database of Seoul regional cancer registry has a key role for the method to estimate the valid nationwide cancer statistics in Korea with using the population-based cancer registries databases.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.157-165
• /
• 2011

It is challenging to detect foreground objects when background includes an illumination variation, shadow or structural variation due to its motion. Basically pixel-based background models including codebook-based modeling suffer from statistical randomness of each pixel. This paper proposes an algorithm that incorporates Markov random field model into pixel-based background modeling to achieve more accurate foreground detection. Under the assumptions the distance between the pixel on the input imaging and the corresponding background model and the difference between the scene estimates of the spatio-temporally neighboring pixels are exponentially distributed, a recursive approach for estimating the MRF regularizing parameters is proposed. The proposed method alternates between estimating the parameters with the intermediate foreground detection and estimating the foreground detection with the estimated parameters, after computing it with random initial parameters. Extensive experiment is conducted with several videos recorded both indoors and outdoors to compare the proposed method with the standard codebook-based algorithm.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.367-377
• /
• 2012

(Estimating Compensation for Personal Information Infringement) As the value of personal information increases, personal information infringements is more likely to happen. The compensation for personal information infringements needs to be calculated in the process of infringement remedy. However, as personal information is regarded as non-market goods with no exchange price and calculating the remedy for mental sufferings from infringements has no guideline, it is not easy to determine the compensation amount. In this study, we adopt Contingent Valuation Methods (CVM) to analyze Willingness to Accept (WTA) of each type of personal information. Also, this study attempts to examine a standard model for calculating compensation by applying JNSA JO Model of Japan, which is not prepared in Korea. This study does not simply present a plan of estimating compensation. By measuring the value of personal information, it could awaken companies and organizations to the importance of personal information security.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.960-967
• /
• 2012

Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.73-84
• /
• 2006

Standard safety management cost system was established in 1988 as a decree Number of 88-13, first time. And then, it has been revised fourteen times, up to now. A lot of practical investigations have been made for the revision but many problems at sites are continued to be put out so that it should be revised. This study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. Budget and actually performed amount of safety management costs in this study are investigated. costs for temporary work which is clarified in Japan is collected in order to compare domestic cost rate with Japanese one related to the total project amount. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.779-783
• /
• 2021

The amount of sunlight (irradiation) acts as a very important factor for paprika (Capsicum annuum L.) productivity, but there are difficulties in developing a standard model for estimating paprika productivity using irradiation factors. This study was conducted to investigate how to increase the suitability of using irradiation as an independent variable when developing a standard model. In the linear regression analysis using the independent variable (cumulative irradiation) and the dependent variable (cumulative productivity) were classified as the average value of the total farm productivity (MTFP), and above and below (MHFP, MLFP) based on the average value, respectively. The RMSE value of the estimated linear regression model was 0.9418 kg·m^-2 in the MHFP, which was significantly lower than 1.5468 kg·m^-2 in the MTFP and 1.3812 kg·m^-2 in the MLFP. And in due course of time (month), RMSE value was also the lowest in MHFP, below 1.0 kg·m^-2 in all months. Therefore, when developing a regression model for estimating paprika productivity using irradiation, it is judged that it will improve the suitability of the estimation model by classifying and analyzing the difference in productivity of farms with an appropriate method.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.267-279
• /
• 2023

This research assessed the feasibility of using high-resolution aerial images and deep learning algorithms for estimating the land-use and land-cover areas at the Approach 3 level, as outlined by the Intergovernmental Panel on Climate Change. The results from different sampling densities of high-resolution (51 cm) aerial images were compared with the land-cover map, provided by the Ministry of Environment, and analyzed to estimate the accuracy of the land-use and land-cover areas. Transfer learning was applied to the VGG16 architecture for the deep learning model, and sampling densities of 4 × 4 km, 2 × 4 km, 2 × 2 km, 1 × 2 km, 1 × 1 km, 500 × 500 m, and 250 × 250 m were used for estimating and evaluating the areas. The overall accuracy and kappa coefficient of the deep learning model were 91.1% and 88.8%, respectively. The F-scores, except for the pasture category, were >90% for all categories, indicating superior accuracy of the model. Chi-square tests of the sampling densities showed no significant difference in the area ratios of the land-cover map provided by the Ministry of Environment among all sampling densities except for 4 × 4 km at a significance level of p = 0.1. As the sampling density increased, the standard error and relative efficiency decreased. The relative standard error decreased to ≤15% for all land-cover categories at 1 × 1 km sampling density. These results indicated that a sampling density more detailed than 1 x 1 km is appropriate for estimating land-cover area at the local level.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.211-222
• /
• 2020

The purpose of this study is to derive a plan to improve the standard of survey cost, which is a system for estimating survey cost operated by the National Geographic Information Institute. The current standard has not been revised significantly since the initial enactment. However, in the situation where the survey industry is getting worse, the actualization of the standard is an urgent task for training engineers and industrial development. In this study, in order to break the problems of the standard and to derive improvement plan, we analyzed the outline, basic characteristics, and history of the standard and compared it with similar domestic ones. We collected opinions from the government and the industry through a survey, and verified labor cost and overhead rates. The conclusions are as follows. First, it is necessary to complement standard for production rate that directly affects direct cost, and to compensate for the missing items in the direct cost. Second, when compared with cost standards in foreign countries and cadastre field, the labor cost in survey field was found to be very low and improvement is needed. Third, the overhead rates were assessed to be appropriate, and the problem of improper overhead design should be coped with by strengthening education and promotion. Fourth, it is necessary to consider the introduction of deliberation committee or standard market price system for rapid response to new technologies.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.571-577
• /
• 2019

Since the introduction of digital cameras in an aerial-photogrammetry field on 2006, the technological paradigm related to the photogrammetry has been shifting from the analog types to digital types. However, current construction standard cost for the aerial-photogrammetry and the digital mapping are being mixed with analog-based concepts and digital-based methods. In the current standard cost, the monthly weather table is closely related to the calculation of the number of flying days in a taking of aerial photograph. The current monthly weather table uses the results calculated from the observation data of total cloud amount from 1999 to 2007. In this study, the monthly weather table was calculated using the total cloud data during ten years from 2009 to 2018. As a result, the newly calculated number of clear days for 29 stations was analyzed as 44 days decreased by 6 days. The maximum number of clear days decreased in Jinju as 23 days, and the highest decreased clearing days was February.