• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.179-189
• /
• 2012

To simulate the transport of pollutant, a numeric model for the advection-diffusion equation with the decay term is developed. This is finite-difference model using the implicit method (with the weight factor ${\alpha}$) and Gauss-Seidel SOR(successive over-relaxation). This model is compared to the analytical solutions (of simpler dimensional or boundary conditions), and in the condition of Peclet number < 5~20, the result shows stable condition, and Crank-Nicolson method (${\alpha}$=0.5) shows the more accurate results than fully-implicit method (${\alpha}$=1). The mass of advection, diffusion and decay is calculated and the error of mass balance is less than 3%. This model can evaluate the 3-D concentrations of the advection-diffusion and decay problems, but this model uses only the finite-difference method with the fixd grid system, so it can be effectively used in the problems with small Peclet numbers like the pollutant transport in groundwater.

• Korean Journal of Materials Research
• /
• v.10 no.2
• /
• pp.160-165
• /
• 2000

We have investigated the electrical and diffusion barrier properties of MgO produced on the surface of Cu (Mg) alloy. Also the diffusion barrier property of the interfacial MgO between Cu alloy and $SiO_2$ has been examined. The results show that the $150\;{\AA}$-MgO layer on the surface remains stable up to $700^{\circ}C$, preventing the interdiffusion of C Cu and Si in Si/MgO/Cu(Mg) structure. It also has the breakdown voltage of 4.5V and leakage current density of $10^{-7}A/\textrm{cm}^2/$. In addition, the combined structure of $Si_3N4(100{\AA})/MgO(100{\AA})$ increases the breakdown voltage up to lOV and reduces the leakage current density to $8{\tiems}10^{-7}A/\textrm{cm}^2$. Furthermore, the interfacial MgO formed by the chemical reac­t tion of Mg and $SiO_2$ reduces the diffusion of copper into $SiO_2$ substrate. Consequently, Cu(Mg) alloy can be applied as a g gate electrode in TFT /LCDs, reducing the process steps.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.473-481
• /
• 1997

Enhanced videomicroscopy was used to observe the dynamic behavior which occurred when water containing pure nonionic surfactant was carefully contacted with equal volumes of polar oils such as oleyl alcohol and oleic acid at various temperatures. A key component of the system is a vertical-stage microscope which provides for stable interfaces by locating the oil above the denser aqueous phase. This arrangement allowed intermediate phases formed at the surface of contact to be clearly observed, as well as any spontaneous emulsification which developed. Contacting experiments with $C_{12}E_5$ as the surfactant and with pure oleyl alcohol and oleic acid soils showed little activity below the cloud point but vigorous activity at higher temperatures including formation of an intermediate lamellar liquid crystalline phase. Diffusion path theory, which allows prediction of spontaneous emulsification resulting from diffusion and of intermediate phase formation during contacting processes, was used to understand the dynamic behavior seen during contacting experiments. Tentative diffusion paths for the contacting experiments with pure oleyl alcohol were presented with the aid of a partial phase diagram of the oleyl alcohol-water-$C_{12}E_5$ system.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.3 s.58
• /
• pp.201-208
• /
• 2006

Propionibacterium acnes have been recognized as pus-forming bacteria triggering an inflammation in acne. The present study was conducted to evaluate antimicrobial activities of Dryopteris crassirhizoma Nakai against these etiologic agents of acne vulgaris and application possibility as a cosmetic resource. D. crassirhizoma crude extract and hexane fraction was prepared and its anti-acne effect against Propionibacterium acnes was investigated with minimum inhibitory concentration (MIC) and paper disk diffusion method. The MIC of D. crassirhizoma crude extract and hexane fraction was 0.008 mg/mL and 0.001 mg/mL, respectively. This implies that D. crassirhizoma extract may be an efficient anti-acne ingredient for cosmetics, as a crude extract. The paper disk diffusion assay showed that its anti-acne effect was similar to that of triclosan. The cytotoxic effect of D. crassirhizoma extract was determined by a colorimetric MTT assay using HaCaT cell line and D. crassirhizoma extract exhibited lower cytotoxic effects. Finally, we examine the stability of D. crassirhizoma extract to temperature and pH. The D. crassirhizoma extract was very stable to high temperatures ($25{\sim}121^{\circ}C$) and to wide pH range ($pH\; 2{\sim}11$), suggesting its utilization for cosmetics.

• Clean Technology
• /
• v.13 no.4
• /
• pp.300-307
• /
• 2007

The combustion characteristics of diffusion flame formed in the wake of a cylindrical stabilizer with varying fuel injection angle were studied. This study was performed by measuring the flame stability limits, lengths and temperatures of recirculation zones of flames, turbulence intensity in the wake of stabilizer, and concentration distribution of combustion gas, and by taking photographs of flames. The flame stability limits are dependent on fuel injection angle and main air velocity. The length and temperature of recirculation zone are dependent on fuel injection angle. As the length of the recirculation zone is decreased, the flame shows more stable behavior. The temperature of recirculation zone has a maximum value at the condition of theoretical mixture. The flame stability is enhanced when the temperature in the recirculation zone decreases. The turbulence intensity in the wake of stabilizer is independent of the fuel injection angle, but it is affected by stabilizer itself and main air flow condition. If the stabilization characteristics of flame is good, the concentration of $C_3H_8$ is high, but the concentration of $CO_2$ is low at the boundary of recirculation zone. The combustion characteristics of diffusion flame can be controlled by changing the fuel injection angles. The appropriate fuel injection angle should be selected to get high combustion efficiency, high load power, low environmental pollution, and clean combustion condition of fuel.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.53-58
• /
• 2006

Agrimonia pilosa Ledeb. is a perennial plant, which naturally habitats in whole area of Korea, and where it is popularly used for the traditional remedies. In the present study, A. pilosa Ledeb. extract was prepared to determine the anti-acne effects and application possibility as a cosmetic resource. A pilosa Ledeb. was extracted with methanol and its anti-acne effect against Propionibacterium acnes was investigated via minimum inhibitory concentration (MIC) and paper disk diffusion method. The MIC of A. pilosa Ledeb. extract and triclosan was 0.05 mg/mL and 0.04 mg/mL, respectively. This implies that A. pilosa Ledeb. extract nay be an efficient anti-acne ingredient for cosmetics, considering that it is a crude extract. The paper disk diffusion assay showed that its anti-acne effect was similar to that of triclosan. Furthermore, A. pilosa Ledeb. extract effectively inhibited the growth of several aerobic microorganisms including Staphylococcus aureus. Finally, we examine the stability of the extract to temperature and pH. The extract was very stable to high temperatures ($70{\sim}121^{\circ}C$) and to pH ($pH 2{\sim}11$), suggesting its utilization for cosmetics.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.75-81
• /
• 1997

It has been used that fluorinated compounds could be applied to cosmetic products. It is that fluorinated conpounds are hydrophobicity and lipophobicity. These fluorinated compounds are reported to form a highly protective and effective film against most aggressive chemical and physical agents. PerfluropolymethyoisopropylEther has homophobicity and are colorless, odorless, tasteless and non-greasy. In this we made a success to formulate the new type of hand care cream using PFPE. PFPE are suitable thickness and chemical inertness to skin. The reason that we select PFPE for this investigation. We developed the new type hand care cream by adsorption and dispersion of PFPE. There are very stable dispersion and highly moisture diffusion control. And these characteristics were verified by actual consumer test.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.2
• /
• pp.159-178
• /
• 2013

We present a model, combining servitization decision and a conventional two-sided market approaches, to understand expected outcomes and current market situations. We suppose an individual manufacturer participates in multiple platforms and decides whether to initiate servitization by considering latent profitability and risk. The analytical results from the model show that increasing competition within servitized companies lead to a servitization equilibrium, wherein the ratio of servitized companies in a market is stable, due to a gradual decline in relative benefits compared to non-servitized companies. This holds even in the case that the number of customer is increasing along the diffusion of servitization, under some restricted conditions.

• Advances in Traditional Medicine
• /
• v.10 no.1
• /
• pp.44-49
• /
• 2010

An examination of the kinetic properties of UDP-glucose, (1,3)-$\beta$-glucans (callose) synthase, from mung bean seedlings (Sorbus commixta cortex) shows that these enzymes have a complex relationship with UDP-glucose and various effectors. Fluorescence assay showed that deoxynojirimycin increased the inhibitory effect of (1,3)-$\beta$-glucan synthase in a concentration-dependent manner. The inhibitory effect of sakuranetin (34.34%) was higher than that of deoxynojirimycin (80.63%). Disk diffusion method revealed that sakuranetin inhibited the growth of Candida albicans to a 1.5 mm inhibition zone. These results suggest that sakuranetin, isolated from Sorbus commixta cortex extract, can be used as stable antifungal material.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.133-140
• /
• 1995

This paper deals with the residual strength characteristics of composite materials under the environment of high temperature and humidity. Two types of GFRP, one with unidirection and randomly oriented, are used to investigate the features of moisture absorption and the residual strength. The results show that, when exposed longterms in high temperature and humidity, the randomly oriented composites is more stable than the unidirection one.