• Asian Journal of Turfgrass Science
• /
• v.5 no.2
• /
• pp.95-114
• /
• 1991

This paper was designed to estimate the interaction of the first productivity, light conditions and to analyze the ecophysiological productivity, growth characteristics grown under various shading conditions in Zoysia japonica . The results summarized this experiment were as follows; 1.After transplanting the grass, increasing rate of leaf number and total leaf length was remarkahly high at the early growth stage in the control and the 30% shading plot. 2.The increasing rate of leaf area ratio (LA R) in all the experimental plot was remarkable high at the early growth stage after transplanting the grass. Especially, the control and 30% shading plot in compared with another plots, were remarkably high at rate of leaf area. 3.The length and the node number of rhizome in the control and 30% shading plot were also high and the difference was significantly large by the growth stage. 4.Chlorophyll content was very high at 36days after transplanting and then decreased. Increasing rate of shade resulted in its low content. The rate of chlorophyll a to b was decreased by in-creasing rate of shade. 5.The content of soluble sugar in the control and 30% shading plot was low at the early growth after transplanting and high at the late growth stage. Its content in the plot of 70% shading was remarkably low throughout the growth stage. 6.The increasing rate of standing plant in all the experimental plots was high at the early growth stage after transplanting. Increasing rate of shade was typically low through all the growth stage.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2009

This study was conducted to improve commercial quality of a cut spray chrysanthemum 'Gama' bred in Korea by foliar application of daminozide (DMZ), suppressing excessive elongation of peduncle caused by high temperature in summer season production. Applications were made at three floral bud developmental stages (I, II, and III), and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. Both cut flower length and peduncle length showed the greatest suppression of elongation by DMZ treatments at stage II. DMZ also gradually reduced values of those in a concentration-dependant manner. Stem thickness and flower diameter reduced compared to control as DMZ was sprayed at later stage and those two characteristics decreased in a concentration-dependant manner. The number of paralleled flowers neighboring apical part of whole plant showed the best results at stage I and II. As for DMZ concentration, those increased effectively at $500-1,000mg{\cdot}L^{-1}$. Among all combinations, $1,000mg{\cdot}L^{-1}$ DMZ at stage II recorded the most paralleled flowers and showed 24.2% increment as compared to control. The number of fully expanded flowers and total floral buds also showed the highest values using $1,000mg{\cdot}L^{-1}$ DMZ at stage II than the other treatments. In cut spray chrysanthemum cultivar 'Gama' bred in Korea, foliar-spraying with $1,000mg{\cdot}L^{-1}$ DMZ at stage II most effectively suppressed excessive peduncle elongation, parallelled flower cluster arrangement, and increased the number of flowers in summer. However, this combination affected negatively the other commercial qualities, reducing cut flower length, stem thickness, and flower diameter. Therefore, we recommended that foliar-spraying stage and DMZ concentration was stage I and $1,000mg{\cdot}L^{-1}$, respectively, in a practical culture for 'Gama'.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.100-103
• /
• 2017

Motion estimation occupies the largest computation in the video compression. Multiple processing elements are often exploited in parallel to meet processing speed. More processing elements increase processing speed, but they also increase hardware area. therefore, it is important to optimize the number of processing element. HEVC (high efficiency video coding) usually exploits multi-stage motion estimation algorithms for low computation and high performance. Since the number and position of search points are different in each stage, the utilization of the processing elements is not always 100% and the utilization is quite different with the number of processing elements. In this paper, the optimizing method is proposed on the number of processing elements. It finds out the optimal number of the processing elements for the given multi-stage motion estimation algorithm by calculating utilization and execution cycle of the processing elements.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.237-240
• /
• 2000

This experiment was conducted to evaluate the effect of split application of nitrogen(N) on development of vascular bundle(VB) and yield components of rice. Two cultivars were used in this study; IR58, an indica type and Shinunbongbyeim a japonica type. The number and total cross sectional area of the VB in the peduncle and leaf blade were more and bigger in N split application than 100 percent basal fertilizer. Nitrogen split application at necknode differentiation stage increased the number and size of the VB. Nitrogen split application resulted in increased panicle number with application of N before transplanting and at tillering stage; increased spikelets number with N application at necknode differentiation stage; and increased spikelet fertility and 1000 grain weight with N application at necknode differentiation and heading stages. Grain yield increased 7-10% in N split as compared to all basal application. The total cross sectional area of VB in peduncle closely correlated with the number of spikelets per panicle. Nitrogen management can have an impact on spikelet differentiation through more and bigger VB and increase grain yield potential.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.895-904
• /
• 2001

Flow fields, temperature distributions, and particle trajectories in a 2-stage entrained-flow gasifier are calculated using a CFD code, FLUENT. Realizable k-$\xi$ model is used as a turbulent model. Because of swirling flow there appear recirculation regions near the burners. The characteristics of flow fields and temperature distributions in the gasifier are dependent on the swirl number of the system. Mean residence time of the particles in the reductor is inversely proportional to particle size, particle density and swirl number. As the swirl number is increasing, the particles injected from the combustor burners approach the wall near the combustor burners, which prevents the particles from entering the reductor and thus attatching the reductor wall. If the lower combustor burner angle is larger than the higher combustor burner angle for a given swirl number, the particles may move toward the reductor and cause ash/slag deposition problem.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.486-491
• /
• 2002

Spikelet number and its components of rice plant are closely associated with nitrogen accumulation and biomass production during panicle formation stage. To elucidate this relationship and also compare the differences of the sink formation efficiency among cultivars, spikelet number, its components, nitrogen content, nonstructural carbohydrate content, and plant dry matter were investigated under 5 nitrogen levels with two split application methods and shading treatments by using three rice varieties. The nitrogen amount in shoot at panicle initiation stage and at 15 days after panicle initiation showed significant positive correlation with primary rachis branches per square meter, and that at 15 days after panicle initiation and at heading stage with secondary rachis branches per square meter, Primary and secondary rachis branches per square meter showed positive significant correlation with the shoot dry weight at panicle initiation stage and at 15 days after panicle initiation stage, respectively, The amount of degenerated secondary rachis branches and spikelets per square meter showed significant negative correlation with the dry weight and nonstructural carbohydrate increase of stem during 15days after panicle initiation, and the contents of nonstructural carbohydrate at 15 days after panicle initiation. Spikelets per unit area showed significant positive correlation with nitrogen amount in shoot and shoot dry weight at heading stage. The sink formation efficiency expressed as the spikelet number produced by the unit amount of nitrogen in shoot at heading stage was higher in Nampoongbyeo than Choocheongbyeo and Hwaseongbyeo. Sink formation efficiency was negatively correlated with the dry weight increase of shoot and stem during reproductive stage. but not significantly with that of leaf in all varieties. Sink formation efficiency was not significantly correlated with nonstructural carbohydrate, but was significantly negatively correlated with structural carbohydrate increase during reproductive stage.

• Journal of Families and Better Life
• /
• v.8 no.1
• /
• pp.83-100
• /
• 1990

The purposes of the study are to understand of rural family life cycle(FLC) and to get a FLC model for the twentieth in rural area. Data for the study were collected from 603 farm households in rural area. The major findings are as follows; 1) The age of first marriage was 21.5 years old(urban : 22.4), the first bearing 23.2(24.2), the last bearing 31.7(32.6), the first child marriage 47.2(46.5), and the last child marriage 59.7(52.7). The number of child and interval were 3.9 persons and 2.9 years respectively. From the survey results, the rural family life cycle was established. Establishment stage(from the marriage to the 1st child birth) : 21-23 yrs. Extension stage(from the 1st child birth to the last child birth) : 23-32 yrs. Complete extension stage(from the last child birth to the 1st child's marriage) : 32-47 yrs. Shrinking stage(from the 1st child's marriage to the last child's marriage) : 47-60 yrs. Complete shrinking stage(from the last child's marri ge to the death of husband) : 60-63 yrs. Dissolution stage(from the death of husband to the death of wife) : 53-75 yrs. 2) In general, the older the age, the younger the first marriage age, the greater the number of child, and the longer the interval of child bearing. The last child's marriage was too last to have the period of recovery stage. In terms of FLC by marital chorts, the later the year of marriage, the older the age of the first marriage and first baby bearing, the smaller the number of child, and the faster the launching stage. The higher the educational level, the older age of the first marriage and the first baby bering, the smaller the number of child, and the shorter the interval of child bearing. 3) Two types of rural FLC model for the twentieth were formulated. Type A was formulated based on the survey results and type B was formulated based on 『'88 population dynamics survey』 of Economic Planning Board(EPB). 「TYPE A」*Establishment stage(from the marriag to the 1st child birth) : 22.5-23.5 yrs. one child : the 1st child's marriage(49.5yrs), the death of husband(64.2yrs), the death of wife(71.7yrs) two children : the last child's birth(25.7yrs), the last child's marriage(51.7 yrs) three children : the last child's birth(27.9yrs) the last child's marriage(53.9yrs) 「TYPE B」*Establishment stage(from the marriage to the 1st child birth) : 25.3-26.3 yrs. one child : the lst child's marriage(52.3yrs), the death of husband(67.0yrs), the death of wife(74.5yrs) two children : the last child's birth(27.8yrs), the last child's marriage(53.8 yrs.) three children : the last child's birth(29.3yrs), the last child's marriage(55.3yrs).

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.360-367
• /
• 2020

BACKGROUND: The productivity and quality of blueberry (Vaccinium ashei Reade) greatly depend on the number of fruits in a plant. Especially, fruit set more than appropriate number negatively affects productivity and marketability due to the increased number of small fruits and delayed harvest time. This study was conducted to investigate proper timing and concentration for applying chemical blossom thinners such as ammonium thiosulfate (ATS) and UREA. METHODS AND RESULTS: ATS at 1.25% and 1.50%, and UREA at 6% and 8% were applied in four developmental stages, bud swell, pink bud, full bloom and petal fall. Fruit thinning rate was calculated based on the number of fruits harvested divided by that of flowers before applying blossom thinners. Ratios of leaf to flower and leaf to fruit were calculated based on the number of fully developed leaves in 25 days after full blossom divided by that of flowers or fruits, respectively. Chemical injury of leaves was investigated by calculating the number of leaves with chemical injury divided by the total number of leaves. Fruit thinning rates were 48% and 66% for UREA treatments at 6% and 8%, respectively, and 49% and 62% for ATS treatments at 1.25% and 1.50%, respectively, in the full bloom stage. In the petal fall stage, fruit thinning rates were 18% and 24% for UREA treatments at 6% and 8%, respectively, and 49% and 35% for ATS treatments at 1.25% and 1.50%, respectively. Leaf to fruit ratio (L/FR) increased by 109% and 188% compared to leaf to flower ratio in ATS treatments at 1.25% and 1.50%, respectively, and L/FR increased 93 and 196% in UREA treatments at 6% and 8%, respectively, in the full bloom stage. In the petal fall stage, leaf to fruit ratio increased by 60% to 100% in ATS treatments, but did not significantly differ from the control in UREA treatments. Fruit harvest was delayed in all treatments of all developmental stages except for 1.5% ATS and 6% UREA treatments at the petal fall stage, whose fruit harvest was two or three days faster than the control. CONCLUSION: The application of ATS and UREA for blossom thinning should be in the petal fall and full bloom stages for early and late harvest, respectively. Considering chemical injury, integrated harvesting and fruit size, however, it is appropriate to apply ATS at 1.5% in the petal fall stage to increase fruit productivity and quality in blueberry.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.3
• /
• pp.194-202
• /
• 2009

In this paper, we address an optimization problem and a case study for minimizing the cost of inspections incurred throughout an inspection system, which includes a K-stage inspection system, a source inspection shop, and a re-inspection shop. In order to formulate the inspection cost function, we make a time-based flow analysis between nodes (or shops), and derive the limiting sizes of flows between nodes and limiting defective rates by solving a set of nonlinear balance equations. It turns out that the number of items reworked throughout the inspection system is invariant irrespective of the defective rate of items moved through the K-stage inspection system. Hence we define the inspection cost as the total number of items inspected, and we provide an enumeration method for determining an optimal value of K which minimizes the number of items inspected.

• Proceedings of the Korean Statistical Society Conference
• /
• 2004.11a
• /
• pp.295-300
• /
• 2004

We consider a G/M/1 queue with two-stage service policy. The server starts to serve with rate of ${\mu}1$ customers per unit time until the number of customers in the system reaches A. At this moment, the service rate is changed to that of ${\mu}2$ customers per unit time and this rate continues until the system is empty. We obtain the stationary distribution of the number of customers in the system.