• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.83-85
• /
• 2008

Redundant spurious loops and overlapping segments in stability lobe diagrams cannot be removed easily by regular methods. A programmatic approach is presented to detect multiple spurious loops occurring within the lobes. They are identified by reorganizing the numerical lobe data into speed-depth corners for subsequent removal. The same principle is then extended to remove overlapping segments of adjacent lobes to obtain a final continuous stability map. Unlike existing methods, the proposed methodology requires no interface with additional editing software, and can also yield stability lobe diagrams more quickly. The methodology is presented with lobe diagrams constructed using milling and turning models.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.7
• /
• pp.1-7
• /
• 2019

A chatter lobe analysis is frequently used to look at the chatter state. Even if there is a lot of research on chatter, chatter lobe characteristics are not well defined. In this study, the chatter lobe behavior according to several variables of vibration mode is verified for further clarity. The dynamic variables of the chatter model are defined and their behaviors on chatter lobe boundary are analyzed in detail. In this sense, the chatter model with 2-DOF (2-DOF) was used to analyze chatter stability characteristics. The discussed results are satisfying and these can be used for the prediction of chatter existence in machining processes of 2-DOF systems in several revolution range. These analyses indicate a better agreement for predicting an appropriate stability lobe over a wide detailed range of critical depths of cut in machining operation. The results allow an excellent prediction of chatter according to various static and dynamic variables in machining states. The behavior of chatter dynamic variables in machining were also discussed in detail. All these results can also be applied to other machining processes by establishing a chatter model in a 2-DOF system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.2
• /
• pp.16-21
• /
• 2006

In this study, the analytic realization of chatter mechanism using radial basis neural network(RBNN) was introduced and compared with the conventional stability analysis. In this regard, the FFT and time series spectrum analysis was used as a criterion for the existence of chatter in end-milling force. The desired coded outputs of chatter was trained and finally converged to desired outputs. The output of the RBNN match well with the conventional desired stability lobe. Using this trained data, the stability boundary of the radial basis neural network was acquired using the contour plotting. As a result, the proposed stability lobe boundary using RBNN consists well with the conventional analytical boundary that is calculated in characteristic equation of transfer function in chatter dynamics. In this RBNN analysis, two input and three output parameters were used in this paper.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.6
• /
• pp.562-569
• /
• 2011

In this study linear and nonlinear dynamic stability characteristics of a medium-size high-speed turbocharger, whose rotor is supported by two 3-lobe journal bearings, are analyzed to evaluate and identify the effects of its bearing design variables. The rotor has the rated speed of 40,500 rpm and maximum continuous speed of 45,000 rpm. At first, utilizing the linear stability analysis method, bearing designs of yielding stable or unstable LogDecs as small as possible are searched by manipulating with machined bearing clearances and preloads. As next, utilizing the nonlinear analysis method, limit cycles of the rotor responses at the rated and maximum continuous speeds are simulated to check their acceptances. Results have shown that for the turbocharger rotor-bearing system considered, the 3-lobe journal bearing design with a smaller machined clearance and a larger preload are preferred for the stable rotor responses. More importantly, since there exists a good correlation between the linear and nonlinear stability analysis results, it is concluded that firstly the linear stability analysis method may be applied to screen quickly the ranges of bearing designs for stable or least unstable solutions and then, lastly the nonlinear stability analysis method may be deployed to check an absolute motion stability in terms of the limit cycle.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.76-83
• /
• 2001

In this study, the static and dynamic characteristics of turning process was modelled and the analytic realization of regen-erative chatter mechanism was discussed. In this regard, we have discussed on the comparative assessment of recursive times series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision turning operation. In this study, simulation and experimental work were performed to show the malfunction behaviors. For this purpose, new Recursive Extended Instrument Variable Method(REIVM) was adopted for the on-line system identification and monitoring of a machining process. Also, we can apply REIVE algorithms in real process for the detection of chatter frequency and dynamic property and analyze the stability lobe of the system by changing a parameter of cutting dynamics in regenerative chatter mechanics, if it is stable or unstable, Also, The stability lobe of chatter was analysed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.7-12
• /
• 2005

This paper presents several time series methods to analyze the chatter mechanics by using the power spectrum of these algorithms considering the cutting dynamics. In this study, several time series models such as AR(burg, forwardbackward, geometric lattice, instrument variable, least square, Yule Walker), ARX(1s, iv4), ARMAX, ARMA, Box Jenkins, Output Error were modeled and compared with one another. Finally, it was proven that time series modelings are also a desirable and reliable algorithm than the other conventional methods(FFT) for the calculation of the chatter mode in turning operation. Also, the spectrum of times series methods is a little bit more powerful than the FFT fer the detection of a high noisy and weak chatter mode. The radial cutting force Fy has been used for spectrum and chatter stability lobe analysis in this study.

• Journal of People, Plants, and Environment
• /
• v.22 no.4
• /
• pp.355-364
• /
• 2019

This study was conducted to find out the effects of agro-healing activities and strolling on the physiological conditions of patients with chronic metabolic diseases. A total of 11 subjects participated in agro-healing activities, and their average age was 49.6±11.3. Changes in their salivary cortisol were compared and analyzed before and after participating in the agro-healing activity program, and it was found that the stress hormone decreased after participating in the program. Differences in brain wave between before and after participating in agro-healing activities and strolling were measured, and the ratio of alpha to high beta (RAHB) of subjects increased in most of the measured points after participating in agro-healing activities. In addition, the increase in the value in the temporal lobe (T3) that controls mortor skills and occipital lobe (O2) that controls visual functions indicates that the activities were effective in improving relaxation and stability. The relative low beta (RLB) power spectrum of subjects also statistically significantly decreased in the right occipital lobe (O2) that controls visual functions, the relative mid beta (RMB) and relative high beta (RHB) power spectrum decreased in the left temporal lobe (T3) and the right occipital lobe (O2). These results indicate that the activities were effective in improving relaxation under no stress and tension. The systolic and diastolic blood pressure of subjects after participating in agro-healing activities decreased from the prehypertension level to the normal level. These results indicate that horticultural activities and visual elements in healing farms, such as agro-healing activities and strolling, have positive impacts on patients with chronic metabolic diseases accompanied with diabetes or high blood pressure by increasing the brain activity and psycho-physiological conditions of participants.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.441-446
• /
• 2015

Chattering during the milling process causes severe problems on both the workpiece and cutting tools. However, chatter vibration is the inevitable phenomenon that operators require the prediction before the process or monitoring system to avoid the chatter in real-time. To predict the chatter vibration with the stability lobe diagram, the dynamic parameters of machine tool are extracted by considering cutting conditions and adapting the material properties. In this study, experimental verifications were taken for various aluminum types with different feed rates to observe the effect of the key parameters. The comparison between experimental results and the predictions was also performed.

• Journal of People, Plants, and Environment
• /
• v.22 no.2
• /
• pp.127-143
• /
• 2019

This study investigates the color stimuli of two varieties of foliage plants by extracting electroencephalogram, electrocardiogram and physiology activity data from 30 participants in their 50s or older. Changes in the physiological activity of subjects against six color stimuli were examined. The stimulus to real green plants 'Silver Queen' was set as the control group, and was compared with other groups including the stimulus to real 'Angel' plants and four stimuli to artificial colors (two color images and color schemes of the same green and red plants). Compared to the five groups, the relative theta power spectrum (RT) and the ratio of alpha to high beta (RAHB) increased in the subjects exposed to real green plants. This result demonstrates that the green plant ('Silver Queen') increases the stability, relaxation, and internal concentration of subjects in a proper state of awakening. The result of this experiment showed a statistically significant difference in the level of RT when subjects were exposed to the groups of real green and red plants. This finding indicates that the green plant increases internal concentration more than the red plant. RT and the relative low beta power spectrum (RLB) in the groups of natural colors were higher than the groups of artificial colors when subjects focused their mind on the two types of real plants. However, the level of relative mid beta power spectrum (RMB), ratio of SMR to theta (RST), ratio of mid beta to theta (RMT), relative high beta power spectrum (RHB), and spectral edge frequency 95% were higher when subjects were exposed to the photos and colors scheme of plants than when they were exposed to real plants. The subjects experienced more "comfortable" emotions when they were looking at plants with green colors. Overall, it is recommended to use the natural colors of real plants in places where which stability and relaxation are required. On the contrary, the artificial colors of plants such as their photos and color schemes are useful in places where a high level of concentration is required in a short period of time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.549-555
• /
• 2006

Three lobe bearings for turbo compressor which appear inner pad damage after field operation has been analysed and redesigned in order to remove the problems. Pre-load and clearance between the pad and journal of the bearing were changed as design parameters from that of the original ones considering suitable maximum temperature and maximum pressure of the bearings. New hearings were manufactured corresponding the redesign. And vibration and temperature were measured according to the API specifications.