• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.241-246
• /
• 2008

Patient's respiration can have an effect on movement of tumor range and peripheral organs. Therefore, the respiratory signal was acquired by relation between external markers and movement of patient's abdomen during radiational therapy in order to minimize the effect of respiration. Based on this technique, many studies of rational therapy to irradiate at particular part of stable respiratory signals have executed and they have been clinically applied. Nevertheless, the phase-based method is preferred to the amplitude-based method for the rational therapy related to respiration. Because stabilization of the respiratory signal are limited. In this study, a in-house respiratory signal analysis program was developed for the phase reassignment and the analysis of the irregular respiratory signals. Various irregular respiratory patterns was obtained from clinical experimental volunteers. After then, the in-house program analyzed the factors affecting to phase assignment which is directly related to irradiated sector. Subsequently, accuracy of phase assignment was improved with removement of irregular signals by self-developed algorithm. This study is considered to be useful for not only image reconstruction and elevation of irradiating accuracy through phase assignment of RPM system but also analysis of respiratory signals. Moreover, development of 4D CT image is planed with phantom researches or clinical experiments based on this program.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.329-342
• /
• 2004

In this paper, we present preliminary feasibility studies on three types of solar observation payloads for future Korean Science and Technology Satellite (STSAT) programs. The three candidates are (1) an UV imaging telescope, (2) an UV spectrograph, and (3) an X-ray spectrometer. In the case of UV imaging telescope, the most important constraint seems to be the control stability of a satellite in order to obtain a reasonably good spatial resolution. Considering that the current pointing stability estimated from the data of the Far ultraviolet Imaging Spectrograph (FIMS) onboard the Korean STSAT-1, is around 1 arc minutes/sec, we think that it is hard to obtain a spatial resolution sufficient for scientific research by such an UV Imaging Telescope. For solar imaging missions, we realize that an image stabilization system, which is composed of a small guide telescope with limb sensor and a servo controller of secondary mirror, is quite essential for a very good pointing stability of about 0.1 arcsec. An UV spectrograph covering the solar full disk seems to be a good choice in that there is no risk due to poor pointing stability as well as that it can provide us with valuable UV spectral irradiance data valuable for studying their effects on the Earth's atmosphere and satellites. The heritage of the FIMS can be a great advantage of developing the UV spectrograph. Its main disadvantage is that two major missions are in operation or scheduled. Our preliminary investigations show that an X-ray spectrometer for the full disk Sun seems to be the best choice among the three candidates. The reasons are : (1) high temporal and spectral X-ray data are very essential for studying the acceleration process of energetic particles associated with solar flares, (2) we have a good heritage of X-ray detectors including a rocket-borne X-ray detector, (3) in the case of developing countries such as India and Czech, solar X-ray spectrometers were selected as their early stage satellite missions due to their poor pointing stabilities, and (4) there is no planned major mission after currently operating Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) mission. Finally, we present a preliminary design of a solar X-ray spectrometer covering soft X-ray (2 keV) to gamma ray (10 MeV).

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.185-193
• /
• 2016

Purpose of this study is to classify damaged lands according to the cause of the damage and their influences based on characteristic of the damaged lands in DeMilitarized Zone(DMZ) area, and utilize this study as a fundamental study for establishment of ecosystem restoration system. Literature review and field survey have been conducted to review the damage status of DMZ area. For field survey, first year and second year have been conducted, in which type of the damage has been reviewed in this study. In the result, types of damage have been classified into 6 categories: 'alteration of initial landform', 'loss of surface layer', 'land pollution', 'alteration of soil chemical property', 'decline of vegetation', and 'invasion of foreign species'. Restoration for each damage type is as following. First, for alteration of initial landform, the land is restored to the original landform prior to the damage and connection to surrounding ecosystem is considered. Second, for loss of surface layer, lost surface layer is restored or further loss is prevented with stabilization. Third, for land pollution, source of the pollution is eradicated or self-circulation with purification of polluted land is encouraged. Fourth, for alteration of soil chemical property, soil is restored of its original property with eradication of the pollution source and improvement of soil. Fifth, for decline of vegetation, current vegetation and anticipated alteration in future are considered and number of wild species is to be increased based on structure and characteristic of nearby vegetation. Sixth, for invasion of foreign species, prevention of dominance by risky species and facilitation ecological stability with ecological management are to be considered. Influence according to the cause of damage has occurred in secondary(indirect) influence or simultaneous occurrence of several damage types. Considering all these aspects, when type of the damage is complex, restoration process for each of former mentioned 6 damage types with solitary influence should be considered in unison.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.91-100
• /
• 2008

Numerical implementation with a Cartesian cut-cell method is conducted in this study. A Cartesian cut-cell method is an easy and efficient mesh generation methodology for complex geometries. In this method, a background Cartesian grid is employed for most of computational domain and a cut-cell grid is applied for the peculiar grids where the flow characteristics are changed such as solid boundary to enhance the accuracy, applicability and efficiency. Accurate representation of complex geometries can be obtained by using the cut-cell method. The cut-cell grids are constructed with irregular meshes which have various shape and size. Therefore, the finite volume method is applied to numerical discretization on a irregular domain. The HLLC approximate Riemann solver, a Godunov-type finite volume method, is employed to discretize the advection terms in the governing equations. The weighted average flux method applied on the Cartesian cut cell grid for stabilization of the numerical results. To validate the numerical model using the Cartesian cut-cell grids, the model is applied to the rectangular tank problem of which the exact solutions exist. As a comparison of numerical results with the analytical solutions, the numerical scheme well represents flow characteristics such as free surface elevation and velocities in x-and y-directions in a rectangular tank with the Cartesian and cut-cell grids.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.565-572
• /
• 2020

This study developed a software platform using machine learning of artificial intelligence to optimize the distillation column system. The distillation column is representative and core process in the petrochemical industry. Process stabilization is difficult due to various operating conditions and continuous process characteristics, and differences in process efficiency occur depending on operator skill. The process control based on the theoretical simulation was used to overcome this problem, but it has a limitation which it can't apply to complex processes and real-time systems. This study aims to develop an empirical simulation model based on machine learning and to suggest an optimal process operation method. The development of empirical simulations involves collecting big data from the actual process, feature extraction through data mining, and representative algorithm for the chemical process. Finally, the platform for the distillation column was developed with verification through a developed model and field tests. Through the developed platform, it is possible to predict the operating parameters and provided optimal operating conditions to achieve efficient process control. This study is the basic study applying the artificial intelligence machine learning technique for the chemical process. After application on a wide variety of processes and it can be utilized to the cornerstone of the smart factory of the industry 4.0.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1044-1048
• /
• 2008

Bacillus polyfermenticus KJS-2 (Bp2) was isolated from $Bispan^{(R)}$, a commercially available probiotics consisting of more than 4 strains. The objective of this study was to investigate the effect of three-layer coating on the stabilty of Bp2. Bp2 was microencapsulated with sodium alginate using an air atomizer. The Bp2 loaded pellets were also coated with HFP-chitosan and HPMCP for oral delivery system. When compared to the uncoated Bp2, the survival of the three-layer coated Bp2 increased to approximately 63% (p<0.01) in a 30% ethanol solution, 54% (p<0.05) in an artificial gastric juice (pH 2), and 53% (p<0.05) in the bile acid (pH 5). When coated beads were stored at $100^{\circ}C$ and $130^{\circ}C$, Bp2 in coated beads was very stable (p<0.01) compared to uncoated Bp2.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.199-205
• /
• 2015

This study is about ionic water generator filter Recently, a lot of people feel deep interest in health and drinking water. And there are various types of water. Ionic water generator is a system with special function, and can be classified as a medical device and should be manufactured after approval from the Food and Drug Administration. Basically ionized water is different from the packaged and stored water. When the tap water or ground water passes through the various filters of ionic water generator, it turns to the purified water of pH7 ~ 7.5 and we can electrolyze that water into anion and cation by diaphragm. And in negative electrode side, we can get alkaline water with calcium ($Ca^+$), potassium ($K^+$), magnesium ($Mg^+$), sodium ($Na^+$) for body. In general, we can change pH value from 5 to 9 of ionizer by controlling the level of electrolysis voltage in the ionizer. In general, 1stage (pH8), 2stage (pH8.5), 3stage (pH9), 4stage (pH9.5) are used as the alkaline ionized water, -1Stage (pH6.0), -2 stage (pH5.0) are used as the acidic water. But in early stage, the water that passed through filter was weakly alkaline water and that was problem. Therefore, when filter condition is stable, the pH and ORP value of water is different with the early one. the initial setting pH value of the ionizer was confirmed that changes significantly. In order to resolve this problem we need to wash filter for some period time and neutralize by acidification treatment of the filter.

• Korea Journal of Hospital Management
• /
• v.3 no.1
• /
• pp.62-82
• /
• 1998

The purpose of this study is to assess the cause and level of conflict arising within and between departments among administration office workers who work in a recently established tertiary hospitals of a major cooperation or related non-profit cooperation: The study also aimed to find methods for resolution of such conflicts by comparing with other existing university hospitals. The subject population included 299 business administration office workers randomly selected from two cooperate related tertiary hospitals of less than 3 years in its existence and two university hospitals over 700 beds in Seoul and Kyong In area. Data were collected through a survey questionnaire. To define related factors for the level of conflict among departments in each hospitals multivariate regression analysis was conducted. Independent factors were characteristics of subjects, conflicting factors within and between the departments. The results are as follows: 1. Those in the 30-39 rears of age group demonstrated significantly higher level of conflict between departments. Those working in the new hospitals, who were older and had long-term tenure, and those with short-term job experience at current working hospital had higher level of conflict between the departments with statistical significance. 2. Concerning the involvement of conflicting factors and the level of conflict in the administration there was statistically significant positive correlation between reliability and job-related intra- and interdepartmental level of conflict in existing hospitals. There was a significant positive correlation between intradepartmental conflicting factors of mutual dependence, difference in goal/orientation and intra- and interdepartmental level of conflict. 3. In multivariate regression analysis, women more than men, and those who had worked for many years in hospitals had statistically significant influence on factors involved in interdepartmental level of conflict, explaining 51.0% of the model. 4. In existing hospitals, gender was a significant factor with women showing a higher level of interdepartmental conflict compared to men. Among the interdepartmental factors, mutual dependence had statistically significant influence and showed a positive relationship with interdepartmental level of conflict. In the new hospitals, job position was a significant factor which showed that those in high position such as section chief or above, compared to those in managerial or general position had higher level of conflict. Among the interdepartmental characteristics, factors of mutual dependence and goal/orientation had statistically significant influence and showed a positive relationship with interdepartmental level of conflict. In the new hospital setting efforts to reduce conflict in areas among workers with high position, old age, and long tenure and those in Purchasing, Material and Computer Department should be made and prudent management and planning for improved manpower and increased budget or efficient allocation and clear definition of job description are necessary to adequately assess and make improved efforts for rapid stabilization of the premature hospital system from its inception, In the existing hospitals a lack of conflict within and between departments may give rise to stagnation or inefficiency of the organization. Future study are needed with respect to the relationship between interdepartmental level of conflict and the effectiveness of the hospital organization for improved resolution of conflict in the organization and hospital management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.170-177
• /
• 2017

The price of land in Jeju is reaching a new high every day and this phenomenon not only causes real difficulties for the purchase of real estate by local residents, but also results in psychological deprivation. Therefore, this study analyzes the factors causing the increase of the land price in Jeju, in order to examine the measures required to stabilize the land price which is continuously rising. As a result of this study, we developed a land price prediction model including seven variables, including the 'inflation rate', 'interest rate', and 'population'. According to the model, land prices in Jeju are expected to rise steadily, and it is predicted that in 2020 the price will increase to 170% of that in 2015 and will triple by 2025. Based on the results of this study, this study suggested policy alternatives, such as 'Establishing a tourism policy for managing the number of tourists' and 'increasing the approval standards for development activities'. The two policies proposed in this study can be implemented as a regional initiative, which may be less effective than the changes in the national system, but it is meaningful that the efforts to stabilize the land price will continue at the regional level.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2009

The Ministry of Land, Transport and Maritime Affairs(MLTM) project for the DB construction of national geotechnical information was automatically computerized the geotechnical investigation results on the construction site in 2007. So 'the rule for computerizing of geotechnical investigation results and its application' were promoted the establishment and applicable project. It was promoted in earnest that all organization and affiliation of MLTM, local governments included the project because of stabilization of the law from 2008. We have analyzed a application-ratio of geotechnical information about users of geotechnical information system and distribution data and established a plan of applying enhancement for the DB construction and DB utilization in 2008. In this paper, we propose the result for application-ratio analysis and application plan through the application-case study of national geotechnical information DB. In the application-ratio analysis, the analysis in the field shows the most high as 39% in construction planning and preliminary investigation, the analysis in the effect of capabilities shows the most high as 25% in the increased efficiency of business. Also the analysis in the field of application shows the most high as 95% a application-ratio of geotechnical information in architecture and civil.