• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.495-502
• /
• 2015

This study intended to provide basic data required in establishing policies for improving the forestry management and the compensation standard for the loss from non-timber forest products by examining the cost of cultivating key medicinal herbs and the earnings from them to analyze the income. According to the income analysis on the cultivation of medicinal herbs, the average annual income per unit area of Adenophora triphylla var. japonica Hara was the highest as it recorded 14,233,000 won/10a and was followed by Pleuropterus multiflorus TURCZ. which recorded 4,121,000 won/10a, Gastrodia elata Blume 3,766,000 won/10a, Epimedium koreanum Nakai 3,537,000 won/10a, Atractylodes ovata (Thunb.) DC. 2,655,000 won/10a, Aralia continentalis Kitagawat 1,048,000 won/10a, Paeonia lactiflora Pallas 1,025,000 won/10a, and Bupleurum falcatum L. 919,000 won/10a. Compared with the income from major nuts and fruits analyzed in 2014, the average annual income per unit area for medicinal herbs was relatively higher. For Adenophora triphylla var. japonica Hara and Aralia continentalis Kitagawat, soots are used for food and the roots for medicine, it appears that it can become a new income source for the farming and mountain villages. Meanwhile, the price for Paeonia lactiflora Pallas is dropping due to Chinese imports, and also damage to the income from other medicinal herbs due to Chinese imports is expected with the implementation of Korea-China FTA in the future.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.77-86
• /
• 2002

Current composites are made with dimethacrylate monomers and silane-treated silica microfillers, either alone or with silane treated glass fillers The main reasons for clinical failure of dental composites are secondary caries, wear and fracture. Most of practitioner want to get a composite which is more tougher under occlusal stress, less polymerization contraction, and better handling properties in application clinically. The aim of this study was to investigate the influence of resin matrix with various flows on the physical proper-ties such as fracture toughness and degree of conversion of the experimental resins. It was hypothesized that flexible or tough resin composites can be designed by judicious choice of monomer composition Various flow resin matrices containing Bis-GMA, UDMA, and TEG-DMA were made by altering the pro-portion of the monomers. After the unfilled resins were light-cured for different light intensity, the fracture toughness(K$_{1c}$) was measured according to ASTM standard using the single edge notched geometry, and degree of conversion(DC) was measured by FTIR. And experimental composites were formulated with variations in the proportion of silanated quartz and strontium glass fillers as 60, 75, and 77wt%. Also, the physical properties of composites with various filer contents were evaluated as same manner. All resulting data were compared by ANOVA/Tukeys test at 0.05 level. The results were as follows; 1. The degree of conversion of high flow resin containing less Bis-GMA was higher than that of low flow unfilled resin 2. While the degree of conversion of unfilled resin was increased according to light intensity for polymerization, there was no significant increase with moderate and high light intensity. Also, the fracture toughness was not increased by high light intensity. 3. The fracture toughness was high in the low flow unfilled resin containing higher contents of Bis-GMA. 4. There was a significant increase for fracture toughness and a tendency for degree of conversion to be reduced when the content of fillers was increased. 5. In the experimental composites, the flow of resin matrix did not affected on the fracture toughness, even, which was decreased as increase of viscosity. These results showed that the physical properties of a dental composite could be attributed to the flow of resin matrix with relative content of monomers. Specific combination of resin monomers should be designed to fulfil the needs of specific indication for use.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.83-90
• /
• 1990

The semiconducting $(Pb_1\;_xSn_x)_1$ $_yTe_y$, one of the low - temperature thermoelectric materials, has been prepared and its chemical composition and nonstoichiometry has been analyzed. The content of Pb in the specimens was determined by the complexometric back - titration method with EDTA and Pb(II) standard solutions. Te - content was analyzed with the redox titration method. The electrical conductivity and the thermoelectric power have also been measured by the DC 4 - probe and the heat-pulse technique, respectively. All of the specimens showed a nonstoichiometric behavior in their chemical compositions (Te excess), thus gave rise to a p - type semiconducting property, and the nonstoichoimetry became bigger as the Sn - content increased. The thermoelectric power vs. temperature results have been analyzed upon the basis of the Fermi level vs. temperature profiles in the saturation regime. The specimen of x=0.1 evolved a transition from p - to n - type property at about 670K, which has been explained by the fact that the mobility of electrons is bigger than that of holes in the temperature range of the intrinsic regime.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.967-972
• /
• 2003

The inner-diameter 5 cm cold hollow cathode ion source was designed for the high current density and the homogeneous beam profile of ion beam. The ion source consisted of a cylindrical cathode, a generation part of magnetic field, a plasma chamber, convex type ion optic system with two grid electrode, and DC power supply system. The cold hollow cathode ion sources were classified into standard type (I), electron output electrode modified type (II). The operation of the ion source was done with discharge current, ion beam potential and argon gas flow rate. The modification of electron output electrode resulted in uniform plasma generation and uniform area of ion beam was extended from 5 cm to 20 cm. Improved ion source was evaluated with beam uniformity, ion current, team extraction efficiency, and ionization efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Fisheries and Aquatic Sciences
• /
• v.24 no.11
• /
• pp.360-369
• /
• 2021

Paralytic shellfish toxins (PSTs) and tetrodotoxin (TTX) are neurotoxins that display pharmacological activity that is similar to that of specific sodium channel blockers; they are the principle toxins involved in shellfish and puffer fish poisoning. In Korea, puffer fish is a very popular seafood, and several cases of accidental poisoning by TTX have been reported. Therefore, it is necessary to determine whether puffer fish poisoning incidents are caused by PSTs or by TTX. In this study, we used mouse bioassay (MBA) and liquid chromatograph-tandem mass spectrometry (LC-MS/MS) to determine the presence of PSTs and TTX in puffer fish from an area near Mireuk-do, Tong-Yeong on the southern coast of Korea from January through March, 2014. The toxicity of PSTs and TTX extracts prepared from three organs of each specimen was analyzed by MBA. Most of the extracts killed mice with typical signs of TTX and PSTs. The LC-MS/MS analysis of seven specimens of Takifugu pardalis and Takifugu niphobles, each divided into muscles, intestines, and liver, were examined for TTX. In T. pardalis, the TTX levels were within the range of 1.3-1.6 ㎍/g in the muscles, 18.8-49.8 ㎍/g in the intestines, and 23.3-96.8 ㎍/g in the liver. In T. niphobles, the TTX levels were within the range of 2.0-4.5 ㎍/g in the muscles, 23.9-71.5 ㎍/g in the intestines, and 28.1-114.8 ㎍/g in the liver. Additionally, the toxicity profile of the detected PSTs revealed that dcGTX3 was the major component in T. pardalis and T. niphobles. When PSTs were calculated as saxitoxin equivalents the levels were all less than 0.5 ㎍/g, which is below the permitted maximum standard of 0.8 ㎍/g. These findings indicate that the toxicity of T. pardalis and T. niphobles from the southern coast of Korea is due mainly to TTX and that PSTs do not exert an effect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.670-680
• /
• 2010

A low power single-chip CMOS receiver for 60 GHz mobile application are proposed in this paper. The single-chip receiver consists of a 4-stage current re-use LNA with under 4 dB NF, Cgs compensating resistive mixer with -9.4 dB conversion gain, Ka-band low phase noise VCO with -113 dBc/Hz phase noise at 1 MHz offset from 26.89 GHz, high-suppression frequency doubler with -0.45 dB conversion gain, and 2-stage current re-use drive amplifier. The size of the fabricated receiver using a standard 0.13 ${\mu}m$ CMOS technology is 2.67 mm$\times$0.75 mm including probing pads. An RF bandwidth is 6.2 GHz, from 55 to 61.2 GHz and an LO tuning range is 7.14 GHz, from 48.45 GHz to 55.59 GHz. The If bandwidth is 5.25 GHz(4.75~10 GHz) The conversion gain and input P1 dB are -9.5 dB and -12.5 dBm, respectively, at RF frequency of 59 GHz. The proposed single-chip receiver describes very good noise performances and linearity with very low DC power consumption of only 21.9 mW.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.4
• /
• pp.323-330
• /
• 2006

This experiment was conducted to investigate heavy metal transition and bioavailability from soil to the edible pare of water dropwort near industrial complex. The soils were collected from the paddies cultivating water dropwort stream sediments, and background soils near industrial complex. The pH values, organic matter, Av. $P_2O_5$, Ex. Ca content of paddy soils were higher than those measured for nor-contaminated paddy fields in 2003. The contents of Cd and Cu was higher than those of standard level for soil contamination by Soil Environmental Conservation Act in Korea. The pollution index in stream sediments were higher than those of paddies cultivating water dropwort. The geoaccumulation index of heavy metals in paddy soils and stream sediment were in the order Cu>Cd>Ni>Zn>Pb. The rates of 0.1N-HCl extractable heavy metals to total contents in soils were in the order Cd>Cu>Zn>Ni>Pb. In case of Cd and Ni in paddy soils near industrial complex, 0.1N-HCl extractable heavy metals and total content were highly correlated with each other. Heavy metal contents in mot parts were higher than those in top pare of water dropwort. The Zn and Cu transfer factor from soil to the top pare of water dropwort were higher than those of other heavy metals. The bioavailability of water dropwort varied considerably between the different parts and heavy metals. Cd, Cu and Ni contents in water dropwort were correlated with each elements in paddy soils.

• Journal of Food Hygiene and Safety
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2002

This study was performed to investigate the possibility of water purification by a wild train of Oenanthe javanica DC. Three commercially available dishwashing detergents and a standard surfactant, linear alkylbenzene sulfonate (LAS), were used for this study. The experiment was done in 1.5 ι transluscent aquariums. The plants were distributed into various concentrations of detergents and various kinds of detergent in the separate aquariums. The wet weight of the plants was significantly decreased (p<0.05), and the visual vitality of the plants also decreased in 2 days. The higher the concentration of detergent was, and the more time the plants were exposed to the detergents, the more decrease of growth was observed. The pH value of the culture media decreased in 2 days and in 4 days, then slightly increased in 6 days. However, the pH value of the media did not return to the initial neutral level of pH in 6 days. The pH value of the culture media containing the LAS remarkably increased in 6 days and increased to a neutral pH value in 18 days (p<0.01) as the pH of the other culture media. The chemical oxygen demand (COD) of the culture media gradually increased over the 4 days. A decrease of COD was observed in 6 days, but no tendency was observed between 12 and 18 days. The detergent in the culture media was highly significantly decreased in 2 days (p<0.01) and gradually decreased after this. After 6 days the remaining detergent was 12.4∼23.7% from the various levels of initially added concentration, and 22.4 ∼34.2% from the flour kinds of detergents. These results show that the reduction of detergent was caused by Oenanthe javanica and the effect was significant during the first 6 days when the plants were still growing well. These results indicate that the plant purifies contaminated water for several days and the effect could be variable according to the level of contamination and the environment in which the plant grows.