• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.69-74
• /
• 2002

The following results are achieved from a mortar flow test depending on stainless steel slag fineness, replacement ratio, and a research on material age compressive strength, strength activity index. 1. Flow is proportional to the stainless steel slag fineness within the limits of 4000~8000$\textrm{cm}^2$/g, but in the case of fineness 20000$\textrm{cm}^2$/g flow decreases at all conditions except the case of replacement ratio 10%. 2. As stainless steel slag replacement ratio increases, Mortar of flow somewhat decreases. 3. As stainless steel slag blends, compressive strength decreases, but in proportion to the increase of age, compressive strength increases. 4. As stainless steel slag replacement ratio, compressive strength decreases. 5. In the case of stainless steel slag fineness 6000$\textrm{cm}^2$/g and 20.000$\textrm{cm}^2$/g, compressive strength of revelation ratio has the maximum value when it's replacement ratio is 10%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.311-316
• /
• 2002

The following results are achieved from a mortar flow test depending on stainless steel slag fineness, rate of replacement, and a research on material age compressive strength, strength activity index. 1. Flow is proportional to the stainless steel slag fineness. 2. Mixing stainless steel slag decreases compressive strength 3. Material age compressive strength has the maximum value when stainless steel slag fineness is 6000$cm^2$/g. 4. Material age 7day strength activity index satisfies KSCE 95-01 at all conditions except the case of fineness 8000$cm^2$/gㆍstainless steel slag rate of replacement 30%. 5. Material age 28day strength activity index satisfies KSCE 95-01 in case of stainless steel slag fineness 4000$cm^2$/gㆍrate of replacement 10%, fineness 6000$cm^2$/gㆍ10%, or 20%.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.32-37
• /
• 2005

The characteristics of the metal melting and radionuclide distribution of the radioactive has been investigated in a lab-scale arc furnace. The slag former based on the constituents of silica, calcium oxide, aluminum oxide, borate and calcium fluoride additions was used for melting of the stainless and carbon steel. In the melting of the stainless steel, the amount of slag formation increased with an increase of the concentration of the slag former. But the effects of the slag basicity on the amount of stag formation showed a local maximum value of the slag formation with an increase of the basicity index in the melting of the stainless steel as well as in the melting of the carbon steel. With an increase of the amount of slag former addition, the trends of the cobalt distribution into the ingot and the stag depended on the kind of slag former used in the melting of the stainless steel while the effect of the slag basicity on the distribution of the cobalt was not clarified in the melting of carbon steel. Tn the melting of the carbon steel, the strontium was captured at up to $50\%$ into the slag phase. Cesium was completely eliminated from the melt of the stainless steel as well as the carbon steel and distributed to the dust phase.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.90-96
• /
• 2018

본 연구에서는 탄소 포집 물질인 ${\gamma}-C_2S$를 함유하고 있는 Stainless Steel Slag AOD를 포함한 시멘트 페이스트의 역학적 및 미세구조 변화를 연구하였다. ${\gamma}-C_2S$는 비수경성이며 그러므로 물과 반응하지 않는다. 그러나 ${\gamma}-C_2S$는 물에 의한 탄산화 양생조건에서 반응성을 가지고 있다. 그 반응은 페이스트 안의 공극을 치밀하게 형성하기 때문에 STS-A를 사용한 시멘트 페이스트의 공극구조는 탄산화 ($CO_2$ 농도는 약 5%)후에 수은압입시험에 의해 측정될 수 있다. 또한 Fractal 특성은 시멘트 페이스트의 미세구조변화는 탄산화 영향에 대하여 연구하였다. 그 결과로부터 STS-A를 포함하는 탄산화 시멘트 페이스트는 강도가 증가하였고 공극구조는 더 치밀해졌다.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.272-276
• /
• 2003

High nitrogen-bearing stainless steel (HNS) containing more than Imass% N was successfully created by means of pressurized electro-slag remelting (P-ESR) without the addition of manganese. Excellent localized corrosion resistant properties of the HNS were confirmed in terms of pitting and crevice corrosion in artificial seawater. The repassivation kinetics proved higher repassivation rate for HNS.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.627-632
• /
• 2007

원자력 시설 해체시 발생되는 금속성 폐기물의 용융 제염을 위한 기초 연구를 위해 아크 용융로를 사용하여 스테인레스강과 탄소강의 금속 폐기물 용융시 슬래그 종류, 농도, 염기도에 따라 $^{60}Co$, $^{137}Cs$ 핵종의 주괴, 슬래그, 분진 상으로 분배 특성을 살펴보았다. $^{60}Co$은 90% 이상 주괴상에 균질하게 분포되었으며, 슬래그 상에는 약 10% 미만으로 잔존하며 슬래그 조성에 따라 분배특성이 크게 영향을 받지 않았으나, 유동성이 좋은 염기성 슬래그 형성제가 포함된 슬래그에서는 영향을 받음을 알 수 있었다. $^{137}Cs$는 스테인레스강과 탄소강의 용융체로부터 완전히 제거되어 슬래그상과 분진상 상으로 분배됨을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1316-1321
• /
• 1990

Molten steel level information of ladle is very important for process control in steelmaking process. At secondary refining process, measuring lance and snokel have to keep constant thier depth from molten steel surfaces. But, there is much slag on the molten steel surface. Besides, not only the thickness of slag is varied with refining condition, but also molten steel level is largely affected by firebrick errosion. Then, optical measuring method and/or by human eyes cannot detect true molten steel surface, but slag surface. This slag thickness is 300mm at maximum, then huge diameter eddy current sensor will be needed if that type sensor is applied. In addition to, cooling system is necessary because the molten steel and slag temperature is high. This is not practically. To solve this problem, immersion type levelmeter is developed. This sensor is made up from primary and secondary cylindrical coils. High frequency current is applied to primary coil. Electro-motive force from secondary coil is measured, which is varied with molten steel level. This complete set is installed within stainless steel long capsule and attached to top of lance. This sensor is immersed into molten steel bath of ladle or tundish with protection of expendable paper sleeve.

• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.497-504
• /
• 2008

In a study of the optimum operational condition for a melting decontamination, the effects of the basicity, slag type and slag composition on the distribution of depleted uranium were investigated for radioactively contaminated metallic wastes of iron-based metals such as stainless steel (SUS 304L) in a direct current graphite arc furnace. Most of the depleted uranium was easily moved into the slag from the radioactive metal waste. The partitioning ratio of the depleted uranium was influenced by the amount of added slag former and the slag basicity. The composition of the slag former used to capture contaminants such as depleted uranium during the melt decontamination process generally consists of silica ($SiO_2$), calcium oxide (CaO) and aluminum oxide ($Al_2O_3$). Furthermore, calcium fluoride ($CaF_2$), magnesium oxide (MgO), and ferric oxide ($Fe_2O_3$) were added to increase the slag fluidity and oxidative potential. The partitioning ratio of the depleted uranium was increased as the amount of slag former was increased. Up to 97% of the depleted uranium was captured between the ingot phase and the slag phase. The partitioning ratio of the uranium was considerably dependent on the basicity and composition of the slag. The optimum condition for the removal of the depleted uranium was a basicity level of about 1.5. The partitioning ratio of uranium was high, exceeding $5.5{\times}10^3$. The slag formers containing calcium fluoride ($CaF_2$) and a high amount of silica proved to be more effective for a melt decontamination of stainless steel wastes contaminated with depleted uranium.

• 대한화학회지
• /
• 제29권4호
• /
• pp.390-396
• /
• 1985

황산암모늄을 이용하여 훼로망간슬랙중에 망간만을 분리, 추출하고 황화암모늄으로 정제한 후 소량의 $H_2SeO_3$를 첨가제로 가하여 환원전극으로는 Stainless steel판을, 산화전극으로는 납(Pb + 1% Ag)전극을 이용하여 60mA/cm$^2$정도의 전류밀도에서 90%이상의 전류효율로 순수한 망간금속을 얻었다.

• 자원리싸이클링
• /
• 제10권3호
• /
• pp.37-42
• /
• 2001

21세기 철강산업에 요구되는 경제성, 환경친화성, 고효율성을 동시에 만족하는 슬래그 정련조업 조건을 슬래그 엔지니어링 개념에 입각하여 평가하였다. 제선 공정의 경우, 기존의 슬래그 조성에서 염기도를 증가시킴으로써 우수한 로내 통액성 및 향상된 용선품질 확보가 가능할 것으로 평가되었으며, COREX 조업에서는 ($SiO_2$+ $A1_2$$O_3$) 농도를 소량 감소시킴으로써 보다 우수한 유동성 및 정련능 확보가 가능한 것으로 예측되었다. 한편, Stainless Steel-AOD공정의 경우, 소량의 CaO농도 증가를 통하여 현재보다 양호한 정련능 확보가 가능함을 알 수 있었으며, 슬래그 중 (CaO+$A1_2$$O_3$)농도 증가를 통해 $CaF_2$의 사용량 감소를 이룩할 수 있을 것으로 예측되었다.