• 한국측량학회지
• /
• 제27권4호
• /
• pp.445-452
• /
• 2009

항공라이다를 이용한 도시지역 3차원 모델링에 대한 연구가 활발히 진행되고 있으며, 이를 위한 최적 점밀도 결정은 도시지 역 3차원 모델링의 성과 및 효율적인 항공라이다 활용을 위해 매우 중요 하다. 본 연구는 도시지역 항공라이다의 최적 점 밀도 결정을 위해 표본 점 밀도를 선정 하였다. 각 표본 점 밀도별 DSM 및 건물 외곽선을 이용해 최적 점 밀도 결정을 위한 시각적 평가 및 정확도 검사를 실시하였으며, 도시지역 항공라이다를 위한 최적 점 밀도를 제시 하였다.

• 센서학회지
• /
• 제18권1호
• /
• pp.86-94
• /
• 2009

Temperature measurement capability was inter-compared using the transfer standard platinum resistance thermometers(SPRT) among four laboratories of KRISS. The transfer SPRTs were primarily calibrated at the triple point of water and Ga melting point, then used at inter-comparison experiment. Temperature difference of calibration value between temperature laboratory and length laboratory at $20^{\circ}C$ was -0.7 mK and +2.4 mK at density laboratory. Temperature measured near $20^{\circ}C$, $25^{\circ}C$ and $30^{\circ}C$ at fluid flow laboratory was deviated by $34.2{\sim}80.4\;mK$ from the calibration values of the transfer SPRT. Ga melting points was inter-compared among three laboratories, and the difference of Ga melting points against the standard Ga melting point of temperature laboratory were $0.03{\sim}0.54\;mK$ at length laboratory and 0.02 mK at density laboratory.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.40-41
• /
• 2020

As the capacity of the 3d scanner developed, the reverse engineering using the 3d scanner is emphasized in the construction industry to obtain the 3d geometric representation of buildings. However, big size of the indoor point cloud data acquired by the 3d scanner restricts the efficient process in the reverse engineering. In order to solve this inefficiency, several pre-processing methods simplifying and denoising the raw point cloud data by the rough standard are developed, but these non-standard methods can cause the inaccurate recognition and removal the key-points. This paper analyzes the correlation between the accuracy of wall recognition and the density of the data, thus proposes the proper method for the raw point cloud data. The result of this study could improve the efficiency of the data processing phase in the reverse engineering for indoor point cloud data.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.692-697
• /
• 1994

In the actual sound environmental systems, it seems to be essentially difficult to exactly evaluate a whole probability distribution form of its response fluctuation, owing to various types of natural, social and human factors. Up to now, we very often reported two kinds of unified probability density expressions in the standard expansion from of Hermite and Laguerre type orthonormal series to generally evaluate non-Gaussian, non-linear correlation and/or non-stationary properties of the fluctuation phenomenon. However, in the real sound environment, there still remain many actual problems on the necessity of improving the above two standard type probability expressions for practical use. In this paper, first, a central point is focused on how to find a new probabilistic theory of practically evaluating the variety and complexity of the actual random fluctuations, especially through introducing some equivalence transformation toward two standard probability density expressions mentioned above in the expansion from of Hermite and Laguerre type orthonormal series. Then, the effectiveness of the proposed theory has been confirmed experimentally too by applying it to the actual problems on the response probability evaluation of various sound insulation systems in an acoustic room.

• Wind and Structures
• /
• 제32권4호
• /
• pp.341-354
• /
• 2021

Articulated towers are one of the class of compliant offshore structures that freely oscillates with wind and waves, as they are designed to have low natural frequency than ocean waves. The present study deals with the dynamic response of a double-pendulum articulated tower under hydrodynamic and aerodynamic loads. The wind field is simulated by two approaches, namely, single-point and multiple-point. Nonlinearities such as instantaneous tower orientation, variable added mass, fluctuating buoyancy, and geometrical nonlinearities are duly considered in the analysis. Hamilton's principle is used to derive the nonlinear equations of motion (EOM). The EOM is solved in the time domain by using the Wilson-θ method. The maximum, minimum, mean, and standard deviation and salient power spectral density functions (PSDF) of deck displacement, bending moment, and central hinge shear are drawn for high and moderate sea states. The outcome of the analyses shows that tower response under multiple-point wind-field simulation results in lower responses when compared to that of single-point simulation.

• 디지털산업정보학회논문지
• /
• 제8권3호
• /
• pp.133-145
• /
• 2012

This paper describes the high density discrete wavelet transformation which is one that expands an N point signal to M transform coefficients with M > N. The double-density discrete wavelet transform is one of the high density discrete wavelet transformation. This transformation employs one scaling function and two distinct wavelets, which are designed to be offset from one another by one half. And it is nearly shift-invariant. Similarly, triple-density discrete wavelet transformation is a new set of dyadic wavelet transformation with two generators. The construction provides a higher sampling in both time and frequency. Specifically, the spectrum of the first wavelet is concentrated halfway between the spectrum of the second wavelet and the spectrum of its dilated version. In addition, the second wavelet is translated by half-integers rather than whole-integers in the frame construction. This arrangement leads to high density wavelet transformation. But this new transform is approximately shift-invariant and has intermediate scales. In two dimensions, this transform outperforms the standard and double-density discrete wavelet transformation in terms of multiple directions. Resultingly, the proposed wavelet transformation services good performance in image and video processing fields.

• 지구물리와물리탐사
• /
• 제22권2호
• /
• pp.56-61
• /
• 2019

셀 기반 유한 차분법을 사용하여 P파 속도와 밀도 변화를 고려한 3차원 시간 영역 음향 파동 전파 모델링에서 성능을 향상시킬 수 있는 방법을 살펴보았다. 일반적인 유한 차분법에서는 격자점에 탄성파 속도 또는 밀도와 같은 물성을 할당하고 계산하지만 셀 기반 유한 차분법에서는 이러한 물성을 격자점 사이의 셀에 할당한다. 격자점에서의 차분식 계산을 위해서는 주변 셀의 물성 평균값을 이용하는데 이로 인해 일반적인 유한 차분법에 비해 계산량이 증가하게 된다. 이 연구에서는 이러한 계산량 문제를 개선하기 위해 메모리를 추가로 사용하여 모델링 시간을 30 % 이상 줄일 수 있었다. 또한 밀도가 제한적으로 변화하는 매질에서 셀 기반 유한 차분법과 일반 유한 차분법을 함께 사용하여 모델링 성능을 추가로 향상시킬 수 있었다.

• Geomechanics and Engineering
• /
• 제6권5호
• /
• pp.487-502
• /
• 2014

A three dimensional finite element model was used to simulate rapid impact compaction (RIC) in loose granular soils using ABAQUS software for one impact point. The behavior of soil under impact loading was expressed using a cap-plasticity model. Numerical modeling was done for a site in Assalouyeh petrochemical complex in southern Iran to verify the results. In-situ settlements per blow were compared to those in the numerical model. Measurements of improvement by depth were obtained from the in-situ standard penetration, plate loading, and large density tests and were compared with the numerical model results. Contours of the equal relative density clearly showed the efficiency of RIC laterally and at depth. Plastic volumetric strains below the anvil and the effect of RIC set indicated that a set of 10 mm can be considered to be a threshold value for soil improvement using this method. The results showed that RIC strongly improved the soil up to 2 m in depth and commonly influenced the soil up to depths of 4 m.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.165-176
• /
• 2013

This paper introduces the high density discrete wavelet transform using quincunx sampling, which is a discrete wavelet transformation that combines the high density discrete transformation and non-separable processing method, each of which has its own characteristics and advantages. The high density discrete wavelet transformation is one that expands an N point signal to M transform coefficients with M > N. The high density discrete wavelet transformation is a new set of dyadic wavelet transformation with two generators. The construction provides a higher sampling in both time and frequency. This new transform is approximately shift-invariant and has intermediate scales. In two dimensions, this transform outperforms the standard discrete wavelet transformation in terms of shift-invariant. Although the transformation utilizes more wavelets, sampling rates are high costs and some lack a dominant spatial orientation, which prevents them from being able to isolate those directions. A solution to this problem is a non separable method. The quincunx lattice is a non-separable sampling method in image processing. It treats the different directions more homogeneously than the separable two dimensional schemes. Proposed wavelet transformation can generate sub-images of multiple degrees rotated versions. Therefore, This method services good performance in image processing fields.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.25-33
• /
• 2006

The reality of domestic prints neither possesses an objective standard of standard density nor a spectrophotometric method in regard to process ink. As a result, it creates a difficult communication between a designer and a Prepresser as to estimating the color of reproduction prints. There was an experiment on paper, ink, and printing company to obtain the standard point. The result shows that paper has minimum effect on color reproduction as opposed to ink and different printing companies, which had a great effect. The purpose of this paper is to confirm how different the color reproduction properties of prints are using densitometer and spectrophotometer for three different ink companies. The process color inks of three different companies were used under the same printing environment in this experiment.